All,
Thanks very much for all the answers to my previous questions. I'm trying to install the Angstrom image on the BeagleBoard Black. I could not locate the official instructions, and using instead the instructions at http://derekmolloy.ie/building-angstrom-for-beaglebone-from-source/ does not work with the latest version of the code. So first question: where are the official install instructions located? You may not want to read the rest until I adjust my SD card per official instructions J. But here is my setup-scripts/deploy/eglibc/images/beaglebone: [root@antigone beaglebone]# ls -l total 508280 -rw-r--r-- 1 andrei eng 261818534 Jan 29 10:56 Angstrom-Cloud9-IDE-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.gz -rw-r--r-- 1 andrei eng 179101888 Jan 29 11:00 Angstrom-Cloud9-IDE-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.xz -rw-r--r-- 1 andrei eng 20707144 Jan 29 13:05 Angstrom-systemd-image-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.gz -rw-r--r-- 1 andrei eng 14584240 Jan 29 13:05 Angstrom-systemd-image-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.xz lrwxrwxrwx 1 andrei eng 64 Jan 29 11:00 Cloud9-IDE-beaglebone.tar.gz -> Angstrom-Cloud9-IDE-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.gz lrwxrwxrwx 1 andrei eng 64 Jan 29 11:00 Cloud9-IDE-beaglebone.tar.xz -> Angstrom-Cloud9-IDE-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.xz lrwxrwxrwx 1 andrei eng 22 Jan 22 23:05 MLO -> MLO-beaglebone-2014.01 lrwxrwxrwx 1 andrei eng 22 Jan 22 23:05 MLO-beaglebone -> MLO-beaglebone-2014.01 -rwxr-xr-x 1 andrei eng 104044 Jan 22 23:05 MLO-beaglebone-2014.01 -rw-r--r-- 1 andrei eng 38995185 Jan 22 22:08 modules--3.8.13-r23z.2-beaglebone-20140122224739.tgz -rw-r--r-- 1 andrei eng 294 Jan 29 13:04 README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt lrwxrwxrwx 1 andrei eng 67 Jan 29 13:06 systemd-image-beaglebone.tar.gz -> Angstrom-systemd-image-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.gz lrwxrwxrwx 1 andrei eng 67 Jan 29 13:06 systemd-image-beaglebone.tar.xz -> Angstrom-systemd-image-eglibc-ipk-v2013.06-beaglebone.rootfs.tar.xz -rwxr-xr-x 1 andrei eng 383968 Jan 22 23:05 u-boot-beaglebone-2014.01-r0.img lrwxrwxrwx 1 andrei eng 32 Jan 22 23:05 u-boot-beaglebone.img -> u-boot-beaglebone-2014.01-r0.img lrwxrwxrwx 1 andrei eng 32 Jan 22 23:05 u-boot.img -> u-boot-beaglebone-2014.01-r0.img lrwxrwxrwx 1 andrei eng 51 Jan 22 22:08 zImage -> zImage--3.8.13-r23z.2-beaglebone-20140122224739.bin -rw-r--r-- 1 andrei eng 4741656 Jan 22 22:08 zImage--3.8.13-r23z.2-beaglebone-20140122224739.bin lrwxrwxrwx 1 andrei eng 51 Jan 22 22:08 zImage-beaglebone.bin -> zImage--3.8.13-r23z.2-beaglebone-20140122224739.bin I've formatted my 2G SD card with mkcard.txt from http://downloads.angstrom-distribution.org/demo/beaglebone/, copied u-boot.img and MLO on the 1st (vfat) partition of the SD card, and unpacked Cloud9-IDE-beaglebone.tar.gz on the 2nd (linux ext) partition. Yet I can't figure out where the kernel image zImage is supposed to go. And without the kernel on the SD card, it won't boot. Thanks, Andrei _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
