Good advise Glenn... I just leaned back... and YES! Perhaps Bart should try the same thing :-)
Regards, Bastiaan BTW: I have no idea how your trick works, but it does! On Sat, 12 Jul 2003 16:45:07 -0400, Glenn McCorkle wrote: > On Sat, 12 Jul 2003 15:08:29 +00, Bastiaan Edelman, PA3FFZ wrote: >> On Fri, 11 Jul 2003 21:05:30 -0400, Glenn McCorkle wrote: >>> Please describe some further details of what *does* happen when >>> the unsuccessful attempt to connect is made. >>> Have you tried PAP/CHAP login ? >>> (no login script, no terminal login, username and password stored >>> at the bottom of the [dialer] section in arachne.cfg) >>> [dialer] >>> DialPage file:pppglenn.htm >>> Dialer @MINITERM.EXE>PPP.LOG >>> TerminalWindow @MINITERM.EXE >>> UseTerminal No >>> Port 1 >>> Irq 4 >>> Base 0x3e8 >>> Mode 8N1 >>> Speed 115200 >>> InitString AT&fs7=90s11=50 >>> DialString ATDT >>> PhoneNumber the_correct_dial-up_number >>> Autologin No >>> WaitFor1 >>> Response1 >>> WaitFor2 >>> Response2 >>> WaitFor3 >>> Response3 >>> PPPusername correct_username (might need something like [EMAIL PROTECTED]) >>> PPPpassword correct_password (passwords are CaseSensitive) >> *********************************************************************** >> Hallo Glenn, >> this is the last dialer page that actually worked OK. >> I tried several for "wait for" but not even a ":" did the job. >> If you don't now what the server is asking... >> It all end with "NO CARRIER" >> [dialer] >> DialPage file:pppglenn.htm >> Dialer @MINITERM.EXE>PPP.LOG >> TerminalWindow @MINITERM.EXE >> UseTerminal Yes >> Port 2 >> Irq 3 >> Base Default >> Mode 8N1 >> Speed 38400 >> InitString ATZ >> DialString ATDT >> PhoneNumber 0w0676034583 >> Autologin Yes >> WaitFor1 ogin: >> Response1 /u >> WaitFor2 ssword: >> Response2 /p >> ;WaitFor3 >> ;Response3 - >> ;WaitFor4 - >> ;Response4 - >> PPPusername [EMAIL PROTECTED] >> PPPpassword ************ (I starred out their password) > Please try as requested above...... > Have you tried PAP/CHAP login ? > (no login script, no terminal login, username and password stored > at the bottom of the [dialer] section in arachne.cfg) > To try PAP/CHAP.... simply change these 2 settings. > (can be done on the dialer page 'ppp_init.htm' or 'pppglenn.htm') > Since you *are* using pppglenn.htm: > Notice what I placed there ? ;-) > "show terminal (diagnostic mode)" > "login script (most times not needed)" > So...... > Uncheck the box for 'show terminal', uncheck the box for 'login script', > hit the 'save changes' button, hit the 'dial now' button. > Sit-back and wait. ;-) > -- > Glenn > http://arachne.cz/ > http://www.delorie.com/listserv/mime/ > http://www.cisnet.com/glennmcc/ > http://www.cisnet.com/glennmcc/aqc/ ************************* Technische Redactie CQ-PA Bastiaan Edelman, PA3FFZ ************************* Attentie: e-mail adres bij Wanadoo niet meer gebruiken! [EMAIL PROTECTED] [EMAIL PROTECTED] [EMAIL PROTECTED] http://home.hetnet.nl/~ba8tian/index.html -- Virusvrij e-mailen? => Arachne browser/mailer -- This mail was written by user of Arachne, the Ultimate Internet Client
