Sorry for the long message! I flash my Akita with Angstrom 2007.12 release. Works fine.
I tried my Planex GW-CF11X wifi card and it does not work. It does work on Poky (3.0) after some tweeking: http://dab.free.fr/wp/?p=43 (In French) Works out of the box on pdaXii13 and Cacko 1.23. It never worked on OpenZaurus! I first tried it without any modification and nothing happens. I then applied the same tweeking from Poky on Angstrom but it does not work.My Wireless router can not find my Akita as an attached device. The card is recognized: pccardctl ident Socket 0: product info: "PLANEX COMMUNICATIONS INC.", "PLANEX GW-CF11X Wireless CF Card", "", "" manfid: 0xd601, 0x0010 function: 6 (network) pccardctl status: Socket 0: 3.3V 16-bit PC Card Subdevice 0 (function 0) bound to driver "hostap_cs" >From dmesg: <7>hostap_cs: assuming no Primary image in flash - card initialization not completed <7>wifi0: test Genesis mode with HCR 0x1f <7>Readback test succeeded, HCR 0x1f <5>pccard: card ejected from slot 0 <7>wifi0: card already removed or not configured during shutdown <5>pccard: PCMCIA card inserted into slot 0 <5>pcmcia: registering new device pcmcia0.0 <7>hostap_cs: setting Vcc=33 (constant) <7>Checking CFTABLE_ENTRY 0x01 (default 0x01) <7>IO window settings: cfg->io.nwin=1 dflt.io.nwin=1 <7>io->flags = 0x0047, io.base=0x0000, len=128 <6>hostap_cs: Registered netdevice wifi0 <4>pcmcia: request for exclusive IRQ could not be fulfilled. <4>pcmcia: the driver needs updating to supported shared IRQ lines. <6>hostap_cs: index 0x01: , irq 169, io 0xc48a0000-0xc48a007f <7>hostap_cs: assuming no Primary image in flash - card initialization not completed <7>wifi0: test Genesis mode with HCR 0x1f <7>prism2_pccard_cor_sreset: original COR 41 <7>prism2_pccard_genesis_sreset: original COR 41 <7>Readback test failed, HCR 0x1f write 00 e1 a1 ff read 00 ce a1 ce <7>wifi0: test Genesis mode with HCR 0x0f <7>prism2_pccard_cor_sreset: original COR 41 <7>prism2_pccard_genesis_sreset: original COR 41 <7>Readback test succeeded, HCR 0x0f <7>prism2_pccard_genesis_sreset: original COR 41 <7>wifi0: registered netdevice wlan0 <7>wifi0: cannot get RID fd0b (len=1008) - no PRI f/w <7>prism2_download: dl_cmd=4 start_addr=0x003f0000 num_areas=3 <7>wifi0: test Genesis mode with HCR 0x0f <7>prism2_pccard_cor_sreset: original COR 41 <7>prism2_pccard_genesis_sreset: original COR 41 <7>Readback test succeeded, HCR 0x0f <7>prism2_pccard_genesis_sreset: original COR 41 <7>prism2_hw_init: initialized in 0 ms <6>wifi0: NIC: id=0x8000 v0.0.1 <6>wifi0: PRI: id=0x15 v1.1.2 <7>Could not get RID for component STA <7>wifi0: Failed to read STA f/w version - only Primary f/w present <7>prism2_download: dl_cmd=6 start_addr=0x003f0000 num_areas=3 <7>wifi0: test Genesis mode with HCR 0x0f <7>prism2_pccard_cor_sreset: original COR 41 <7>prism2_pccard_genesis_sreset: original COR 41 <7>Readback test succeeded, HCR 0x0f <7>prism2_pccard_genesis_sreset: original COR 41 <7>prism2_hw_init: initialized in 20 ms <6>wifi0: NIC: id=0x801d v1.0.0 <6>wifi0: PRI: id=0x15 v1.1.2 <7>Could not get RID for component STA <7>wifi0: Failed to read STA f/w version - only Primary f/w present <7>prism2_download: dl_cmd=5 start_addr=0x003f0c01 num_areas=3 <7>prism2_hw_init: initialized in 40 ms <6>wifi0: NIC: id=0x801d v1.0.0 <6>wifi0: PRI: id=0x15 v1.1.2 <6>wifi0: STA: id=0x1f v1.8.4 <7>wlan0: manual reset request(1) <4>hostap_cs: wlan0: resetting card <7>prism2_pccard_cor_sreset: original COR 41 <7>hostap_cs: assuming no Primary image in flash - card initialization not completed <7>wlan0: persistent download of primary firmware <7>wifi0: test Genesis mode with HCR 0x0f <7>prism2_pccard_cor_sreset: original COR 41 <7>prism2_pccard_genesis_sreset: original COR 41 <7>Readback test succeeded, HCR 0x0f <7>prism2_pccard_genesis_sreset: original COR 41 <7>prism2_hw_init: initialized in 10 ms <6>wifi0: NIC: id=0x801d v1.0.0 <6>wifi0: PRI: id=0x15 v1.1.2 <7>Could not get RID for component STA <7>wifi0: Failed to read STA f/w version - only Primary f/w present <7>wlan0: persistent download of secondary firmware <7>prism2_hw_init: initialized in 30 ms <6>wifi0: NIC: id=0x801d v1.0.0 <6>wifi0: PRI: id=0x15 v1.1.2 <6>wifi0: STA: id=0x1f v1.8.4 <7>prism2: wlan0: operating mode changed 3 -> 2 <7>wifi0: TXEXC - status=0x0004 ([Discon]) tx_control=000c <7> retry_count=0 tx_rate=0 fc=0x4108 (Data::0 ToDS) <7> A1=44:44:44:44:44:44 A2=00:90:cc:c6:b8:44 A3=ff:ff:ff:ff:ff:ff A4=00:00:00:00:00:00 <7>wifi0: LinkStatus=1 (Connected) <7>wifi0: LinkStatus: BSSID=00:09:5b:ad:7c:6e >From ifconfig: wifi0 Link encap:UNSPEC HWaddr 00-90-CC-C6-B8-44-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:5916 (5.7 KiB) TX bytes:5610 (5.4 KiB) Interrupt:169 wlan0 Link encap:Ethernet HWaddr 00:90:CC:C6:B8:44 inet addr:192.168.0.7 Bcast:192.168.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:26 errors:0 dropped:0 overruns:0 frame:0 TX packets:13 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5448 (5.3 KiB) TX bytes:5610 (5.4 KiB) Interrupt:169 >From iwconfig: wifi0 IEEE 802.11b ESSID:"MYSSID" Nickname:"" Mode:Managed Frequency:2.462 GHz Access Point: 00:09:5B:AD:7C:6E Bit Rate:11 Mb/s Sensitivity=1/3 Retry short limit:8 RTS thr:off Fragment thr:off Encryption key:MYWEPHEXKEY Security mode:restricted Power Management:off wlan0 IEEE 802.11b ESSID:"MYSSID" Nickname:"" Mode:Managed Frequency:2.462 GHz Access Point: 00:09:5B:AD:7C:6E Bit Rate:11 Mb/s Sensitivity=1/3 Retry short limit:8 RTS thr:off Fragment thr:off Encryption key:MYWEPHEXKEY Security mode:restricted Power Management:off Link Quality=48/70 Signal level=-41 dBm Noise level=-90 dBm Rx invalid nwid:0 Rx invalid crypt:2 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:290 Missed beacon:0 My interfaces file: # Wireless interfaces iface wlan0 inet dhcp wireless_mode managed wireless_essid MYSSID wireless_key MYWEPHEXKEY [1] key [1] needs_reset yes needs_firware hostap_fw_load A ping to www.google.com gives: Host name lookup failure My resolv.conf: nameserver 192.168.0.1 Any idea why it does not work? Thanks, Bernard ____________________________________________________ Yahoo! Canada Toolbar: Search from anywhere on the web, and bookmark your favourite sites. Download it now at http://ca.toolbar.yahoo.com. _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
