> >On Thu, Nov 20, 2008 at 10:46:26PM -0800, Patrick Kettner wrote: >> >> >> I looked all over the site as well as the nslu2 linux page, and there >> is no coherent explanation as to what may be going on. >> >> Thanks guys >> >> Patrick > > > I had all sorts of problems getting Angstrom working on my slug. > Did you find my sketchy little "how to" on the nslu2 site? > I think its linked on the left hand side of the main page. > (Sorry can't find the link atm.) > > Don't know if that is still current, but could be of some help. > > I'll try and check this list, but I don't really read it that regularly > anymore! > >
Yeah, I did, assuming you meant http://www.nslu2-linux.org/wiki/Angstrom/HomePage but it went from suggesting the image to use, to logging in and i'm stuck somewhere in between. I presume you log in over ssh, but the image doesn't seem to fully boot. I can't even ping it PING 192.168.1.77 (192.168.1.77) 56(84) bytes of data. >From 192.168.1.102 icmp_seq=1 Destination Host Unreachable I know that that is the proper ip, I check using arp -a for network connections. Did you have to modify the bin at all? All that I did was take Angstrom-base-image-glibc-ipk-2007.11RC3-ixp4xxbe-nslu2.bin from http://www.angstrom-distribution.org/unstable/images/ixp4xxbe/RC3/ as your entry suggests, and then sudo upslug2 -i Angstrom-base-image-glibc-ipk-2007.11RC3-ixp4xxbe-nslu2.bin and it flashes with full verification, and then the slug boots to a error amber light Thanks for any help you can give Patrick _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
