Hello,
I tried to run the demos from
http://www.angstrom-distribution.org/demo/beagleboard/archive/
on my beagleboard C4 and found out, that both images from january 2009
didn't boot. Both use kernel 2.6.27. What's wrong with this kernel
version? All other demos ran well, older and newer ones.
I have X-Loader 1.4.4ss (Jul 24 2010 - 12:54:25) and angstrom-distro's
MLO from 28-Jul-2010 17:03 in NAND.
Is this a known problem?
Did they ever run on Beagleboard C4? Do they on xM?
Is there a way to get 2.6.27 kernels running? (The only version
including OpenVZ patches)
Pars pro toto the output of failed demo
Angstrom-Beagleboard-demo-image-glibc-ipk-2009.X-test-20090104-beagleboard.rootfs.tar.bz2
Texas Instruments X-Loader 1.4.4ss (Jul 24 2010 - 12:54:25)
Beagle Rev C4
Reading boot sector
Loading u-boot.bin from nand
U-Boot 2010.03 (Jul 24 2010 - 13:35:32)
OMAP3530-GP ES3.1, CPU-OPP2, L3-165MHz, Max clock-720Mhz
OMAP3 Beagle board + LPDDR/NAND
I2C: ready
DRAM: 256 MB
NAND: 256 MiB
*** Warning - bad CRC or NAND, using default environment
In: serial
Out: serial
Err: serial
Probing for expansion boards, if none are connected you'll see a
harmless I2C error.
timed out in wait_for_pin: I2C_STAT=0
I2C read: I/O error
Unrecognized expansion board: 0
Beagle Rev C4
Die ID #14be0004000000000403730515001015
Hit any key to stop autoboot: 0
mmc1 is available
The user button is currently NOT pressed.
reading boot.scr
** Unable to read "boot.scr" from mmc 1:1 **
reading uImage
2230884 bytes read
Booting from mmc ...
## Booting kernel from Legacy Image at 80200000 ...
Image Name: Angstrom/2.6.27/beagleboard
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2230820 Bytes = 2.1 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
Loading Kernel Image ... OK
OK
Starting kernel ...
Uncompressing
Linux................................................................................................................................................
done, booting the kernel.
<Hanging Here>
I stumbled upon this issue as my own bitbaked 2.6.27-kernel hung at the
same place.
--
kind regards
rainer herrendoerfer
_______________________________________________
Angstrom-distro-users mailing list
[email protected]
http://lists.linuxtogo.org/cgi-bin/mailman/listinfo/angstrom-distro-users
