On Wednesday 19 March 2008 09:43:10 Simon Loewen wrote: > Did someone find out how to identify a possible hardware conflict? > You need a special patch to the driver - the socket chip has a built in phy with a bug. I submitted this against the akita zaurus kernel, but should work on anything. Note I did not write the patch, just found it submitted to the pcmcia mailing list.
This is for the axnet_cs.ko module. Thanks, Tim > Simon Lowen wrote: > > Hi, > > > > John compiled the Socket CF 100/10 module as a ipkg for hx4700. Its > > works fine (on his 2200) and mine. the hx4700 can DHCP and I can ssh in. > > > > However, this is until during startup the system loads something else > > that causes a conflict somewhere and hangs the entire device. This > > happened either, during boot when the Angstrom compass screen is > > displayed at about 3/4 of the loading bar at the bottom, or whenever I > > insert the CF card after boot. > > > > Any ideas? > > > > Here is some info: > > Kernel 2.6.21-hh20 > > > > /var/log/messages: > > eth0: Asix AX88790 io: 0xc482330, irq 92, hw_addr 00:C0:18:xx:xx > > > > System Info tab: > > axcet.cs size 16684 > > use# 1 > > user by Live 0xbf112000 > > > > Regards, Simon. > > > > > > > > ------------------------------------------------------------------------ > > > > _______________________________________________ > > Angstrom-distro-users mailing list > > [email protected] > > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
_______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
