On 5/2/2014 6:58 AM, Koen Kooi wrote:
Op 2 mei 2014, om 08:13 heeft Koen Kooi <k...@dominion.thruhere.net> het
volgende geschreven:
Op 1 mei 2014, om 20:55 heeft Bob Feretich <bob.feret...@rafresearch.com> het
volgende geschreven:
The current BeagleBone Angstrom build is failing.
*** No rule to make target `/usr/lib/perl/5.14.3/Config.pm', needed by
`perl.mak'. Stop.
I saw some e-mail from Koen regarding an OE-core patch to prevent a parallel
make for /dev-tools/git recipe.
The downloaded version of the recipe had the patch except for the below...
+# The perl portion fails with -j16
+PARALLEL_MAKEINST = ""
+
I'm still looking at this. Do you have the git perl tools installed on your
host?
The basic perl-Git package was installed on my host.
However I did not have a /usr/lib/perl/ directory.
This should be fixed now
I tried...
MACHINE=beaglebone ./oebb.sh update
bitbake cloud9-gnome-image -c clean
bitbake cloud9-gnome-image
... and the same error occurred.
I notice that
meta-perl =
"angstrom-staging-yocto1.5:b7edb9540426c281f479a8cdc8a69f0e2812ee74"
Could this be preventing me from seeing your fix?
Or, do I need to erase the entire setup-scripts directory and start over?
If so, it will be about 48 hrs before I find out if the problem is fixed.
Build Configuration:
BB_VERSION = "1.20.0"
BUILD_SYS = "x86_64-linux"
NATIVELSBSTRING = "Fedora-20"
TARGET_SYS = "arm-angstrom-linux-gnueabi"
MACHINE = "beaglebone"
DISTRO = "angstrom"
DISTRO_VERSION = "v2013.12"
TUNE_FEATURES = "armv7a vfp thumb neon callconvention-hard"
TARGET_FPU = "vfp-neon"
meta-angstrom =
"angstrom-v2013.12-yocto1.5:dab3707b49b38112a9768a4c11b6d19266d9dadb"
meta-oe
meta-efl
meta-gpe
meta-gnome
meta-xfce
meta-initramfs
toolchain-layer
meta-multimedia
meta-networking
meta-webserver
meta-ruby
meta-filesystems
meta-perl =
"angstrom-staging-yocto1.5:b7edb9540426c281f479a8cdc8a69f0e2812ee74"
meta-kde = "master:f45abfd4d87b0132a2565499392d2d49f465d847"
meta-opie = "master:b241408b31c2ffd941b8b38bd385136ef675a703"
meta-java = "dora:d86d17c9d13d1117b484cb36f884709ce585a3e0"
meta-browser = "master:fc3969f63bda343c38c40a23f746c560c4735f3e"
meta-mono = "master:ac286b1682e6bcc486ceb30ef90a936949bbfeab"
meta-qt5 = "dora:5b5616b63bdf163ea3eb2ca8857c56a393435fe3"
meta-systemd =
"angstrom-staging-yocto1.5:b7edb9540426c281f479a8cdc8a69f0e2812ee74"
meta-ros = "master:64c8b5edb221263e7fac7c03629c730ade422dff"
meta-beagleboard-extras
common-bsp = "dora:0e46a24b5f299f84e8043b4438f8fbc117a2627d"
meta-ti =
"angstrom-staging-yocto1.5:a05532600ea769c0349e526e024304f50c1fdf8c"
meta-fsl-arm =
"angstrom-staging-yocto1.5:48b91b77e9e37eea88637fe403d0a6b0f35dbee9"
meta-fsl-arm-extra = "dora:251c07f9d868e0100ccf74fd1706269c8d6911fb"
meta-nslu2 = "master:bdcb4297ddb22f4eecddd4d8436cf9b6c6111922"
meta-htc
meta-nokia
meta-openmoko
meta-palm = "master:537d0c2ab41284012e1ba79716b085a861a6812a"
meta-handheld = "master:5b5e68a93aae1016f5ac1d057a721b2dbf30b8d8"
meta-intel
meta-sugarbay
meta-crownbay
meta-emenlow
meta-fri2
meta-jasperforest
meta-n450 = "dora:569d49422d529be58b09ab71401b799c5b8f674e"
meta-sunxi = "master:dc663bd5d8bd873012c90da8a9f6afc49e8a0ca6"
meta-raspberrypi = "dora:1c696a95f16337e4168a045479a386194d32e18f"
meta-minnow = "dora:9aa60d0eaf03fe30670acf581eaf7e57c76b5f99"
meta-dominion = "master:6731c0401fe4f29daf698e36f96e1fedb981a2ad"
meta-linaro
meta-linaro-toolchain = "dora:95421121ccf1277cdbcb00828ac2be6ba7dde18b"
meta-beagleboard-extras = "dora:0e46a24b5f299f84e8043b4438f8fbc117a2627d"
meta =
"angstrom-staging-yocto1.5:7c838993654b80b8e1ca076b7d91b6cd1cc18b0e"
NOTE: Preparing runqueue
NOTE: Executing SetScene Tasks
NOTE: Executing RunQueue Tasks
ERROR: Function failed: do_install (log file is located at
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/log.do_install.12937)
ERROR: Logfile of failure stored in:
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/log.do_install.12937
Log data follows:
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common',
'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function do_install
| NOTE: make NO_PYTHON=1 RUNTIME_PREFIX=1 NO_GETTEXT=1 install
DESTDIR=/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/image
bindir=/usr/bin template_dir=/usr/share/git-core/templates
GIT_PYTHON_DIR=/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/image/usr/share/git-core/python
| GEN perl/PM.stamp
| GEN git-add--interactive
| make[2]: *** No rule to make target `/usr/lib/perl/5.14.3/Config.pm',
needed by `perl.mak'. Stop.
| make[1]: *** [instlibdir] Error 2
| make: *** [git-add--interactive] Error 2
| ERROR: oe_runmake failed
| WARNING:
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/run.do_install.12937:1
exit 1 from
| exit 1
| ERROR: Function failed: do_install (log file is located at
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/log.do_install.12937)
Regards,
Bob
regards,
Koen
So I added these statements to the recipe... No joy. the build continues to
fail the same way.
Regards,
Bob Feretich
| ./check_bindir "z$bindir" "z$execdir" "$bindir/git-add"
| NOTE: make NO_PYTHON=1 RUNTIME_PREFIX=1 NO_GETTEXT=1 install
DESTDIR=/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/image
bindir=/usr/bin
| make[1]: Entering directory
`/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/git-1.9.0/perl'
| make[1]: *** No rule to make target `/usr/lib/perl/5.14.3/Config.pm', needed
by `perl.mak'. Stop.
| make[1]: Leaving directory
`/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/git-1.9.0/perl'
| make: *** [install] Error 2
| ERROR: oe_runmake failed
| WARNING:
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/run.do_install.29988:1
exit 1 from
| exit 1
| ERROR: Function failed: do_install (log file is located at
/home/Bob/AngstromBBB1/setup-scripts/build/tmp-angstrom_v2013_12-eglibc/work/armv7ahf-vfp-neon-angstrom-linux-gnueabi/git/1.9.0-r0/temp/log.do_install.29988)
ERROR: Task 708
(/home/Bob/AngstromBBB1/setup-scripts/sources/openembedded-core/meta/recipes-devtools/git/git_1.9.0.bb,
do_install) failed with exit code '1'
_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
_______________________________________________
Angstrom-distro-devel mailing list
Angstrom-distro-devel@linuxtogo.org
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
