It looks like the hx4700 can use WPA TKIP, but the driver currently
supplied won't support it.  I think this because of the documentation
previously meantioned.  Would someone please confirm whether this is the
case?

I have tried with these two difference interfaces because I cannot
rememver which is the right one although wlan0:ava gets better results.
 However, the responce is always,
WEXT auth param 0 value 0x2 - ioctl[SIOCSIWAUTH]: Operation not supported


wpa_supplicant -d -c/etc/wpa_supplicant.conf -iwlan0 -Dwext
wpa_supplicant -d -c/etc/wpa_supplicant.conf -iwlan0:ava -Dwext


Is there another list somebody would recommend that deals specifically
with this driver for the hx4700 on Angstrom?  Hopefully, the problem is
with my typing!

Cheers, S.

----------------------------------------------------------------------------
Some info from debug,

[EMAIL PROTECTED]:/etc$ wpa_supplicant -d -c/etc/wpa_supplicant.conf -iwlan0:ava
-Dwext
Initializing interface 'wlan0:ava' conf '/etc/wpa_supplicant.conf'
driver 'wext' ctrl_interface 'N/A' bridge 'N/A'
Configuration file '/etc/wpa_supplicant.conf' -> '/etc/wpa_supplicant.conf'
Reading configuration file '/etc/wpa_supplicant.conf'
ctrl_interface='/var/run/wpa_supplicant'
ctrl_interface_group='0' (DEPRECATED)
eapol_version=1
ap_scan=2
fast_reauth=1
Priority group 0
   id=0 ssid='denial'
Initializing interface (2) 'wlan0:ava'
EAPOL: SUPP_PAE entering state DISCONNECTED
EAPOL: KEY_RX entering state NO_KEY_RECEIVE
EAPOL: SUPP_BE entering state INITIALIZE
EAP: EAP entering state DISABLED
EAPOL: External notification - portEnabled=0
EAPOL: External notification - portValid=0
SIOCSIFFLAGS: Cannot assign requested address
Could not set interface 'wlan0:ava' UP
SIOCGIWRANGE: WE(compiled)=22 WE(source)=9 enc_capa=0x0
  capabilities: key_mgmt 0x0 enc 0x3
WEXT: Operstate: linkmode=1, operstate=5
Own MAC address: 00:11:85:c6:22:5d
wpa_driver_wext_set_wpa
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 7 value 0x1 - Driver does not support WPA.
wpa_driver_wext_set_key: alg=0 key_idx=0 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
wpa_driver_wext_set_key: alg=0 key_idx=1 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
wpa_driver_wext_set_key: alg=0 key_idx=2 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
wpa_driver_wext_set_key: alg=0 key_idx=3 set_tx=0 seq_len=0 key_len=0
ioctl[SIOCSIWENCODEEXT]: Operation not supported
Driver did not support SIOCSIWENCODEEXT, trying SIOCSIWENCODE
wpa_driver_wext_set_countermeasures
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 4 value 0x0 - wpa_driver_wext_set_drop_unencrypted
ioctl[SIOCSIWAUTH]: Operation not supported
WEXT auth param 5 value 0x1 - Setting scan request: 0 sec 100000 usec
Using existing control interface directory.
ctrl_interface_group=0
Added interface wlan0:ava
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b06 len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b2a len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b2a len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b2a len=8
RTM_NEWLINK: operstate=0 ifi_flags=0x1002 ()
Wireless event: cmd=0x8b2a len=8
l2_packet_receive - recvfrom: Network is down

_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users

Reply via email to