With some help from Coraid I was able to build and install the newest aoe driver (version 62, Ubuntu 8.04 ships with version 32).
I have copied some Gigs to/from the vblade and all seems to be fine. Sorry for the noise. Mark On 13.06.2008, at 15:52, Mark wrote: > Hi all, > > when copying files to an vblade backed drive I'm getting the error > above. Whenever this happens vblade simply quits. > > Here's my setup: > Ubuntu 8.04 > vblade-17 built using make > > I'm telling vblade to export a second hard disk, sdb, 100GB on the > loopback interface lo. I did make sure sdb is not already mounted on > the system before exporting it with vblade. > sudo vblade 9 1 lo /dev/sdb > > on the same machine, on a second terminal window I am then mounting > the vblade partition > sudo modprobe aoe > sudo aoe-stat (shows e9.1 is up) > sudo mkdir /media/vblade-mount > sudo mount /dev/etherd/e9.1p1 /media/vblade-mount > > Up here all goes well, the mount appears on my desktop and I can use > the drive. At some point the error occurs (usually after copying > between 100MB or 500MB data). > > Any ideas? > > I am using the built in aoe driver (since I could not get the latest > Coraid driver to build). sudo aoe-version shows me the aoe driver > has version 32. Is that the cause? > > Best regards > Mark ------------------------------------------------------------------------- Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://sourceforge.net/services/buy/index.php _______________________________________________ Aoetools-discuss mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/aoetools-discuss
