Hi,
I am trying to install Angstrom on my SIMpad SLC but get errors
during boot.
I installed the HH-Bootloader, transferred Angstrom-minimalist-gpe-
image-glibc-ipk-2007.12-r18-simpad.rootfs.jffs2 via serial Y-Modem to
the simpad ("load root") and tried to boot.
The kernel comes up but shows errors after "setting system
clock" (perhaps first write access?):
...
sa1100-rtc sa1100-rtc: rtc core: registered sa1100-rtc as rtc0
SA1100/PXA2xx Watchdog Timer: timer margin 60 sec
TCP cubic registered
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
sa1100-rtc sa1100-rtc: setting system clock to 1993-12-14 14:22:23
UTC (755878943)
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000000: 0x0c00 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000004: 0x746f instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000008: 0x6a2e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000000c: 0x3273 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000054: 0x72cc instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000005c: 0xcf54 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x00000060: 0xcf54 instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0000007c: 0x5726 instead
CLEANMARKER node found at 0x00000080, not first node in block
(0x00000000)
Node at 0x0001f61c with length 0x00000a5e would run over the end of
the erase block
Perhaps the file system was created with the wrong erase size?
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0001f620: 0x0a5e instead
jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at
0x0001f624: 0xc930 instead
Further such events for this erase block will not be printed
... lots more like this, then ...
Empty flash at 0x0058007c ends at 0x00580080
CLEANMARKER node found at 0x00580080, not first node in block
(0x00580000)
Node at 0x0059fb7c with length 0x
... and silence.
I tried this several times, with different images, the error is
always the same.
Any help would be greatly appreciated!
Regards,
Guido.
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
