I downloaded two systems for the beagleboard built by narcissus: a
stable and an unstable task base extended build. Both are split images
of a rootfs tar file and a 1GB sd card image.
I copied the sd card image to an 2GB sd ram card (using dd) and then
un-tarred the compressed root file system into the mounted ext3 partition.
The system hangs in u-boot with the following output:
----
U-Boot 2010.03-rc1 (Mar 25 2010 -
20:42:17)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max
clock-720Mhz
OMAP3 Beagle board +
LPDDR/NAND
I2C: ready
-----
If I replace the u-boot.bin on the VFAT partition with a u-boot.bin from
beagleboard site (u-boot-revc4.bin), the boot succeeds.
Anyone know why the u-boot.bin on the provided .img file from narcissus
won't boot on the beagleboard?
My beagleboard is a rev C4. I have nothing connected to the board, but
power and the serial console.
Gregg
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
