Paul Sokolovsky ha scritto:
> Ok, there're 2 issues: 1) sleeve is not supported in the current kernel
> release, this is known issue expected to be resolved with one of next
> kernel upgrades. 2) ext2/3 drivers are not built into kernel, so
> initramfs must be used.
I compiled a kernel with EXT3 embedded, but if Sleeve support is buggy,
it'impossible to boot.
>
> Exact commands to use those with HH.org bootloader are up to you
> though, and please share them with the list once you'll have working
> setup.
I investigated HH bootloader and source and I found it cannot boot from
second H5000 flash as it knows of a single flash.
Now I would like to:
1) load the kernel from CF (HH bootloader does it)
2) tell the kernel to load the second flash as root
I tried with these kernel params:
root=/dev/mtdblock/2 noinitrd console=ttyS0,115200
and
root=/dev/mtdblock2 noinitrd console=ttyS0,115200
but none worked.
I also tried to correct the line in /etc/fstab to load the second flash
aprtition instead of rootfs.
Any more suggestion?
Thank you
Stefano
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
