What do you mean by hw-reset? Is it performed by some guy or you manage some power switch?
2010/6/19 Chris <[email protected]> > Hi Max, > > Thanks for the info! > > So should I put that code after every write? > Obviously I am not sure when the reset will occur - so that will provide > most protection? > > Cheers, > CJ > > > > Chris, >> >> what if you perform syncing before hard reset? >> >> insert in your code: >> >> sync(); >> hw_reset(); >> >> regards, >> Max >> >> 2010/6/18 Chris<[email protected]> >> >> >> >>> Hi, >>> >>> I have an application where there will be many hard resets often. >>> I am using EXT3 as my file system - and there are problems with system >>> integrity because of the resets. >>> >>> When I was using an x86 board I worked with a debian based distro that >>> allowed me to boot and run the OS from ram. >>> This was a good solution as the media was never mounted. >>> >>> Has anyone done this with Angstrom? >>> Any other ideas to solve this problem? >>> >>> Cheers, >>> CJ >>> >>> _______________________________________________ >>> Angstrom-distro-users mailing list >>> [email protected] >>> http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users >>> >>> >>> >> > > _______________________________________________ > Angstrom-distro-users mailing list > [email protected] > http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users > _______________________________________________ Angstrom-distro-users mailing list [email protected] http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
