Dear Koen, I tried using the emmc-prepare.sh from , $sources/meta-beagleboard/contrib/boneflashtool/emmc-prepare.sh
I did the angstrom build and i have the result as shown below gibson@debian:~$ cd deploy/glibc/images/beaglebone/ gibson@debian:~/deploy/glibc/images/beaglebone$ ls Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.manifest Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.tar.gz Angstrom-systemd-GNOME-image-glibc-ipk-v2015.06-beaglebone.rootfs.tar.xz MLO MLO-beaglebone MLO-beaglebone-2014.07 modules--4.1.4-r0.2-beaglebone-20151117052341.tgz modules-beaglebone.tgz README_-_DO_NOT_DELETE_FILES_IN_THIS_DIRECTORY.txt systemd-GNOME-image-beaglebone.manifest systemd-GNOME-image-beaglebone.tar.gz systemd-GNOME-image-beaglebone.tar.xz u-boot-beaglebone-2014.07-r0.img u-boot-beaglebone.img u-boot.img zImage zImage--4.1.4-r0.2-am335x-bone-20151117052341.dtb zImage--4.1.4-r0.2-am335x-boneblack-20151117052341.dtb zImage--4.1.4-r0.2-am335x-bonegreen-20151117052341.dtb zImage--4.1.4-r0.2-beaglebone-20151117052341.bin zImage-am335x-boneblack.dtb zImage-am335x-bone.dtb zImage-am335x-bonegreen.dtb zImage-beaglebone.bin When I made neccesary changes and in the emmc-prepare,sh and run as root like ./emmc-prepare.sh I get the following as the output, root@debian:/home/gibson/sources/meta-beagleboard/contrib/bone-flash-tool# ./emmc-prepare.sh Using 2015.11.17-DO-NOT-USE-FOR-PRODUCTION as identifier Trying to attach image file read error, sector 0 llseek error llseek error llseek error Loopdev: Incorrect partitioning, /dev/mapper/p1 not found *Where am I making the mistake, need your guidance to create the BBB-eMMC-flasher.img.xz for the above build...* Regards, Gibson -- Regards, Gibson.J _______________________________________________ Angstrom-distro-devel mailing list Angstrom-distro-devel@linuxtogo.org http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-devel
