Hi. I have a MID that doesn`t support the "original" pl2303.ko file. Do you resolve the problem with your driver?
El sábado, 4 de septiembre de 2010 12:16:35 UTC-3, Xu escribió: > > Hi All, > > I'm trying to connect a PL2303 based USB to serial converter with one > Android MID [1]. > However, the MID does not have driver for it and I do not have the > kernel source for the MID, as it's running 2.6.29 kernel, Inspired by > [2] I built the pl2303.ko file from source code myself. > > The insmod pl2303.ko runs perfect, but when I insert the usb2serial > cable, I found below error message via dmesg: > > <6>usb 2-1: new full speed USB device using dwc_otg and address 2 > <3>usb 2-1: device v067b p2303 is not supported > <6>usb 2-1: configuration #1 chosen from 1 choice > <6>pl2303 2-1:1.0: pl2303 converter detected > <3>pl2303 2-1:1.0: No more free serial devices > <4>pl2303: probe of 2-1:1.0 failed with error -5 > > [1] http://en.smartdevices.com.cn/Products/V5/ > [2] > http://android.modaco.com/content/htc-hero-hero-modaco-com/313133/howto-compiling-tun-tap-driver-for-htc-hero/ > > > Do you know is there something wrong in the pl2303.ko driver I built > or I need further configuration to make the cable works? > > Thanks and Regards, > xu -- -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
