hi , thanks for your help and I did as you write :creating a job with the
following JSON:
and got filed job run state....
{
"id": "pokec-import",
"run": {
"cmd": "/import.sh tcp://10.2.0.141:1026 <http://10.0.2.11:1026/>",
"cpus": 1,
"mem": 128,
"disk": 0,
"docker": {
"image": "arangodb/pokec-import"
}
}
}
here is my endpoint pic:
<https://lh3.googleusercontent.com/-FjUkea8Kizk/WKXGzQFsN2I/AAAAAAAACmU/F9XILjCAwLINMnAZxLt7Efe5amMCpF9cgCLcB/s1600/Selection_009.png>
Is there any thing wrong with my job json??
在 2017年2月16日星期四 UTC+8下午11:00:06，[email protected]写道：
>
> Hi,
>
> these are the internal IP addresses of the coordinators. To do an import I
> would recommend deploying a job to DC/OS.
>
> Here is an example we are using internally:
>
> https://github.com/arangodb-helper/pokec-import
> https://hub.docker.com/r/arangodb/pokec-import/
>
> You can deploy it via the Jobs tab in DC/OS by creating a job with the
> following JSON:
>
> {
> "id": "pokec-import",
> "run": {
> "cmd": "/import.sh tcp://10.0.2.11:1026",
> "cpus": 1,
> "mem": 128,
> "disk": 0,
> "docker": {
> "image": "arangodb/pokec-import"
> }
> }
> }
>
> Please adjust the endpoint in the cmd to your needs :)
>
> This is more or less the quick and dirty way because we are hardcoding the
> coordinator. We have created a small tutorial on how we would build a fully
> resilient application on DC/OS using ArangoDB as its backend:
>
> https://docs.arangodb.com/3.1/cookbook/Cloud/DcosFullExample.html
>
> In this setup you would use
>
> tcp://arangodb-proxy.marathon.mesos:8529
>
> as the endpoint and not have to care about a specific arangodb endpoint.e
>
> Hope that helps!
>
> Kind regards,
>
> Andreas Streichardt
>
> Am Donnerstag, 16. Februar 2017 15:55:37 UTC+1 schrieb Feng Wang:
>>
>> Hello community,
>> I have install ArangoDB3 in DC/OS , and the STATE is 'Healthy' . I
>> open the service and the panel like this:
>>
>>
>>
>> <https://lh3.googleusercontent.com/-tGfjLVFnGrw/WKW9LuWV_CI/AAAAAAAACmE/bMzQDbI82noLy2gwPVUb4mQbWm70SBmbACLcB/s1600/Selection_008.png>
>>
>>
>> I also run 'docker ps' on both two Endpoints,and see some images are
>> running such as :
>> arangodb/arangodb-mesos:3.1....master.mesos:5000/arangodb/arangodb-mesos-framework:3.1-build1
>>
>> I want to know :
>> 1. how can I use arangoimp to import data
>> 2. which docker image process should I attach.
>>
>> thx
>>
>
--
You received this message because you are subscribed to the Google Groups
"ArangoDB" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to [email protected].
For more options, visit https://groups.google.com/d/optout.
