well i've tried my wl110 under angstrom and it doesn't seem so easy: perhaps we could try to follow this bug report: http://bugs.openembedded.org/show_bug.cgi?id=2159
and try something like "prism2_srec wlan0 -r /etc/pcmcia/rf010804.hex" will load firmware to RAM of card. taking some files here: http://linux.junsun.net/intersil-prism/firmware/1.4.9/ have to try... jean-paul wrote: > i've same result than you > however my card IS working with my wep AP, at least under Sharp Rom, > pdaxii13 and openBSD > i'll try under Angstrom asap > > see you > JP > > > Ger Apeldoorn wrote: > >> [EMAIL PROTECTED]:~$ hostap_diag wlan0 >> Host AP driver diagnostics information for 'wlan0' >> >> NICID: id=0x800c v1.0.0 (PRISM II (2.5) PCMCIA (SST parallel flash)) >> PRIID: id=0x0015 v1.1.0 >> STAID: id=0x001f v1.4.2 (station firmware) >> >> The station firmware is the problem, I need > 1.7.0 for WEP... >> >> Ger. >> >> Jpmatrix schreef: >> >> >>> Strange , i have the same card and it is working out of the box with All >>> distros...Even angstrom . . >>> How do you check the firmware level ? I don t see it on the card >>> >>> ------- Original message ------- >>> From: Ger Apeldoorn <[EMAIL PROTECTED]> >>> Sent: 3.5.'07, 11:51 >>> >>> >>> >>>> Hi all, >>>> >>>> I've bought myself a new wlan card for my SL-C3100. (Asus WL-110) >>>> Unfortunately, the firmware is ancient and does not support WEP. >>>> (Version 1.4.2) >>>> >>>> So I need to upgrade the firmware, but cannot do so with the prism2_srec >>>> tool because the option is not compiled in the hostap driver. >>>> >>>> This part is from the hostap FAQ: >>>> http://hostap.epitest.fi/cgi-bin/viewcvs.cgi/*checkout*/hostap/FAQ?rev=HEAD&content-type=text/plain >>>> ---------------%<--------------- >>>> utils/prism2_srec (run 'make' in utils directory to build this) is a >>>> tool that can be instructed Host AP driver to download firmware image >>>> into the wlan card. Brief usage information is available by running >>>> this program without any command line parameters. Please note, that >>>> the downloading support is disabled in the default Host AP driver >>>> build. You will need to change this by defining >>>> PRISM2_DOWNLOAD_SUPPORT (and PRISM2_NON_VOLATILE_DOWNLOAD if you want >>>> to update flash); see driver/modules/hostap_config.h for more details. >>>> ---------------%<--------------- >>>> >>>> I cannot find this file, nor am I not too happy about compiling and >>>> updating the kernel for a simple flashing of the firmware... >>>> >>>> Your tips are very welcome.... Thanks! >>>> >>>> Ger >>>> >>>> >>>> _______________________________________________ >>>> Angstrom-distro-users mailing list >>>> [email protected] >>>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users >>>> >>>> >>> _______________________________________________ >>> Angstrom-distro-users mailing list >>> [email protected] >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users >>> >>> >>> >> >> > > _______________________________________________ > Angstrom-distro-users mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users > > _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
