Supposedly Angstrom works on the Nokia 770 and N800, which have the screen res. It does not yet work on the N810, failing to boot (AFAICT), while the screen slowly goes black.
On Sun, Mar 23, 2008 at 4:41 AM, CK Sim <[EMAIL PROTECTED]> wrote: > Hi, > > I am using Atmel AT91SAM9261 part for my custom board (similar to > AT91SAM9261EK board) with a 7" LCD with resolution 800x480. > > I have used an angstrom distribution (compiled for AT91SAM9261EK board > which > can be found in www.linux4sam.org) on my board. > > The LCD on the AT91SAM9261EK board is a 320x240 board. The angstrom > distribution works fine. > > I have modified the kernel accordingly to support my 800x480 LCD. I have > tested it on a buildroot filesystem and the framebuffer drivers and LCD > hardware are fine. > > I have spent a lot of time trying to figure out how my 800x480 LCD can be > supported under the angstrom filesystem package but still unsuccessful. > > FYI, when the "gpe-dm " is started, I noted that the LCD controller seems > to > be disabled (e.g. the LCD was initially blank but turns into a unknown > state > when gpe-dm is started). > > Has anyone used the angstrom on a LCD of 800x480 or larger ? > > Really appreciate any help on this. > > Thanks in advance. > > Best Regards. > > Sim CK > > > _______________________________________________ > Angstrom-distro-devel mailing list > Angstrom-distro-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel > _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
