I have Qualcomm 845 board with a USB-C dual. When plugged into my machine, it shows up on lsusb with the following device descriptor:
Bus 001 Device 053: ID 05c6:901d Qualcomm, Inc. Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x05c6 Qualcomm, Inc. idProduct 0x901d bcdDevice 4.09 iManufacturer 1 QCOM iProduct 2 SDA845-MTP _SN:52445467 iSerial 3 a4955fb5 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 55 bNumInterfaces 2 bConfigurationValue 1 iConfiguration 4 DIAG_ADB bmAttributes 0x80 (Bus Powered) MaxPower 500mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 255 Vendor Specific Subclass bInterfaceProtocol 48 iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 1 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 255 Vendor Specific Class bInterfaceSubClass 66 bInterfaceProtocol 1 iInterface 5 ADB Interface Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 0 Device Status: 0x0000 (Bus Powered) I want to change the Interface class for one of the interfaces from Vendor Specific to UVC, so I can essentially use it as a USB webcam. 1. How would I go about editing the 845's device descriptor? 1. Is this doable from the host (Ubuntu), or do I have to do it on the device itself? 2. Is there a file in the source code I can edit to reconfigure the device descriptor? 2. Is there a better alternative to reconfiguring the 845 as a USB webcam to use on an Ubuntu host? Thanks. -- -- unsubscribe: android-porting+unsubscr...@googlegroups.com website: http://groups.google.com/group/android-porting --- You received this message because you are subscribed to the Google Groups "android-porting" group. To unsubscribe from this group and stop receiving emails from it, send an email to android-porting+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/android-porting/e42acac4-e47e-442a-9af5-8026f640ee3e%40googlegroups.com.