The following changes since commit c6251231c603256eff6ccd0181c20bb182f9e03b:

  gstreamer-ti: use MEMARGS variable instead of hardcoding omap3
config (2011-09-16 16:04:42 +0200)

are available in the git repository at:
  git://github.com/jadonk/meta-texasinstruments.git for-koen

Jason Kridner (1):
      [meta-ti] linux-3.0: use die-id for BeagleBoard-xM eth mac

 ...e-add-support-for-beagleboard-xM-revision.patch |    6 +-
 ...OMAP3-beagle-add-support-for-expansionboa.patch |    6 +-
 ...0003-HACK-OMAP3-beagle-switch-to-GPTIMER1.patch |    6 +-
 .../0004-OMAP3-beagle-HACK-add-in-1GHz-OPP.patch   |    6 +-
 ...5-omap3-Add-basic-support-for-720MHz-part.patch |    6 +-
 ...Set-dto-to-max-value-of-14-to-avoid-SD-Ca.patch |   33 ++++
 ...add-cpu-id-register-to-MAC-address-helper.patch |   89 ++++++++++
 ...BeagleBoard-Fix-up-random-or-missing-MAC-.patch |  156 ++++++++++++++++++
 ...3630-PRM-add-ABB-PRM-register-definitions.patch |    4 +-
 ...P3-PM-VP-generalize-PRM-interrupt-helpers.patch |    4 +-
 ...P3-PRM-add-tranxdone-IRQ-handlers-for-ABB.patch |    4 +-
 ...P3-ABB-Adaptive-Body-Bias-structures-data.patch |    4 +-
 ...-OMAP3-OPP-add-ABB-data-to-voltage-tables.patch |    4 +-
 ...3-Voltage-add-ABB-data-to-voltage-domains.patch |    4 +-
 ...3-ABB-initialization-transition-functions.patch |    4 +-
 ...-OMAP3-Voltage-add-ABB-to-voltage-scaling.patch |    4 +-
 ...01-Enabling-Hwmon-driver-for-twl4030-madc.patch |    4 +-
 .../madc/0002-mfd-twl-core-enable-madc-clock.patch |    4 +-
 ...nking-error-in-twl-common.c-for-OMAP2-3-4.patch |    4 +-
 ...-introduce-function-to-free-cpufreq-table.patch |    6 +-
 ...q-ensure-driver-initializes-after-cpufreq.patch |    4 +-
 ...PUfreq-ensure-policy-is-fully-initialized.patch |    4 +-
 .../0004-OMAP3-PM-CPUFreq-driver-for-OMAP3.patch   |    4 +-
 ...AP-PM-CPUFREQ-Fix-conditional-compilation.patch |    4 +-
 ...-cpufreq-fixup-after-new-OPP-layer-merged.patch |    4 +-
 ...q-Split-OMAP1-and-OMAP2PLUS-CPUfreq-drive.patch |    4 +-
 ...cpufreq-Add-SMP-support-to-cater-OMAP4430.patch |    4 +-
 ...pufreq-Fix-typo-when-attempting-to-set-mp.patch |    4 +-
 ...P2-cpufreq-move-clk-name-decision-to-init.patch |    4 +-
 ...-cpufreq-deny-initialization-if-no-mpudev.patch |    4 +-
 ...012-OMAP2-cpufreq-dont-support-freq_table.patch |    4 +-
 ...3-OMAP2-cpufreq-only-supports-OPP-library.patch |    4 +-
 ...-OMAP2-cpufreq-put-clk-if-cpu_init-failed.patch |    4 +-
 .../0015-OMAP2-cpufreq-fix-freq_table-leak.patch   |    4 +-
 ...eq-Remove-superfluous-check-in-target-for.patch |    4 +-
 ...ufreq-notify-even-with-bad-boot-frequency.patch |    4 +-
 ...req-Enable-all-CPUs-in-shared-policy-mask.patch |    4 +-
 ...eq-update-lpj-with-reference-value-to-avo.patch |    4 +-
 ...egulator-supply-definitions-in-mach-omap2.patch |    4 +-
 ...style-supply.dev-assignments-common-in-hs.patch |    4 +-
 ...parate-init_irq-functions-to-avoid-cpu_is.patch |    6 +-
 ...parate-timer-init-functions-to-avoid-cpu_.patch |    8 +-
 ...05-omap-Move-dmtimer-defines-to-dmtimer.h.patch |    4 +-
 ...-subset-of-dmtimer-functions-into-inline-.patch |    4 +-
 ...7-omap2-Use-dmtimer-macros-for-clockevent.patch |    4 +-
 .../0008-omap2-Remove-gptimer_wakeup-for-now.patch |    4 +-
 ...OMAP3-SR-make-notify-independent-of-class.patch |    4 +-
 ...010-OMAP3-SR-disable-interrupt-by-default.patch |    4 +-
 ...1-OMAP3-SR-enable-disable-SR-only-on-need.patch |    4 +-
 .../0012-OMAP3-SR-fix-cosmetic-indentation.patch   |    4 +-
 ...ve-clocksource-and-timesource-and-initial.patch |    4 +-
 ...-omap2-Use-dmtimer-macros-for-clocksource.patch |    4 +-
 ...p2-Remove-omap2_gp_clockevent_set_gptimer.patch |    4 +-
 ...e-timer-gp.c-into-timer.c-to-combine-time.patch |    4 +-
 .../0017-omap-cleanup-NAND-platform-data.patch     |    4 +-
 ...omap-board-omap3evm-Fix-compilation-error.patch |    4 +-
 .../0019-omap-mcbsp-Drop-SPI-mode-support.patch    |    4 +-
 ...map-mcbsp-Drop-in-driver-transfer-support.patch |    4 +-
 .../voltdm/0021-omap2-fix-build-regression.patch   |    4 +-
 ...w-twl-common-for-common-TWL-configuration.patch |    6 +-
 ...common-twl6030-configuration-to-twl-commo.patch |    4 +-
 ...ve-common-twl-configuration-to-twl-common.patch |    4 +-
 ...common-regulator-configuration-to-twl-com.patch |    4 +-
 ...mcbsp-Remove-rx_-tx_word_length-variables.patch |    4 +-
 .../0027-omap-mcbsp-Remove-port-number-enums.patch |    4 +-
 .../0028-OMAP-dmtimer-add-missing-include.patch    |    4 +-
 ...P2-hwmod-Fix-smart-standby-wakeup-support.patch |    4 +-
 ...4-hwmod-data-Add-MSTANDBY_SMART_WKUP-flag.patch |    4 +-
 ...-Enable-module-in-shutdown-to-access-sysc.patch |    4 +-
 ...-Do-not-write-the-enawakeup-bit-if-SYSC_H.patch |    4 +-
 ...wmod-Remove-_populate_mpu_rt_base-warning.patch |    4 +-
 ...4-OMAP2-hwmod-Fix-the-HW-reset-management.patch |    4 +-
 ...-OMAP-hwmod-Add-warnings-if-enable-failed.patch |    4 +-
 ...-Move-pr_debug-to-improve-the-readability.patch |    4 +-
 ...use-a-null-structure-record-to-terminate-.patch |    4 +-
 ...share-identical-omap_hwmod_addr_space-arr.patch |    4 +-
 ...use-a-terminator-record-with-omap_hwmod_m.patch |    4 +-
 ...share-identical-omap_hwmod_mpu_irqs-array.patch |    4 +-
 ...use-a-terminator-record-with-omap_hwmod_d.patch |    4 +-
 ...share-identical-omap_hwmod_dma_info-array.patch |    4 +-
 ...share-identical-omap_hwmod_class-omap_hwm.patch |    4 +-
 ...-data-Fix-L3-interconnect-data-order-and-.patch |    4 +-
 ...-OMAP4-hwmod-data-Remove-un-needed-parens.patch |    4 +-
 .../0046-OMAP4-hwmod-data-Fix-bad-alignement.patch |    4 +-
 ...-data-Align-interconnect-format-with-regu.patch |    4 +-
 ...48-OMAP4-clock-data-Add-sddiv-to-USB-DPLL.patch |    4 +-
 ...-data-Remove-usb_host_fs-clkdev-with-NULL.patch |    4 +-
 ...-data-Re-order-some-clock-nodes-and-struc.patch |    4 +-
 ...ck-data-Fix-max-mult-and-div-for-USB-DPLL.patch |    4 +-
 ...OMAP4-prcm-Fix-errors-in-few-defines-name.patch |    4 +-
 ...MAP4-prm-Remove-wrong-clockdomain-offsets.patch |    4 +-
 ...54-OMAP4-powerdomain-data-Fix-indentation.patch |    4 +-
 ...move-RESTORE-macros-to-avoid-access-from-.patch |    4 +-
 ...6-OMAP4-prcm_mpu-Fix-indent-in-few-macros.patch |    4 +-
 ...domain-data-Fix-data-order-and-wrong-name.patch |    4 +-
 ...evice-replace-_find_by_pdev-with-to_omap_.patch |    4 +-
 ...OMAP-PM-remove-OMAP_PM_NONE-config-option.patch |    4 +-
 ...-data-Remove-McASP2-McASP3-and-MMC6-clock.patch |    4 +-
 ...MAP4-clock-data-Remove-UNIPRO-clock-nodes.patch |    4 +-
 ...62-OMAP4-hwmod-data-Modify-DSS-opt-clocks.patch |    4 +-
 ...itialise-sleep_switch-to-a-non-valid-valu.patch |    4 +-
 ...domain-data-Fix-core-mem-states-and-missi.patch |    4 +-
 ...-data-Keep-GPMC-clocks-always-enabled-and.patch |    4 +-
 ...domain-data-Remove-unsupported-MPU-powerd.patch |    4 +-
 ...AP4-hwmod-data-Change-DSS-main_clk-scheme.patch |    4 +-
 ...et-hwmod-flags-to-only-allow-16-bit-acces.patch |    4 +-
 ...ncrease-omap_i2c_dev_attr-flags-from-u8-t.patch |    4 +-
 ...AP2-Introduce-I2C-IP-versioning-constants.patch |    4 +-
 ...MAP2-create-omap-I2C-functionality-flags-.patch |    4 +-
 ...ag-all-OMAP2-hwmod-defintions-with-I2C-IP.patch |    4 +-
 ...dd-correct-functionality-flags-to-all-oma.patch |    4 +-
 ...d-fix-the-i2c-reset-timeout-during-bootup.patch |    4 +-
 ...evice-Create-clkdev-entry-for-hwmod-main_.patch |    4 +-
 ...-data-Add-missing-divider-selection-for-a.patch |    4 +-
 ...AP4-hwmod-data-Add-clock-domain-attribute.patch |    4 +-
 ...OMAP2-hwmod-Init-clkdm-field-at-boot-time.patch |    4 +-
 ...-Replace-CLKCTRL-absolute-address-with-of.patch |    4 +-
 ...hwmod-Wait-the-idle-status-to-be-disabled.patch |    4 +-
 ...-Replace-RSTCTRL-absolute-address-with-of.patch |    4 +-
 ...eplace-warm-reset-API-with-the-offset-bas.patch |    4 +-
 ...083-OMAP4-prm-Remove-deprecated-functions.patch |    4 +-
 ...wmod-data-Add-PRM-context-register-offset.patch |    4 +-
 ...-data-Add-modulemode-entry-in-omap_hwmod-.patch |    4 +-
 ...m-Add-two-new-APIs-for-modulemode-control.patch |    4 +-
 ...-Introduce-the-module-control-in-hwmod-co.patch |    4 +-
 ...omain-Remove-redundant-call-to-pwrdm_wait.patch |    4 +-
 ...domain-Add-2-APIs-to-control-clockdomain-.patch |    4 +-
 ...0090-OMAP2-clockdomain-add-clkdm_in_hwsup.patch |    4 +-
 ...P2-PM-idle-clkdms-only-if-already-in-idle.patch |    4 +-
 ...domain-Add-per-clkdm-lock-to-prevent-conc.patch |    4 +-
 ...-allow-per-SoC-clock-init-code-to-prevent.patch |    4 +-
 ...-Follow-the-recommended-PRCM-module-enabl.patch |    4 +-
 ...bugfs-node-to-show-the-summary-of-all-clo.patch |    4 +-
 ...hwmod-remove-unused-voltagedomain-pointer.patch |    4 +-
 ...ge-move-PRCM-mod-offets-into-VC-VP-struct.patch |    4 +-
 ...ge-move-prm_irqst_reg-from-VP-into-voltag.patch |    4 +-
 ...ge-start-towards-a-new-voltagedomain-laye.patch |    4 +-
 ...ltage-rename-mpu-voltagedomain-to-mpu_iva.patch |    4 +-
 ...MAP3-voltagedomain-data-add-wakeup-domain.patch |    4 +-
 ...oltage-add-scalable-flag-to-voltagedomain.patch |    4 +-
 ...domain-add-voltagedomain-to-struct-powerd.patch |    4 +-
 ...oltage-domains-and-connect-to-powerdomain.patch |    4 +-
 ...MAP3-powerdomain-data-add-voltage-domains.patch |    4 +-
 ...MAP4-powerdomain-data-add-voltage-domains.patch |    4 +-
 ...domain-add-voltage-domain-lookup-during-r.patch |    4 +-
 ...ge-keep-track-of-powerdomains-in-each-vol.patch |    4 +-
 ...ge-split-voltage-controller-VC-code-into-.patch |    4 +-
 ...ge-move-VC-into-struct-voltagedomain-misc.patch |    4 +-
 ...ge-enable-VC-bypass-scale-method-when-VC-.patch |    4 +-
 ...ge-split-out-voltage-processor-VP-code-in.patch |    4 +-
 ...pport-PMICs-with-separate-voltage-and-com.patch |    4 +-
 ...RM-VP-functions-for-checking-clearing-VP-.patch |    4 +-
 ...place-transaction-done-check-clear-with-V.patch |    4 +-
 ...M-add-register-access-functions-for-VC-VP.patch |    4 +-
 ...ge-convert-to-PRM-register-access-functio.patch |    4 +-
 ...C-cleanup-i2c-slave-address-configuration.patch |    4 +-
 ...eanup-PMIC-register-address-configuration.patch |    4 +-
 ...pass-use-fields-from-VC-struct-instead-of.patch |    4 +-
 ...-cleanup-voltage-setup-time-configuration.patch |    4 +-
 ...ve-on-onlp-ret-off-command-configuration-.patch |    4 +-
 ...AP3-VC-abstract-out-channel-configuration.patch |    4 +-
 ...ge-domain-move-PMIC-struct-from-vdd_info-.patch |    4 +-
 ...ke-I2C-config-programmable-with-PMIC-spec.patch |    4 +-
 ...-handle-mutant-channel-config-for-OMAP4-M.patch |    4 +-
 ...e-last-nominal-voltage-setting-to-get-cur.patch |    4 +-
 ...eanup-move-VP-instance-into-voltdm-misc.-.patch |    4 +-
 ...voltage-remove-unneeded-debugfs-interface.patch |    4 +-
 ...ruct-omap_vp_common-replace-shift-with-__.patch |    4 +-
 ...ve-SoC-specific-sys-clock-rate-retreival-.patch |    4 +-
 ...ve-timing-calculation-config-into-VP-init.patch |    4 +-
 ...eate-VP-helper-function-for-updating-erro.patch |    4 +-
 ...0134-OMAP3-VP-remove-omap_vp_runtime_data.patch |    4 +-
 ...ve-voltage-scale-function-pointer-into-st.patch |    4 +-
 ...6-OMAP-VP-Explicitly-mask-VPVOLTAGE-field.patch |    4 +-
 ...P3-VP-update_errorgain-return-error-if-VP.patch |    4 +-
 ...P3-VP-remove-unused-omap_vp_get_curr_volt.patch |    4 +-
 ...mbine-setting-init-voltage-into-common-fu.patch |    4 +-
 ...ge-rename-scale-and-reset-functions-using.patch |    4 +-
 ...ge-move-rename-curr_volt-from-vdd_info-in.patch |    4 +-
 ...AP3-voltdm-final-removal-of-omap_vdd_info.patch |    4 +-
 ...ge-rename-omap_voltage_get_nom_volt-voltd.patch |    4 +-
 ...ge-update-nominal-voltage-in-voltdm_scale.patch |    4 +-
 ...PM-TWL6030-fix-voltage-conversion-formula.patch |    4 +-
 ...AP4-PM-TWL6030-fix-uv-to-voltage-for-0x39.patch |    4 +-
 ...7-OMAP4-PM-TWL6030-address-0V-conversions.patch |    4 +-
 ...-OMAP4-PM-TWL6030-fix-ON-RET-OFF-voltages.patch |    4 +-
 .../0149-OMAP4-PM-TWL6030-add-cmd-register.patch   |    4 +-
 ...isplay-single-block-read-console-messages.patch |    6 +-
 ...-omap_device-activate-dectivate-latency-m.patch |    6 +-
 ...dd-bootarg-for-selecting-svideo-or-compos.patch |    6 +-
 ...iminate-noisey-uncorrectable-error-messag.patch |    6 +-
 .../sakoman/0005-video-add-timings-for-hd720.patch |    6 +-
 ...-smsc911x-return-ENODEV-if-device-is-not-.patch |    6 +-
 ...ut-touchscreen-ads7846-return-ENODEV-if-d.patch |    6 +-
 ...08-Revert-omap2_mcspi-Flush-posted-writes.patch |    6 +-
 ...-threaded-IRQ-remove-IRQ-enable-in-interr.patch |   57 +++++++
 ...0-rtc-twl-Fix-registration-vs.-init-order.patch |  122 ++++++++++++++
 ...Enable-audio-capture-by-default-for-twl40.patch |    6 +-
 ...odecs-twl4030-Turn-on-mic-bias-by-default.patch |    6 +-
 ...l4030-move-clock-input-selection-prior-to.patch |    6 +-
 ...l-add-support-for-backup-battery-recharge.patch |   12 +-
 ...001-ARM-L2-Add-and-export-outer_clean_all.patch |    4 +-
 ...ix-build-break-caused-by-update_mode-remo.patch |   44 +++++
 ...ays-Add-support-for-ThreeFiveCorp-S9700-D.patch |  170 --------------------
 .../ulcd/0002-omap3-beagle-added-lcd-driver.patch  |   72 --------
 ...d-Set-LCD-power-enable-GPIO-in-board-file.patch |   49 ------
 ...004-Make-fbset-show-correct-timing-values.patch |   40 -----
 recipes-kernel/linux/linux_3.0.bb                  |   40 +++---
 208 files changed, 942 insertions(+), 768 deletions(-)
 create mode 100644
recipes-kernel/linux/linux-3.0/beagle/0006-omap_hsmmc-Set-dto-to-max-value-of-14-to-avoid-SD-Ca.patch
 create mode 100644
recipes-kernel/linux/linux-3.0/beagle/0007-OMAP2-add-cpu-id-register-to-MAC-address-helper.patch
 create mode 100644
recipes-kernel/linux/linux-3.0/beagle/0008-HACK-OMAP2-BeagleBoard-Fix-up-random-or-missing-MAC-.patch
 create mode 100644
recipes-kernel/linux/linux-3.0/sakoman/0009-rtc-twl-Use-threaded-IRQ-remove-IRQ-enable-in-interr.patch
 create mode 100644
recipes-kernel/linux/linux-3.0/sakoman/0010-rtc-twl-Fix-registration-vs.-init-order.patch
 create mode 100644
recipes-kernel/linux/linux-3.0/ulcd/0001-OMAP_VOUT-Fix-build-break-caused-by-update_mode-remo.patch
 delete mode 100644
recipes-kernel/linux/linux-3.0/ulcd/0001-omap2-displays-Add-support-for-ThreeFiveCorp-S9700-D.patch
 delete mode 100644
recipes-kernel/linux/linux-3.0/ulcd/0002-omap3-beagle-added-lcd-driver.patch
 delete mode 100644
recipes-kernel/linux/linux-3.0/ulcd/0003-lcd-Set-LCD-power-enable-GPIO-in-board-file.patch
 delete mode 100644
recipes-kernel/linux/linux-3.0/ulcd/0004-Make-fbset-show-correct-timing-values.patch

_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel

Reply via email to