I'd recommend looking at having your role or playbook drop in a sensible, templated configuration personally.
Baking a static file into an ISO will almost certainly cause future pain unless you only ever deploy one hardware and storage combination with absolutely zero variation? On Mon, 23 Oct 2023 at 14:46, Prady A <pradyumna....@gmail.com> wrote: > Thank you so much for your kind reply. > > For temporary fix I copied the /etc/multipath.conf from other machine but > eventually we need to update our ISO image to include this file. > > Regards > PD > > > On Wed, Oct 18, 2023 at 18:11, Will McDonald <wmcdon...@gmail.com> wrote: > >> This seems like a pretty glaring error: >> >> >>> ConditionPathExists=/etc/multipath.conf was not met >> >> >> This is likely nothing to do with Ansible. You're installing a multipath >> package, enabling a service, the service is failing to start automatically >> because it doesn't have any valid config. You should see the same problem >> if you perform the same steps manually. Figure out your manual process >> first, then automate it. >> >> Either: >> >> 1. Include a templated /etc/multipath.conf config before >> enabling/starting the systemd service >> 2. Run something like mpathconf --enable to create a default config >> 3. Override/replace the Condition in the systemd unit file (probably a >> bad idea). >> >> >> >> On Wed, 18 Oct 2023 at 07:25, Prady A <pradyumna....@gmail.com> wrote: >> >>> Thank you . Due to some old iso image the multipath is not able to >>> enable . We have to update the iso image it seems >>> >>> Thank you >>> >>> On Wed, Oct 18, 2023 at 14:08, dulhaver via Ansible Project < >>> ansible-project@googlegroups.com> wrote: >>> >>>> hi, >>>> >>>> the syntax of your TASK sems not to match the docs for the service >>>> module >>>> <https://docs.ansible.com/ansible/latest/collections/ansible/builtin/service_module.html#ansible-collections-ansible-builtin-service-module>. >>>> Would something like ... >>>> >>>> >>>> - name: Enable service httpd, and not touch the state >>>> ansible.builtin.service: >>>> name: multipathd >>>> state: started >>>> enabled: true >>>> >>>> ... work? >>>> >>>> On 10/18/2023 5:33 AM CEST Prady A <pradyumna....@gmail.com> wrote: >>>> >>>> >>>> Hi All.. >>>> >>>> I ve a very 2 very basic task of enabling multipath. >>>> The 2 task is failing since the first one is not enabling. But in >>>> ansible job it is showing as changed but when I checked multipath service >>>> in system it is showing as Below: >>>> >>>> Active: inactive(dead) >>>> Condition: start condition failed >>>> |- ConditionPathExists=/etc/multipath.conf was not >>>> met >>>> >>>> *Tasks* >>>> ———- >>>> - name: confirm multipathd is enabled >>>> service: multipathd >>>> state: started >>>> enable: yes >>>> >>>> - name: check default polling interval >>>> shell: multipathd list config | awk ‘/defaults {/,/}’|grep -w >>>> polling_interval >>>> register: polling_interval >>>> changed_when: false >>>> >>>> Please suggest why ansible not able to enable multipath service >>>> correctly.. >>>> >>>> Regards >>>> >>>> >>>> -- >>>> You received this message because you are subscribed to the Google >>>> Groups "Ansible Project" group. >>>> To unsubscribe from this group and stop receiving emails from it, send >>>> an email to ansible-project+unsubscr...@googlegroups.com. >>>> To view this discussion on the web visit >>>> https://groups.google.com/d/msgid/ansible-project/1998953809.39642.1697605729025%40office.mailbox.org >>>> <https://groups.google.com/d/msgid/ansible-project/1998953809.39642.1697605729025%40office.mailbox.org?utm_medium=email&utm_source=footer> >>>> . >>>> >>> -- >>> You received this message because you are subscribed to the Google >>> Groups "Ansible Project" group. >>> To unsubscribe from this group and stop receiving emails from it, send >>> an email to ansible-project+unsubscr...@googlegroups.com. >>> >> To view this discussion on the web visit >>> https://groups.google.com/d/msgid/ansible-project/CAEuB3Aq7dH0AB%3DMrPXBZ%3DtMbTT-uY4tfE6BMPpQEkiVMKUhXOg%40mail.gmail.com >>> <https://groups.google.com/d/msgid/ansible-project/CAEuB3Aq7dH0AB%3DMrPXBZ%3DtMbTT-uY4tfE6BMPpQEkiVMKUhXOg%40mail.gmail.com?utm_medium=email&utm_source=footer> >>> . >>> >> -- >> You received this message because you are subscribed to the Google Groups >> "Ansible Project" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to ansible-project+unsubscr...@googlegroups.com. >> To view this discussion on the web visit >> https://groups.google.com/d/msgid/ansible-project/CAKtKohQsrvv0O5eXWFyVWU%2B84T6SFukHoOQ8Fr4UMj50gokiCw%40mail.gmail.com >> <https://groups.google.com/d/msgid/ansible-project/CAKtKohQsrvv0O5eXWFyVWU%2B84T6SFukHoOQ8Fr4UMj50gokiCw%40mail.gmail.com?utm_medium=email&utm_source=footer> >> . >> > -- > You received this message because you are subscribed to the Google Groups > "Ansible Project" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to ansible-project+unsubscr...@googlegroups.com. > To view this discussion on the web visit > https://groups.google.com/d/msgid/ansible-project/CAEuB3ApbBantMgeDiBS%3DB-UG989yRxmeZtWGZuHjjcf5tYDMxA%40mail.gmail.com > <https://groups.google.com/d/msgid/ansible-project/CAEuB3ApbBantMgeDiBS%3DB-UG989yRxmeZtWGZuHjjcf5tYDMxA%40mail.gmail.com?utm_medium=email&utm_source=footer> > . > -- You received this message because you are subscribed to the Google Groups "Ansible Project" group. To unsubscribe from this group and stop receiving emails from it, send an email to ansible-project+unsubscr...@googlegroups.com. To view this discussion on the web visit https://groups.google.com/d/msgid/ansible-project/CAKtKohQ9MpPWjYQSQ%3DdJGmVKBUsPz8%3DTR5pgZf2TstvB1_VNtg%40mail.gmail.com.
