> I am building on angstrom next which builds that kernel using the > xfce-nm-image that is slightly modified. I have no issues using the 3.2 > kernel. Is there no error messages or logs? No errors i found. The boot log is attached (this is the second boot of that image). I have a lot of USB devices, all of them are recognized, except the mouse and keyboard. These are the input devices:
root@beagleboard:~# ls -lR /dev/input/ /dev/input/: drwxr-xr-x 2 root root 60 Jan 1 00:27 by-path crw-r----- 1 root root 13, 64 Jan 1 00:27 event0 crw-r----- 1 root root 13, 63 Jan 1 00:27 mice /dev/input/by-path: lrwxrwxrwx 1 root root 9 Jan 1 00:27 platform-omap_i2c.1-platform-twl4030_pwrbutton-event -> ../event0 root@beagleboard:~# After the boot, i have a console login on the screen, but cannot use it without keyboard. Executing the 'init 5' command: root@beagleboard:~# init 5 root@beagleboard:~# crond[437]: /etc/init.d/crond: line 22: /etc/init.d/functions: No such file or directory nfsserver[438]: creating NFS state directory: done nfsserver[438]: starting 8 nfsd kernel threads: done nfsserver[438]: starting mountd: done nfsserver[438]: starting statd: done and that's all, no change on the screen. The /dev/fb0 works otherwise. So, this build seems incompatible with Beagleboard. All default settings are used, the image is 'systemd-gnome-image' and some additional packages. Regards Gyorgy Kovesdi
SPL 2011.12-dirty (May 14 2012 - 21:35:14) Texas Instruments Revision detection unimplemented OMAP SD/MMC: 0 reading u-boot.img reading u-boot.img U-Boot 2011.12-dirty (May 14 2012 - 21:35:14) OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max CPU Clock 720 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Beagle Rev C4 timed out in wait_for_pin: I2C_STAT=0 I2C read: I/O error Unrecognized expansion board: 0 timed out in wait_for_pin: I2C_STAT=0 I2C read: I/O error Unrecognized expansion board: 0 Die ID #30b6000400000000040373050e00400e Net: Net Initialization Skipped No ethernet found. Hit any key to stop autoboot: 1 0 SD/MMC found on device 0 reading uEnv.txt 0 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 4368496 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Angstrom/3.2.16/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 4368432 Bytes = 4.2 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 3.2.16 (kgy@linux-8cfk) (gcc version 4.5.4 20120305 (prerelease) (GCC) ) #1 Tue May 15 20:04:24 CEST 2012 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Beagle expansionboard: unknown [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3430/3530 ES3.1 (l2cache iva sgx neon isp ) [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 60416 [ 0.000000] Kernel command line: console=ttyO2,115200n8 mpurate=720 buddy=unknown camera=lbcm3m1 vram=12M omapfb.mode=dvi:800x480MR-16@60 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 1048576 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 238MB = 238MB total [ 0.000000] Memory: 231600k/231600k available, 30544k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB) [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB) [ 0.000000] .text : 0xc0008000 - 0xc0739a50 (7367 kB) [ 0.000000] .init : 0xc073a000 - 0xc0780000 ( 280 kB) [ 0.000000] .data : 0xc0780000 - 0xc07da590 ( 362 kB) [ 0.000000] .bss : 0xc07da5b4 - 0xc0897694 ( 757 kB) [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] NR_IRQS:410 nr_irqs:410 410 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] sched_clock: 32 bits at 32kHz, resolution 30517ns, wraps every 131071999ms [ 0.000000] Console: colour dummy device 80x30 [ 0.000183] Calibrating delay loop... 515.72 BogoMIPS (lpj=2015232) [ 0.040527] pid_max: default: 32768 minimum: 301 [ 0.040802] Security Framework initialized [ 0.040863] AppArmor: AppArmor initialized [ 0.041137] Mount-cache hash table entries: 512 [ 0.041717] Initializing cgroup subsys cpuacct [ 0.041748] Initializing cgroup subsys memory [ 0.041809] Initializing cgroup subsys devices [ 0.041839] Initializing cgroup subsys freezer [ 0.041839] Initializing cgroup subsys blkio [ 0.041870] Initializing cgroup subsys perf_event [ 0.041992] CPU: Testing write buffer coherency: ok [ 0.043670] devtmpfs: initialized [ 0.048248] print_constraints: dummy: [ 0.048645] NET: Registered protocol family 16 [ 0.048889] GPMC revision 5.0 [ 0.050781] OMAP GPIO hardware version 2.5 [ 0.052581] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.054138] OMAP3 Beagle Rev: C4 [ 0.057861] Reprogramming SDRC clock to 332000000 Hz [ 0.060333] Found NAND on CS0 [ 0.060363] Registering NAND on CS0 [ 0.060729] Unable to get DVI reset GPIO [ 0.060913] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.065856] omap-mcbsp.2: alias fck already exists [ 0.066070] omap-mcbsp.3: alias fck already exists [ 0.067596] Calibrating delay loop (skipped) already calibrated this CPU [ 0.067718] Switched to new clocking rate (Crystal/Core/MPU): 26.0/332/720 MHz [ 0.067871] OMAP DMA hardware revision 4.0 [ 0.074493] bio: create slab <bio-0> at 0 [ 0.075714] SCSI subsystem initialized [ 0.076873] usbcore: registered new interface driver usbfs [ 0.077026] usbcore: registered new interface driver hub [ 0.077178] usbcore: registered new device driver usb [ 0.077941] omap_i2c omap_i2c.1: bus 1 rev1.3.12 at 2600 kHz [ 0.080383] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.080474] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.080993] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.081359] _omap_mux_init_gpio: Could not set gpio192 [ 0.084014] print_constraints: VUSB1V5: 1500 mV normal standby [ 0.084411] print_constraints: VUSB1V8: 1800 mV normal standby [ 0.084777] print_constraints: VUSB3V1: 3100 mV normal standby [ 0.086456] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.087188] print_constraints: VMMC1: 1850 <--> 3150 mV at 3150 mV normal standby [ 0.087554] print_constraints: VDAC: 1800 mV normal standby [ 0.087921] print_constraints: VAUX2_4030: 1800 mV normal [ 0.088317] print_constraints: VDVI: 1800 mV normal standby [ 0.088775] print_constraints: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.089111] omap_i2c omap_i2c.2: bus 2 rev1.3.12 at 400 kHz [ 0.105285] omap_i2c omap_i2c.3: bus 3 rev1.3.12 at 100 kHz [ 0.106384] NetLabel: Initializing [ 0.106384] NetLabel: domain hash size = 128 [ 0.106384] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.106445] NetLabel: unlabeled traffic allowed by default [ 0.106506] Switching to clocksource 32k_counter [ 0.121032] AppArmor: AppArmor Filesystem Enabled [ 0.132904] musb-hdrc: version 6.0, ?dma?, otg (peripheral+host) [ 0.144866] musb-hdrc musb-hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.145172] NET: Registered protocol family 2 [ 0.145477] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.146301] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.146453] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.146545] TCP: Hash tables configured (established 8192 bind 8192) [ 0.146575] TCP reno registered [ 0.146575] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.146606] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.146911] NET: Registered protocol family 1 [ 0.147308] RPC: Registered named UNIX socket transport module. [ 0.147338] RPC: Registered udp transport module. [ 0.147338] RPC: Registered tcp transport module. [ 0.147338] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.147644] omap_dsp_init: 600000 bytes @ 8ee00000 [ 0.149261] audit: initializing netlink socket (disabled) [ 0.149322] type=2000 audit(0.140:1): initialized [ 0.324157] VFS: Disk quotas dquot_6.5.2 [ 0.324432] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.327758] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 0.327789] fuse init (API version 7.17) [ 0.329620] Btrfs loaded [ 0.329681] msgmni has been set to 452 [ 0.331207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 0.331298] io scheduler noop registered [ 0.331329] io scheduler deadline registered [ 0.331390] io scheduler cfq registered (default) [ 0.332275] OMAP DSS rev 2.0 [ 0.335083] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.336242] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.336486] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.336761] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.057281] console [ttyO2] enabled [ 1.061553] [drm] Initialized drm 1.1.0 20060810 [ 1.073577] brd: module loaded [ 1.080627] loop: module loaded [ 1.087188] twl4030_madc twl4030_madc: clk disabled, enabling [ 1.095031] omap2-nand driver initializing [ 1.099731] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron NAND 256MiB 1,8V 16-bit) [ 1.108825] Creating 5 MTD partitions on "omap2-nand.0": [ 1.114379] 0x000000000000-0x000000080000 : "X-Loader" [ 1.121337] 0x000000080000-0x000000260000 : "U-Boot" [ 1.128295] 0x000000260000-0x000000280000 : "U-Boot Env" [ 1.135040] 0x000000280000-0x000000680000 : "Kernel" [ 1.142456] 0x000000680000-0x000010000000 : "File System" [ 1.224304] OneNAND driver initializing [ 1.228942] usbcore: registered new interface driver cdc_ether [ 1.235198] usbcore: registered new interface driver rndis_host [ 1.241516] cdc_ncm: 04-Aug-2011 [ 1.244934] usbcore: registered new interface driver cdc_ncm [ 1.251281] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 3.271087] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.277343] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.285369] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.302520] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.308624] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.315826] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.323516] usb usb1: Product: OMAP-EHCI Host Controller [ 3.329162] usb usb1: Manufacturer: Linux 3.2.16 ehci_hcd [ 3.334899] usb usb1: SerialNumber: ehci-omap.0 [ 3.340240] hub 1-0:1.0: USB hub found [ 3.344329] hub 1-0:1.0: 3 ports detected [ 3.373291] Initializing USB Mass Storage driver... [ 3.378509] usbcore: registered new interface driver usb-storage [ 3.384918] USB Mass Storage support registered. [ 3.389923] usbcore: registered new interface driver libusual [ 3.396179] udc: OMAP UDC driver, version: 4 October 2004 (iso) (dma) [ 3.403381] mousedev: PS/2 mouse device common for all mice [ 3.411712] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input0 [ 3.423553] i2c /dev entries driver [ 3.427886] Linux media interface: v0.10 [ 3.432128] lirc_dev: IR Remote Control driver registered, major 249 [ 3.438995] Driver for 1-wire Dallas network protocol. [ 3.445281] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.452453] twl4030_wdt twl4030_wdt: Failed to register misc device [ 3.459136] twl4030_wdt: probe of twl4030_wdt failed with error -16 [ 3.466796] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-de...@redhat.com [ 3.476165] cpuidle: using governor ladder [ 3.480438] cpuidle: using governor menu [ 3.484710] sdhci: Secure Digital Host Controller Interface driver [ 3.491302] sdhci: Copyright(c) Pierre Ossman [ 3.671478] usb 1-2: new high-speed USB device number 2 using ehci-omap [ 3.720550] omap_hsmmc: probe of omap_hsmmc.1 failed with error -16 [ 3.730499] oprofile: hardware counters not available [ 3.735931] oprofile: using timer interrupt. [ 3.741546] TCP cubic registered [ 3.746063] NET: Registered protocol family 10 [ 3.752990] NET: Registered protocol family 17 [ 3.757965] Registering the dns_resolver key type [ 3.762939] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 3.771209] ThumbEE CPU extension supported. [ 3.775695] Registering SWP/SWPB emulation handler [ 3.789062] sr_init: No PMIC hook to init smartreflex [ 3.794708] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 3.803070] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 3.811370] SmartReflex Class3 initialized [ 3.820983] clock: disabling unused clocks to save power [ 3.827789] registered taskstats version 1 [ 3.832336] fbcvt: 800x480@60: CVT Name - .384M9-R [ 3.852966] Console: switching to colour frame buffer device 100x30 [ 3.869842] regulator_init_complete: VDAC: incomplete constraints, leaving on [ 3.877471] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 3.885040] Waiting for root device /dev/mmcblk0p2... [ 3.892822] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 3.899932] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 3.907531] usb 1-2: Product: USB2.0 Hub [ 3.913269] hub 1-2:1.0: USB hub found [ 3.917968] hub 1-2:1.0: 4 ports detected [ 4.209136] usb 1-2.1: new full-speed USB device number 3 using ehci-omap [ 4.222229] mmc0: new high speed SDHC card at address b368 [ 4.228698] mmcblk0: mmc0:b368 SD08G 7.41 GiB [ 4.235717] mmcblk0: p1 p2 p3 [ 4.331451] kjournald starting. Commit interval 5 seconds [ 4.337341] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 4.351074] EXT3-fs (mmcblk0p2): using internal journal [ 4.356597] EXT3-fs (mmcblk0p2): mounted filesystem with ordered data mode [ 4.363922] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 4.372589] devtmpfs: mounted [ 4.376434] Freeing init memory: 280K [ 4.384765] usb 1-2.1: New USB device found, idVendor=054c, idProduct=0066 [ 4.392120] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 4.399932] usb 1-2.1: Product: Gavrio USB Burner [ 4.404968] usb 1-2.1: Manufacturer: Teledigit BT. [ 4.409973] usb 1-2.1: SerialNumber: 00000002 Welcome to The Ångström Distribution! Starting LSB: The RPC portmapper... Starting udev Coldplug all Devices... Starting Temporary Directory... Started Apply Kernel Variables [ OK ] Started Set Up Additional Binary Formats [ OK ] Starting File System Check on Root Device... Starting POSIX Message Queue File System... Starting Debug File System... Started Huge Pages File System [ OK ] Starting Load Kernel Modules... Starting Journal Service... Started Journal Service [ OK ] Starting udev Kernel Device Manager... Starting Remount API VFS... Started Temporary Directory [ OK ] Started File System Check on Root Device [ OK ] Started POSIX Message Queue File System [ OK ] Started LSB: The RPC portmapper [ OK ] [ 5.424896] udevd[60]: starting version 182 Started udev Kernel Device Manager [ OK ] Started Debug File System [ OK ] Started Load Kernel Modules [ OK ] Started Remount API VFS [ OK ] Starting FUSE Control File System... Started Configuration File System [ OK ] Starting Remount Root FS... Started FUSE Control File System [ OK ] Started udev Coldplug all Devices [ OK ] portmap[45]: Starting portmap daemon... Started Remount Root FS [ OK ] Started Run pending postinsts [ OK ] Starting Load Random Seed... Starting Recreate Volatile Files and Directories... Started Machine ID first boot configure [ OK ] Started Load Random Seed [ OK ] Started Recreate Volatile Files and Directories [ OK ] Starting Console System Startup Logging... Starting Restore Sound Card State... Starting Avahi mDNS/DNS-SD Stack... Starting xinetd.service... Starting Timestamping service... Started Timestamping service [ OK ] Started SSH Key Generation [ OK ] Starting Permit User Sessions... Starting Login Service... Starting LSB: Kernel NFS server support... Starting D-Bus System Message Bus... Started Console System Startup Logging [ OK ] Started Permit User Sessions [ OK ] Started Restore Sound Card State [ OK ] Started D-Bus System Message Bus [ OK ] xinetd[90]: Starting internet superserver: xinetd. Started xinetd.service [ OK ] nfsserver[96]: creating NFS state directory: done Started Avahi mDNS/DNS-SD Stack [ OK ] Started Login Service [ OK ] [ 11.703124] Installing knfsd (copyright (C) 1996 o...@monad.swb.de). [ 11.833282] svc: failed to register lockdv1 RPC service (errno 97). [ 11.856781] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory [ 11.865539] NFSD: unable to find recovery directory /var/lib/nfs/v4recovery [ 11.872924] NFSD: starting 90-second grace period nfsserver[96]: starting 8 nfsd kernel threads: done nfsserver[96]: starting mountd: done nfsserver[96]: starting statd: done Failed to start LSB: Kernel NFS server support [FAILED] See 'systemctl status nfsserver.service' for details. Starting pvr-init.service... pvr-init[175]: Starting PVR [ 13.249267] twl_rtc twl_rtc: rtc core: registered twl_rtc as rtc0 Started pvr-init.service [ OK ] Starting LSB: run cron daemon... crond[281]: /etc/init.d/crond: line 22: /etc/init.d/functions: No such file or directory Failed to start LSB: run cron daemon [FAILED] See 'systemctl status crond.service' for details. Starting Serial Getty on ttyO2... Started Serial Getty on ttyO2 .---O---. | | .-. o o | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution beagleboard ttyO2 Angstrom v2012.05 - Kernel 3.2.16 beagleboard login: Starting Getty on tty1... Started Getty on tty1 [ OK ] [ 24.500427] usb 1-2.2: new high-speed USB device number 4 using ehci-omap [ 24.630645] usb 1-2.2: New USB device found, idVendor=9710, idProduct=7830 [ 24.637817] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 24.645568] usb 1-2.2: Product: USB-MAC Controller [ 24.651031] usb 1-2.2: Manufacturer: Moschip Semiconductor [ 24.656890] usb 1-2.2: SerialNumber: 3b2003b2 [ 24.748443] usb 1-2.3: new full-speed USB device number 5 using ehci-omap [ 24.929992] usb 1-2.3: new high-speed USB device number 6 using ehci-omap [ 25.056274] usb 1-2.3: New USB device found, idVendor=05e3, idProduct=0608 [ 25.063568] usb 1-2.3: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 25.071380] usb 1-2.3: Product: USB2.0 Hub [ 25.079376] hub 1-2.3:1.0: USB hub found [ 25.084594] hub 1-2.3:1.0: 4 ports detected [ 25.179626] usb 1-2.4: new high-speed USB device number 7 using ehci-omap [ 25.306823] usb 1-2.4: New USB device found, idVendor=19d2, idProduct=1181 [ 25.314147] usb 1-2.4: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 25.321960] usb 1-2.4: Product: K3772-Z [ 25.326110] usb 1-2.4: Manufacturer: Vodafone [ 25.330627] usb 1-2.4: SerialNumber: 1296BFEFEA4FA1C362D155E0D6CB284DC6F70C79 [ 25.345489] cdc_ether 1-2.4:1.5: usb0: register 'cdc_ether' at usb-ehci-omap.0-2.4, CDC Ethernet Device, 02:4f:a1:c3:62:d1 [ 25.360931] scsi0 : usb-storage 1-2.4:1.7 [ 25.459320] usb 1-2.3.1: new high-speed USB device number 8 using ehci-omap [ 25.596862] usb 1-2.3.1: New USB device found, idVendor=1516, idProduct=8628 [ 25.604400] usb 1-2.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 25.612396] usb 1-2.3.1: Product: USB Drive [ 25.616882] usb 1-2.3.1: Manufacturer: SKYMEDI [ 25.621520] usb 1-2.3.1: SerialNumber: 09 [ 25.629699] scsi1 : usb-storage 1-2.3.1:1.0 [ 25.719421] usb 1-2.3.2: new low-speed USB device number 9 using ehci-omap [ 25.740264] cdc_acm 1-2.4:1.1: ttyACM0: USB ACM device [ 25.782958] cdc_acm 1-2.4:1.3: ttyACM1: USB ACM device [ 25.794921] usbcore: registered new interface driver cdc_acm [ 25.800842] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 25.860351] usb 1-2.3.2: New USB device found, idVendor=04f2, idProduct=0402 [ 25.867889] usb 1-2.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 25.875885] usb 1-2.3.2: Product: USB Keyboard [ 25.880676] usb 1-2.3.2: Manufacturer: Chicony [ 25.983764] usb 1-2.3.3: new low-speed USB device number 10 using ehci-omap [ 26.114593] usb 1-2.3.3: New USB device found, idVendor=1c4f, idProduct=0003 [ 26.121948] usb 1-2.3.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 26.129943] usb 1-2.3.3: Product: Usb Mouse [ 26.134460] usb 1-2.3.3: Manufacturer: SIGMACHIP [ 26.227020] usb 1-2.3.4: new high-speed USB device number 11 using ehci-omap [ 26.367584] scsi 0:0:0:0: CD-ROM Vodafone USB SCSI CD-ROM 0001 PQ: 0 ANSI: 0 [ 26.378387] usb 1-2.3.4: New USB device found, idVendor=148f, idProduct=5370 [ 26.385925] usb 1-2.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 26.393890] usb 1-2.3.4: Product: 802.11 n WLAN [ 26.398773] usb 1-2.3.4: Manufacturer: TPlink [ 26.403320] usb 1-2.3.4: SerialNumber: 1.0 [ 26.415710] sr0: scsi3-mmc drive: 0x/0x caddy [ 26.420471] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 26.440643] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 26.620635] cfg80211: Calling CRDA to update world regulatory domain [ 26.639526] scsi 1:0:0:0: Direct-Access SKYMEDI USB Drive 1.0 PQ: 0 ANSI: 2 [ 26.664672] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 26.673522] sd 1:0:0:0: [sda] 15769600 512-byte logical blocks: (8.07 GB/7.51 GiB) [ 26.682922] sr0: CDROM (ioctl) error, command: Xpwrite, Read disk info 51 00 00 00 00 00 00 00 02 00 [ 26.692687] sr: Sense Key : Hardware Error [current] [ 26.698150] sr: Add. Sense: No additional sense information [ 26.704559] sd 1:0:0:0: [sda] Write Protect is off [ 26.716644] sd 1:0:0:0: [sda] No Caching mode page present [ 26.722381] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 26.751068] sd 1:0:0:0: [sda] No Caching mode page present [ 26.756988] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 26.770263] sda: sda1 [ 26.782562] sd 1:0:0:0: [sda] No Caching mode page present [ 26.788513] sd 1:0:0:0: [sda] Assuming drive cache: write through [ 26.795043] sd 1:0:0:0: [sda] Attached SCSI removable disk [ 27.053070] usb 1-2.3.4: reset high-speed USB device number 11 using ehci-omap [ 27.277343] usbcore: registered new interface driver rt2800usb .---O---. | | .-. o o | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution beagleboard ttyO2 Angstrom v2012.05 - Kernel 3.2.16 beagleboard login: root Last login: Thu Jan 1 00:27:32 UTC 1970 on ttyO2 root@beagleboard:~# init 5 root@beagleboard:~# crond[408]: /etc/init.d/crond: line 22: /etc/init.d/functions: No such file or directory nfsserver[409]: creating NFS state directory: done nfsserver[409]: starting 8 nfsd kernel threads: done nfsserver[409]: starting mountd: done nfsserver[409]: starting statd: done
_______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel