Greetings, For my first time use of Ansible, I have attempted to run a playbook, which installs OpenStack to a local computer. My target computer has a fresh Fedora 20 install, is all up to date, and has an IP of 10.0.0.32 The computer, from which I ran this playbook is a Ubuntu 14 VM, and has an IP of 10.0.0.50. A regular command line ssh from Ubunti to Fedora works fine. my hosts file contents:
[noclab] 10.0.0.32 [gluster_loopback] 10.0.0.32 [gluster_master] 10.0.0.32 [gluster_nodes] 10.0.0.32 [openstack_controller] 10.0.0.32 [openstack_keystone] 10.0.0.32 [openstack_glance] 10.0.0.32 [openstack_cinder] 10.0.0.32 [openstack_neutron] 10.0.0.32 [openstack_neutron_l3] 10.0.0.32 [openstack_neutron_dhcp] 10.0.0.32 [openstack_neutron_meta] 10.0.0.32 [openstack_horizon] 10.0.0.32 [openstack_heat] 10.0.0.32 [openstack_trove] 10.0.0.32 [openstack_compute] 10.0.0.32 [swift_proxy_nodes] 10.0.0.32 [swift_storage_nodes] 10.0.0.32 [nfs_nodes] 10.0.0.32 My site.yml file contents: --- # The main openstack site deployment playbook - hosts: all roles: - huit-accessible - common - networking-setup - pre-tweaks - hosts: gluster_nodes roles: [gluster] - hosts: gluster_master roles: [gluster-master] - hosts: openstack_compute roles: [gluster-client] #- hosts: swift_storage_nodes # roles: [gluster-client] - hosts: openstack_controller roles: - packstack # # This is a temp hack unti upstream code is fixed. # - hosts: [openstack_compute, openstack_controller, openstack_neutron_l3] roles: [ vxlan-fix ] - hosts: openstack_neutron_l3 roles: - network-extras - hosts: openstack_neutron roles: - network-server-extras - hosts: openstack_horizon roles: - network-extras-gui - hosts: openstack_controller roles: # - trove # - sahara - hosts: openstack_controller roles: - post-config # - testing The command I used on Ubuntu: ansible-playbook -s -u root -i hosts site.yml -vvvv Here is the output: [WARNING]: It is unneccessary to use '{{' in loops, leave variables in loop expressions bare. PLAY [all] ******************************************************************** GATHERING FACTS *************************************************************** <10.0.0.32> ESTABLISH CONNECTION FOR USER: root <10.0.0.32> REMOTE_MODULE setup <10.0.0.32> EXEC ['ssh', '-C', '-tt', '-vvv', '-o', 'ControlMaster=auto', '-o', 'ControlPersist=60s', '-o', 'ControlPath=/home/eugene/.ansible/cp/ansible-ssh-%h-%p-%r', '-o', 'Port=22', '-o', 'KbdInteractiveAuthentication=no', '-o', 'PreferredAuthentications=gssapi-with-mic,gssapi-keyex,hostbased,publickey', '-o', 'PasswordAuthentication=no', '-o', 'User=root', '-o', 'ConnectTimeout=10', '10.0.0.32', "/bin/sh -c 'mkdir -p $HOME/.ansible/tmp/ansible-tmp-1418688194.6-211856873814937 && echo $HOME/.ansible/tmp/ansible-tmp-1418688194.6-211856873814937'"] fatal: [10.0.0.32] => SSH encountered an unknown error. The output was: OpenSSH_6.6.1, OpenSSL 1.0.1f 6 Jan 2014 debug1: Reading configuration data /etc/ssh/ssh_config debug1: /etc/ssh/ssh_config line 19: Applying options for * debug1: auto-mux: Trying existing master debug1: Control socket "/home/eugene/.ansible/cp/ansible-ssh-10.0.0.32-22-root" does not exist debug2: ssh_connect: needpriv 0 debug1: Connecting to 10.0.0.32 [10.0.0.32] port 22. debug2: fd 3 setting O_NONBLOCK debug1: fd 3 clearing O_NONBLOCK debug1: Connection established. debug3: timeout: 9999 ms remain after connect debug1: identity file /home/eugene/.ssh/id_rsa type -1 debug1: identity file /home/eugene/.ssh/id_rsa-cert type -1 debug1: identity file /home/eugene/.ssh/id_dsa type -1 debug1: identity file /home/eugene/.ssh/id_dsa-cert type -1 debug1: identity file /home/eugene/.ssh/id_ecdsa type -1 debug1: identity file /home/eugene/.ssh/id_ecdsa-cert type -1 debug1: identity file /home/eugene/.ssh/id_ed25519 type -1 debug1: identity file /home/eugene/.ssh/id_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_6.6.1p1 Ubuntu-2ubuntu2 debug1: Remote protocol version 2.0, remote software version OpenSSH_6.4 debug1: match: OpenSSH_6.4 pat OpenSSH* compat 0x04000000 debug2: fd 3 setting O_NONBLOCK debug3: load_hostkeys: loading entries for host "10.0.0.32" from file "/home/eugene/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/eugene/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug3: order_hostkeyalgs: prefer hostkeyalgs: ecdsa-sha2-nistp256-cert-...@openssh.com,ecdsa-sha2-nistp384-cert-...@openssh.com,ecdsa-sha2-nistp521-cert-...@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug2: kex_parse_kexinit: curve25519-sha...@libssh.org,ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ecdsa-sha2-nistp256-cert-...@openssh.com,ecdsa-sha2-nistp384-cert-...@openssh.com,ecdsa-sha2-nistp521-cert-...@openssh.com,ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519-cert-...@openssh.com,ssh-rsa-cert-...@openssh.com,ssh-dss-cert-...@openssh.com,ssh-rsa-cert-...@openssh.com,ssh-dss-cert-...@openssh.com,ssh-ed25519,ssh-rsa,ssh-dss debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-...@openssh.com,aes256-...@openssh.com,chacha20-poly1...@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-...@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-...@openssh.com,aes256-...@openssh.com,chacha20-poly1...@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-...@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-...@openssh.com,hmac-sha1-...@openssh.com,umac-64-...@openssh.com,umac-128-...@openssh.com,hmac-sha2-256-...@openssh.com,hmac-sha2-512-...@openssh.com,hmac-ripemd160-...@openssh.com,hmac-sha1-96-...@openssh.com,hmac-md5-96-...@openssh.com,hmac-md5,hmac-sha1,umac...@openssh.com,umac-...@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd...@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-...@openssh.com,hmac-sha1-...@openssh.com,umac-64-...@openssh.com,umac-128-...@openssh.com,hmac-sha2-256-...@openssh.com,hmac-sha2-512-...@openssh.com,hmac-ripemd160-...@openssh.com,hmac-sha1-96-...@openssh.com,hmac-md5-96-...@openssh.com,hmac-md5,hmac-sha1,umac...@openssh.com,umac-...@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd...@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: z...@openssh.com,zlib,none debug2: kex_parse_kexinit: z...@openssh.com,zlib,none debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: kex_parse_kexinit: ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha1,diffie-hellman-group1-sha1 debug2: kex_parse_kexinit: ssh-rsa,ecdsa-sha2-nistp256 debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-...@openssh.com,aes256-...@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-...@lysator.liu.se debug2: kex_parse_kexinit: aes128-ctr,aes192-ctr,aes256-ctr,arcfour256,arcfour128,aes128-...@openssh.com,aes256-...@openssh.com,aes128-cbc,3des-cbc,blowfish-cbc,cast128-cbc,aes192-cbc,aes256-cbc,arcfour,rijndael-...@lysator.liu.se debug2: kex_parse_kexinit: hmac-md5-...@openssh.com,hmac-sha1-...@openssh.com,umac-64-...@openssh.com,umac-128-...@openssh.com,hmac-sha2-256-...@openssh.com,hmac-sha2-512-...@openssh.com,hmac-ripemd160-...@openssh.com,hmac-sha1-96-...@openssh.com,hmac-md5-96-...@openssh.com,hmac-md5,hmac-sha1,umac...@openssh.com,umac-...@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd...@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: hmac-md5-...@openssh.com,hmac-sha1-...@openssh.com,umac-64-...@openssh.com,umac-128-...@openssh.com,hmac-sha2-256-...@openssh.com,hmac-sha2-512-...@openssh.com,hmac-ripemd160-...@openssh.com,hmac-sha1-96-...@openssh.com,hmac-md5-96-...@openssh.com,hmac-md5,hmac-sha1,umac...@openssh.com,umac-...@openssh.com,hmac-sha2-256,hmac-sha2-512,hmac-ripemd160,hmac-ripemd...@openssh.com,hmac-sha1-96,hmac-md5-96 debug2: kex_parse_kexinit: none,z...@openssh.com debug2: kex_parse_kexinit: none,z...@openssh.com debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: debug2: kex_parse_kexinit: first_kex_follows 0 debug2: kex_parse_kexinit: reserved 0 debug2: mac_setup: setup hmac-md5-...@openssh.com debug1: kex: server->client aes128-ctr hmac-md5-...@openssh.com z...@openssh.com debug2: mac_setup: setup hmac-md5-...@openssh.com debug1: kex: client->server aes128-ctr hmac-md5-...@openssh.com z...@openssh.com debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA d2:dc:ac:79:f4:51:86:b6:27:5c:9f:07:20:d9:c3:6f debug3: load_hostkeys: loading entries for host "10.0.0.32" from file "/home/eugene/.ssh/known_hosts" debug3: load_hostkeys: found key type ECDSA in file /home/eugene/.ssh/known_hosts:1 debug3: load_hostkeys: loaded 1 keys debug1: Host '10.0.0.32' is known and matches the ECDSA host key. debug1: Found key in /home/eugene/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug2: kex_derive_keys debug2: set_newkeys: mode 1 debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug2: set_newkeys: mode 0 debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug2: service_accept: ssh-userauth debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /home/eugene/.ssh/id_rsa ((nil)), debug2: key: /home/eugene/.ssh/id_dsa ((nil)), debug2: key: /home/eugene/.ssh/id_ecdsa ((nil)), debug2: key: /home/eugene/.ssh/id_ed25519 ((nil)), debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug3: start over, passed a different list publickey,gssapi-keyex,gssapi-with-mic,password debug3: preferred gssapi-with-mic,gssapi-keyex,hostbased,publickey debug3: authmethod_lookup gssapi-with-mic debug3: remaining preferred: gssapi-keyex,hostbased,publickey debug3: authmethod_is_enabled gssapi-with-mic debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information No Kerberos credentials available debug1: Unspecified GSS failure. Minor code may provide more information No Kerberos credentials available debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information No Kerberos credentials available debug2: we did not send a packet, disable method debug3: authmethod_lookup gssapi-keyex debug3: remaining preferred: hostbased,publickey debug3: authmethod_is_enabled gssapi-keyex debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug2: we did not send a packet, disable method debug3: authmethod_lookup publickey debug3: remaining preferred: ,publickey debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /home/eugene/.ssh/id_rsa debug3: no such identity: /home/eugene/.ssh/id_rsa: No such file or directory debug1: Trying private key: /home/eugene/.ssh/id_dsa debug3: no such identity: /home/eugene/.ssh/id_dsa: No such file or directory debug1: Trying private key: /home/eugene/.ssh/id_ecdsa debug3: no such identity: /home/eugene/.ssh/id_ecdsa: No such file or directory debug1: Trying private key: /home/eugene/.ssh/id_ed25519 debug3: no such identity: /home/eugene/.ssh/id_ed25519: No such file or directory debug2: we did not send a packet, disable method debug1: No more authentication methods to try. Permission denied (publickey,gssapi-keyex,gssapi-with-mic,password). TASK: [huit-accessible | install libselinux-python] *************************** FATAL: no hosts matched or all hosts have already failed -- aborting PLAY RECAP ******************************************************************** to retry, use: --limit @/home/eugene/site.retry 10.0.0.32 : ok=0 changed=0 unreachable=1 failed=0 What can I do to fix this? -Eugene -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to ansible-project+unsubscr...@googlegroups.com. To post to this group, send email to ansible-project@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/8cc88442-9848-45da-b779-f75c5691fe02%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.