I have a freshly installed NSLU2, with the base Angstrom image. (Little Endian).
I have loaded the various USB modules: [EMAIL PROTECTED]:~# lsmod Module Size Used by Not tainted uhci_hcd 22188 0 - Live 0xbf00f000 ehci_hcd 29036 0 - Live 0xbf006000 ohci_hcd 17476 0 - Live 0xbf000000 And my media appears to be recognised: usb 1-1: new full speed USB device using ohci_hcd and address 3 usb 1-1: configuration #1 chosen from 1 choice scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 3 usb-storage: waiting for device to settle before scanning scsi 1:0:0:0: Direct-Access CREATIVE NOMAD_MUVO 0001 PQ: 0 ANSI: 4 sd 1:0:0:0: [sda] 256001 512-byte hardware sectors (131 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 03 00 00 04 sd 1:0:0:0: [sda] Assuming drive cache: write through sd 1:0:0:0: [sda] 256001 512-byte hardware sectors (131 MB) sd 1:0:0:0: [sda] Write Protect is off sd 1:0:0:0: [sda] Mode Sense: 03 00 00 04 sd 1:0:0:0: [sda] Assuming drive cache: write through sda: sda1 sd 1:0:0:0: [sda] Attached SCSI removable disk usb-storage: device scan complete [EMAIL PROTECTED]:~# ls /dev | grep sd sda sda1 However I am unable to mount the media: [EMAIL PROTECTED]:~# mount /dev/sda1 /media/hdd/ mount: mounting /dev/sda1 on /media/hdd/ failed: No such device I have just tried fdisk'ing and re-formatting a partition (ext2) from the slug, and it seems to work fine. Is there something I am missing? _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
