On Sun, Aug 19, 2012 at 8:43 AM, Edward Vidal <vidal.devel...@gmail.com> wrote: > Hello, > I built both a systemd-gnome-image & xfce-nm-image. > Neither of these boot to the boot prompt or to the HDMI display. > This is what I see with on the serial boot. > U-Boot SPL 2011.12-dirty (Aug 18 2012 - 17:09:47) > Texas Instruments Revision detection unimplemented > OMAP SD/MMC: 0 > timed out in wait_for_bb: I2C_STAT=1000 > reading u-boot.img > reading u-boot.img > > > U-Boot 2011.12-dirty (Aug 18 2012 - 17:09:47) > > OMAP3630/3730-GP ES1.2, CPU-OPP2, L3-165MHz, Max CPU Clock 1 Ghz > OMAP3 Beagle board + LPDDR/NAND > I2C: ready > DRAM: 512 MiB > NAND: 0 MiB > MMC: OMAP SD/MMC: 0 > *** Warning - readenv() failed, using default environment > > In: serial > Out: serial > Err: serial > Beagle xM Rev C > No EEPROM on expansion board > No EEPROM on expansion board > Die ID # > 158000029ff800000160a7450b02602d > Net: Net Initialization Skipped > No ethernet found. > Hit any key to stop autoboot: 0 > The user button is currently NOT pressed. > SD/MMC found on device 0 > reading uEnv.txt > > 206 bytes read > Loaded environment from uEnv.txt > Importing environment from mmc ... > Loading file "/boot/uImage" from mmc device 0:2 xxa2 > 4385640 bytes read > Booting from mmc ... > ## Booting kernel from Legacy Image at 80200000 ... > Image Name: Angstrom/3.2.18/beagleboard > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 4385576 Bytes = 4.2 MiB > Load Address: 80008000 > Entry Point: 80008000 > Verifying Checksum ... OK > Loading Kernel Image ... OK > OK > > Starting kernel ... >
is your console setup properly ttyO2 ... > Uncompressing Linux... done, booting the kernel. > > OE Build Configuration: > BB_VERSION = "1.15.2" > TARGET_ARCH = "arm" > TARGET_OS = "linux-gnueabi" > MACHINE = "pandaboard" > DISTRO = "angstrom" > DISTRO_VERSION = "v2012.05" > TUNE_FEATURES = "armv7a vfp neon cortexa9" > TARGET_FPU = "vfp-neon" > meta-angstrom = > "angstrom-v2012.05-yocto1.2:b69da4d8c4976fed568fe58aee5df89b140d5c94" > meta-oe > toolchain-layer > meta-efl > meta-gpe > meta-gnome > meta-xfce > meta-initramfs = "denzil:6e434777018b81bbd7873e7278f05425de18558a" > meta-opie = "master:efa3892b20a4ef80274e56e5633ebd62c16f9731" > meta-java = "master:3386ea6c96096f107f43f282f654e5afa456109e" > meta-browser = "master:c47f59df2e723495679c751cbdf6a8c6adec4b6a" > meta-mono = "master:83f8233b0498aadb18bf7605c3ba6c71d9e13a3a" > meta-kde = "master:5b0882d951cfd71886d423c190faaa7c7f932333" > meta-ti = "denzil:9c103ce85a6ecb836bcdc46137207e466846ee2e" > meta-efikamx = "master:2c09a3a780b23448e8a6ca964256ff7f5ccba65d" > meta-nslu2 = "master:3d9fc951b05b4df476374b6fc3085ebac7f293ee" > meta-htc > meta-nokia > meta-openmoko > meta-palm = "master:2b106be01228f64298d6cb338f93088806594344" > meta-handheld = "master:1f05a15aceb4c3a19fa070463b58125b5658b2a9" > meta-raspberrypi = "denzil:34eef2ea4f5f24630dbb73b386861430167b8431" > meta-intel > meta-sugarbay > meta-crownbay > meta-emenlow > meta-fishriver > meta-fri2 > meta-jasperforest > meta-n450 = "master:f75f9b6f68473eb0efac802409608f8389be0030" > meta = "denzil:741146fa90f28f7ce8d82ee7f7e254872d519724" > Thanks in advance Any help will be appreciated. > _______________________________________________ > Angstrom-distro-devel mailing list > Angstrom-distro-devel@linuxtogo.org > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel