Hi Firas,
As far as I know GNU radio isn't related with GNUstep. So we can't
help you in this way. Is better if write to the mailing list of GNU
radio. Regards.
On 2013-05-10 23:20:48 -0600 Firas Serrge <[email protected]>
wrote:
hello ,
i am new in usrp and GNU radio ,...
i have usrp n210 and wbx (50-2200 Mhz) daughter board ,
i have installed GRC on Ubuntu 12.04 LTS ,
i wrote the .GRC file and generate the python code ...
when i use my hardware to transmit a signals using ( usrp sink ) ....
there
are interface and a signal will appears and no problems...
but when i 'm trying to receive signals (FM signals for example )
,... , in
the usrp n210 motherboard .. the led C ( receiving) is on , but in the
graphical interface .. no signal appear ...
also i used the command ( " iptraf " ) to view if there are a traffic
on
the interface eth0 ,
there are traffic but the software dosen't comprehend the receiving
Data ,
// UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on
eth0
// UDP (52 bytes) from 192.168.10.20:49157 to 192.168.10.1:47842 on
eth0
please help me .. i don't know why no signal appears in GUI ....
how may i receive signal ? and is there another method to receive
signal?
thanks you lot .
_______________________________________________
apps-gnustep mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/apps-gnustep
_______________________________________________
apps-gnustep mailing list
[email protected]
https://lists.gnu.org/mailman/listinfo/apps-gnustep
