Well, DUH! and double DUH! Just now restored both wince and the wince bootloader on my h2200 and it was so simple I can't believe it isn't in the website instructions somewhere. All I did was to take the two rescue images -- pocketpc.rescue and 2ndstage.rescue and dd them onto cf cards. Like:
dd if=2ndstage.rescue of=/dev/hde (this was on my laptop where the CF card in pcmcia adapter shows up as /devhde) and dd if=pocketpc.rescue 0f=/dev/hde This on two different cards, or the same one after using it first. Then, just put the CF card in the ipaq, connect the serial cable to a minicom terminal so you can see what's going on, then hit the Contacts, Power, and Reset buttons altogether to get into the rescue bootloader. The ipaq sees the CF card, reads it, and then the ipaq screen says "Press Power to Flash" so you do that and wait and it flashes it. I did the bootloader first, then the wince. The wince takes quite awhile, and then after it says "100%" it takes even more time for the checksum. But once the "SER" prompt comes back up on your serial console, the ipaq screen will say "Checksum Okay" and you just reset. -- Harmon Seaver _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
