Date: Wednesday, November 9, 2016 @ 17:52:39 Author: dreisner Revision: 280261
archrelease: copy trunk to testing-i686, testing-x86_64 Added: systemd/repos/testing-i686/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (from rev 280260, systemd/trunk/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch) systemd/repos/testing-i686/0001-disable-RestrictAddressFamilies-on-i686.patch (from rev 280260, systemd/trunk/0001-disable-RestrictAddressFamilies-on-i686.patch) systemd/repos/testing-i686/PKGBUILD (from rev 280260, systemd/trunk/PKGBUILD) systemd/repos/testing-i686/arch.conf (from rev 280260, systemd/trunk/arch.conf) systemd/repos/testing-i686/initcpio-hook-udev (from rev 280260, systemd/trunk/initcpio-hook-udev) systemd/repos/testing-i686/initcpio-install-systemd (from rev 280260, systemd/trunk/initcpio-install-systemd) systemd/repos/testing-i686/initcpio-install-udev (from rev 280260, systemd/trunk/initcpio-install-udev) systemd/repos/testing-i686/loader.conf (from rev 280260, systemd/trunk/loader.conf) systemd/repos/testing-i686/splash-arch.bmp (from rev 280260, systemd/trunk/splash-arch.bmp) systemd/repos/testing-i686/systemd.install (from rev 280260, systemd/trunk/systemd.install) systemd/repos/testing-i686/udev-hwdb.hook (from rev 280260, systemd/trunk/udev-hwdb.hook) systemd/repos/testing-x86_64/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (from rev 280260, systemd/trunk/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch) systemd/repos/testing-x86_64/0001-disable-RestrictAddressFamilies-on-i686.patch (from rev 280260, systemd/trunk/0001-disable-RestrictAddressFamilies-on-i686.patch) systemd/repos/testing-x86_64/PKGBUILD (from rev 280260, systemd/trunk/PKGBUILD) systemd/repos/testing-x86_64/arch.conf (from rev 280260, systemd/trunk/arch.conf) systemd/repos/testing-x86_64/initcpio-hook-udev (from rev 280260, systemd/trunk/initcpio-hook-udev) systemd/repos/testing-x86_64/initcpio-install-systemd (from rev 280260, systemd/trunk/initcpio-install-systemd) systemd/repos/testing-x86_64/initcpio-install-udev (from rev 280260, systemd/trunk/initcpio-install-udev) systemd/repos/testing-x86_64/loader.conf (from rev 280260, systemd/trunk/loader.conf) systemd/repos/testing-x86_64/splash-arch.bmp (from rev 280260, systemd/trunk/splash-arch.bmp) systemd/repos/testing-x86_64/systemd.install (from rev 280260, systemd/trunk/systemd.install) systemd/repos/testing-x86_64/udev-hwdb.hook (from rev 280260, systemd/trunk/udev-hwdb.hook) Deleted: systemd/repos/testing-i686/PKGBUILD systemd/repos/testing-i686/arch.conf systemd/repos/testing-i686/initcpio-hook-udev systemd/repos/testing-i686/initcpio-install-systemd systemd/repos/testing-i686/initcpio-install-udev systemd/repos/testing-i686/loader.conf systemd/repos/testing-i686/splash-arch.bmp systemd/repos/testing-i686/systemd.install systemd/repos/testing-i686/udev-hwdb.hook systemd/repos/testing-x86_64/PKGBUILD systemd/repos/testing-x86_64/arch.conf systemd/repos/testing-x86_64/initcpio-hook-udev systemd/repos/testing-x86_64/initcpio-install-systemd systemd/repos/testing-x86_64/initcpio-install-udev systemd/repos/testing-x86_64/loader.conf systemd/repos/testing-x86_64/splash-arch.bmp systemd/repos/testing-x86_64/systemd.install systemd/repos/testing-x86_64/udev-hwdb.hook --------------------------------------------------------------------------------+ /PKGBUILD | 452 ++++++++++ /arch.conf | 14 /initcpio-hook-udev | 44 /initcpio-install-systemd | 390 ++++++++ /initcpio-install-udev | 56 + /loader.conf | 2 /systemd.install | 160 +++ /udev-hwdb.hook | 22 testing-i686/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch | 62 + testing-i686/0001-disable-RestrictAddressFamilies-on-i686.patch | 30 testing-i686/PKGBUILD | 181 ---- testing-i686/arch.conf | 7 testing-i686/initcpio-hook-udev | 22 testing-i686/initcpio-install-systemd | 195 ---- testing-i686/initcpio-install-udev | 28 testing-i686/loader.conf | 1 testing-i686/systemd.install | 80 - testing-i686/udev-hwdb.hook | 11 testing-x86_64/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch | 62 + testing-x86_64/0001-disable-RestrictAddressFamilies-on-i686.patch | 30 testing-x86_64/PKGBUILD | 181 ---- testing-x86_64/arch.conf | 7 testing-x86_64/initcpio-hook-udev | 22 testing-x86_64/initcpio-install-systemd | 195 ---- testing-x86_64/initcpio-install-udev | 28 testing-x86_64/loader.conf | 1 testing-x86_64/systemd.install | 80 - testing-x86_64/udev-hwdb.hook | 11 28 files changed, 1324 insertions(+), 1050 deletions(-) Copied: systemd/repos/testing-i686/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (from rev 280260, systemd/trunk/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch) =================================================================== --- testing-i686/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (rev 0) +++ testing-i686/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,62 @@ +From 481712d9ee88395042f0640f272c1f87142bc0a8 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <dreis...@archlinux.org> +Date: Wed, 9 Nov 2016 11:14:03 -0500 +Subject: [PATCH] Revert "nspawn: try to bind mount resolved's resolv.conf + snippet into the container" + +This reverts commit 3539724c26a1b2b00c4eb3c004b635a4b8647de6. +--- + src/nspawn/nspawn.c | 27 ++++++++------------------- + 1 file changed, 8 insertions(+), 19 deletions(-) + +diff --git a/src/nspawn/nspawn.c b/src/nspawn/nspawn.c +index c8b18bc..93df7c6 100644 +--- a/src/nspawn/nspawn.c ++++ b/src/nspawn/nspawn.c +@@ -1309,35 +1309,24 @@ static int setup_resolv_conf(const char *dest) { + /* Fix resolv.conf, if possible */ + where = prefix_roota(dest, "/etc/resolv.conf"); + +- if (access("/usr/lib/systemd/resolv.conf", F_OK) >= 0) { +- /* resolved is enabled on the host. In this, case bind mount its static resolv.conf file into the +- * container, so that the container can use the host's resolver. Given that network namespacing is +- * disabled it's only natural of the container also uses the host's resolver. It also has the big +- * advantage that the container will be able to follow the host's DNS server configuration changes +- * transparently. */ +- +- r = mount_verbose(LOG_WARNING, "/usr/lib/systemd/resolv.conf", where, NULL, MS_BIND, NULL); +- if (r >= 0) +- return mount_verbose(LOG_ERR, NULL, where, NULL, +- MS_BIND|MS_REMOUNT|MS_RDONLY|MS_NOSUID|MS_NODEV, NULL); +- } +- +- /* If that didn't work, let's copy the file */ + r = copy_file("/etc/resolv.conf", where, O_TRUNC|O_NOFOLLOW, 0644, 0); + if (r < 0) { +- /* If the file already exists as symlink, let's suppress the warning, under the assumption that +- * resolved or something similar runs inside and the symlink points there. ++ /* If the file already exists as symlink, let's ++ * suppress the warning, under the assumption that ++ * resolved or something similar runs inside and the ++ * symlink points there. + * +- * If the disk image is read-only, there's also no point in complaining. ++ * If the disk image is read-only, there's also no ++ * point in complaining. + */ + log_full_errno(IN_SET(r, -ELOOP, -EROFS) ? LOG_DEBUG : LOG_WARNING, r, +- "Failed to copy /etc/resolv.conf to %s, ignoring: %m", where); ++ "Failed to copy /etc/resolv.conf to %s: %m", where); + return 0; + } + + r = userns_lchown(where, 0, 0); + if (r < 0) +- log_warning_errno(r, "Failed to chown /etc/resolv.conf, ignoring: %m"); ++ log_warning_errno(r, "Failed to chown /etc/resolv.conf: %m"); + + return 0; + } +-- +2.10.2 + Copied: systemd/repos/testing-i686/0001-disable-RestrictAddressFamilies-on-i686.patch (from rev 280260, systemd/trunk/0001-disable-RestrictAddressFamilies-on-i686.patch) =================================================================== --- testing-i686/0001-disable-RestrictAddressFamilies-on-i686.patch (rev 0) +++ testing-i686/0001-disable-RestrictAddressFamilies-on-i686.patch 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,30 @@ +From ff59e06f9423af0532aaeedf931474823f764875 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <dreis...@archlinux.org> +Date: Wed, 9 Nov 2016 08:00:26 -0500 +Subject: [PATCH] disable RestrictAddressFamilies on i686 + +Shit's broke, yo. + +https://github.com/systemd/systemd/issues/4575 +--- + src/core/execute.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/src/core/execute.c b/src/core/execute.c +index f666f7c..7d09154 100644 +--- a/src/core/execute.c ++++ b/src/core/execute.c +@@ -1254,6 +1254,10 @@ static int apply_address_families(const Unit* u, const ExecContext *c) { + Iterator i; + int r; + ++#if defined(__i386__) ++ return 0; ++#endif ++ + assert(c); + + if (skip_seccomp_unavailable(u, "RestrictAddressFamilies=")) +-- +2.10.2 + Deleted: testing-i686/PKGBUILD =================================================================== --- testing-i686/PKGBUILD 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/PKGBUILD 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,181 +0,0 @@ -# Maintainer: Dave Reisner <dreis...@archlinux.org> -# Maintainer: Tom Gundersen <t...@jklm.no> - -pkgbase=systemd -pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat') -pkgver=232 -pkgrel=1 -arch=('i686' 'x86_64') -url="https://www.github.com/systemd/systemd" -makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gperf' 'lz4' 'xz' 'pam' 'libelf' - 'intltool' 'iptables' 'kmod' 'libcap' 'libidn' 'libgcrypt' - 'libmicrohttpd' 'libxslt' 'util-linux' 'linux-api-headers' - 'python-lxml' 'quota-tools' 'shadow' 'gnu-efi-libs' 'git') -options=('strip') -source=("git://github.com/systemd/systemd.git#tag=v$pkgver" - 'initcpio-hook-udev' - 'initcpio-install-systemd' - 'initcpio-install-udev' - 'arch.conf' - 'loader.conf' - 'splash-arch.bmp' - 'udev-hwdb.hook') -sha512sums=('SKIP' - 'f0d933e8c6064ed830dec54049b0a01e27be87203208f6ae982f10fb4eddc7258cb2919d594cbfb9a33e74c3510cfd682f3416ba8e804387ab87d1a217eb4b73' - '5a3cf61bb0b8da6061c13fbfce7191c545ccf4c95c5bbf3e47f2b41225f35a4a366e691a04f90b76fd24536ea4cb29ff24585408d4a9972cd0f1279544604abb' - 'fec639de0d99967ed3e67289eff5ff78fff0c5829d350e73bed536a8391f1daa1d118d72dbdc1f480ffd33fc22b72f4817d0973bd09ec7f182fd26ad87b24355' - '61032d29241b74a0f28446f8cf1be0e8ec46d0847a61dadb2a4f096e8686d5f57fe5c72bcf386003f6520bc4b5856c32d63bf3efe7eb0bc0deefc9f68159e648' - 'c416e2121df83067376bcaacb58c05b01990f4614ad9de657d74b6da3efa441af251d13bf21e3f0f71ddcb4c9ea658b81da3d915667dc5c309c87ec32a1cb5a5' - '5a1d78b5170da5abe3d18fdf9f2c3a4d78f15ba7d1ee9ec2708c4c9c2e28973469bc19386f70b3cf32ffafbe4fcc4303e5ebbd6d5187a1df3314ae0965b25e75' - '888ab01bc6e09beb08d7126472c34c9e1aa35ea34e62a09e900ae34c93b1de2fcc988586efd8d0dc962393974f45c77b206d59a86cf53e370f061bf9a1b1a862') - -_backports=( -) - -prepare() { - cd "$pkgbase" - - if (( ${#_backports[*]} > 0 )); then - git cherry-pick -n "${_backports[@]}" - fi - - ./autogen.sh -} - -build() { - cd "$pkgbase" - - local timeservers=({0..3}.arch.pool.ntp.org) - - local configure_options=( - --libexecdir=/usr/lib - --localstatedir=/var - --sysconfdir=/etc - - --enable-lz4 - --enable-gnuefi - --disable-audit - --disable-ima - - --with-sysvinit-path= - --with-sysvrcnd-path= - --with-ntp-servers="${timeservers[*]}" - --with-default-dnssec=no - --with-dbuspolicydir=/usr/share/dbus-1/system.d - --without-kill-user-processes - ) - - ./configure "${configure_options[@]}" - - make -} - -package_systemd() { - pkgdesc="system and service manager" - license=('GPL2' 'LGPL2.1') - depends=('acl' 'bash' 'dbus' 'iptables' 'kbd' 'kmod' 'hwids' 'libcap' - 'libgcrypt' 'libsystemd' 'libidn' 'lz4' 'pam' 'libelf' 'libseccomp' - 'util-linux' 'xz') - provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver") - replaces=('nss-myhostname' 'systemd-tools' 'udev') - conflicts=('nss-myhostname' 'systemd-tools' 'udev') - optdepends=('cryptsetup: required for encrypted block devices' - 'libmicrohttpd: remote journald capabilities' - 'quota-tools: kernel-level quota management' - 'systemd-sysvcompat: symlink package to provide sysvinit binaries' - 'polkit: allow administration as unprivileged user') - backup=(etc/pam.d/systemd-user - etc/systemd/coredump.conf - etc/systemd/journald.conf - etc/systemd/journal-remote.conf - etc/systemd/journal-upload.conf - etc/systemd/logind.conf - etc/systemd/system.conf - etc/systemd/timesyncd.conf - etc/systemd/resolved.conf - etc/systemd/user.conf - etc/udev/udev.conf) - install="systemd.install" - - make -C "$pkgbase" DESTDIR="$pkgdir" install - - # don't write units to /etc by default. some of these will be re-enabled on - # post_install. - rm -r "$pkgdir/etc/systemd/system/"*.wants - - # get rid of RPM macros - rm -r "$pkgdir/usr/lib/rpm" - - # add back tmpfiles.d/legacy.conf - install -m644 "$pkgbase/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d" - - # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group - sed -i 's#GROUP="dialout"#GROUP="uucp"#g; - s#GROUP="tape"#GROUP="storage"#g; - s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules - sed -i 's/dialout/uucp/g; - s/tape/storage/g; - s/cdrom/optical/g' "$pkgdir"/usr/lib/sysusers.d/basic.conf - - # add mkinitcpio hooks - install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd" - install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev" - install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev" - - # ensure proper permissions for /var/log/journal. This is only to placate - chown root:systemd-journal "$pkgdir/var/log/journal" - chmod 2755 "$pkgdir/var/log/journal" - - # we'll create this on installation - rmdir "$pkgdir/var/log/journal/remote" - - # fix pam file - sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user" - - # ship default policy to leave services disabled - echo 'disable *' >"$pkgdir"/usr/lib/systemd/system-preset/99-default.preset - - ### manpages shipped with systemd-sysvcompat - rm "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 - - ### runtime libraries shipped with libsystemd - rm "$pkgdir"/usr/lib/lib{nss,systemd,udev}*.so* - - # add example bootctl configuration - install -Dm644 "$srcdir/arch.conf" "$pkgdir"/usr/share/systemd/bootctl/arch.conf - install -Dm644 "$srcdir/loader.conf" "$pkgdir"/usr/share/systemd/bootctl/loader.conf - install -Dm644 "$srcdir/splash-arch.bmp" "$pkgdir"/usr/share/systemd/bootctl/splash-arch.bmp - - install -Dm644 "$srcdir/udev-hwdb.hook" "$pkgdir/usr/share/libalpm/hooks/udev-hwdb.hook" -} - -package_libsystemd() { - pkgdesc="systemd client libraries" - depends=('glibc' 'libcap' 'libgcrypt' 'lz4' 'xz') - license=('GPL2') - provides=('libsystemd.so' 'libudev.so') - - make -C "$pkgbase" DESTDIR="$pkgdir" install-rootlibLTLIBRARIES -} - -package_systemd-sysvcompat() { - pkgdesc="sysvinit compat for systemd" - license=('GPL2') - groups=('base') - conflicts=('sysvinit') - depends=('systemd') - - install -dm755 "$pkgdir"/usr/share/man/man8 - cp -d --no-preserve=ownership,timestamp \ - "$pkgbase"/man/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \ - "$pkgdir"/usr/share/man/man8 - - install -dm755 "$pkgdir/usr/bin" - for tool in runlevel reboot shutdown poweroff halt telinit; do - ln -s 'systemctl' "$pkgdir/usr/bin/$tool" - done - - ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init" -} - -# vim: ft=sh syn=sh et Copied: systemd/repos/testing-i686/PKGBUILD (from rev 280260, systemd/trunk/PKGBUILD) =================================================================== --- testing-i686/PKGBUILD (rev 0) +++ testing-i686/PKGBUILD 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,226 @@ +# Maintainer: Dave Reisner <dreis...@archlinux.org> +# Maintainer: Tom Gundersen <t...@jklm.no> + +pkgbase=systemd +pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat') +pkgver=232 +pkgrel=2 +arch=('i686' 'x86_64') +url="https://www.github.com/systemd/systemd" +makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gperf' 'lz4' 'xz' 'pam' 'libelf' + 'intltool' 'iptables' 'kmod' 'libcap' 'libidn' 'libgcrypt' + 'libmicrohttpd' 'libxslt' 'util-linux' 'linux-api-headers' + 'python-lxml' 'quota-tools' 'shadow' 'gnu-efi-libs' 'git') +options=('strip') +source=("git://github.com/systemd/systemd.git#tag=v$pkgver" + 'initcpio-hook-udev' + 'initcpio-install-systemd' + 'initcpio-install-udev' + 'arch.conf' + 'loader.conf' + 'splash-arch.bmp' + 'udev-hwdb.hook' + '0001-disable-RestrictAddressFamilies-on-i686.patch' + '0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch') +sha512sums=('SKIP' + 'f0d933e8c6064ed830dec54049b0a01e27be87203208f6ae982f10fb4eddc7258cb2919d594cbfb9a33e74c3510cfd682f3416ba8e804387ab87d1a217eb4b73' + '5a3cf61bb0b8da6061c13fbfce7191c545ccf4c95c5bbf3e47f2b41225f35a4a366e691a04f90b76fd24536ea4cb29ff24585408d4a9972cd0f1279544604abb' + 'fec639de0d99967ed3e67289eff5ff78fff0c5829d350e73bed536a8391f1daa1d118d72dbdc1f480ffd33fc22b72f4817d0973bd09ec7f182fd26ad87b24355' + '61032d29241b74a0f28446f8cf1be0e8ec46d0847a61dadb2a4f096e8686d5f57fe5c72bcf386003f6520bc4b5856c32d63bf3efe7eb0bc0deefc9f68159e648' + 'c416e2121df83067376bcaacb58c05b01990f4614ad9de657d74b6da3efa441af251d13bf21e3f0f71ddcb4c9ea658b81da3d915667dc5c309c87ec32a1cb5a5' + '5a1d78b5170da5abe3d18fdf9f2c3a4d78f15ba7d1ee9ec2708c4c9c2e28973469bc19386f70b3cf32ffafbe4fcc4303e5ebbd6d5187a1df3314ae0965b25e75' + '888ab01bc6e09beb08d7126472c34c9e1aa35ea34e62a09e900ae34c93b1de2fcc988586efd8d0dc962393974f45c77b206d59a86cf53e370f061bf9a1b1a862' + '89f9b2d3918c679ce4f76c2b10dc7fcb7e04f1925a5f92542f06891de2a123a91df7eb67fd4ce71506a8132f5440b3560b7bb667e1c1813944b115c1dfe35e3f' + 'b993a42c5534582631f7b379d54f6abc37e3aaa56ecf869a6d86ff14ae5a52628f4e447b6a30751bc1c14c30cec63a5c6d0aa268362d235ed477b639cac3a219') +validpgpkeys=( + '63CDA1E5D3FC22B998D20DD6327F26951A015CC4' # Lennart Poettering +) + +_backports=( +) + +_validate_tag() { + local success fingerprint trusted status tag=v$pkgver + + parse_gpg_statusfile /dev/stdin < <(git verify-tag --raw "$tag" 2>&1) + + if (( ! success )); then + error 'failed to validate tag %s\n' "$tag" + return 1 + fi + + if ! in_array "$fingerprint" "${validpgpkeys[@]}" && (( ! trusted )); then + error 'unknown or untrusted public key: %s\n' "$fingerprint" + return 1 + fi + + case $status in + 'expired') + warning 'the signature has expired' + ;; + 'expiredkey') + warning 'the key has expired' + ;; + esac + + return 0 +} + +prepare() { + cd "$pkgbase" + + _validate_tag || return + + if (( ${#_backports[*]} > 0 )); then + git cherry-pick -n "${_backports[@]}" + fi + + # these patches aren't upstream, but they make v232 more useable. + + # https://github.com/systemd/systemd/issues/4575 + patch -Np1 <../0001-disable-RestrictAddressFamilies-on-i686.patch + + # https://github.com/systemd/systemd/issues/4595 + # https://github.com/systemd/systemd/issues/3826 + patch -Np1 <../0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch + + ./autogen.sh +} + +build() { + cd "$pkgbase" + + local timeservers=({0..3}.arch.pool.ntp.org) + + local configure_options=( + --libexecdir=/usr/lib + --localstatedir=/var + --sysconfdir=/etc + + --enable-lz4 + --enable-gnuefi + --disable-audit + --disable-ima + + --with-sysvinit-path= + --with-sysvrcnd-path= + --with-ntp-servers="${timeservers[*]}" + --with-default-dnssec=no + --with-dbuspolicydir=/usr/share/dbus-1/system.d + --without-kill-user-processes + ) + + ./configure "${configure_options[@]}" + + make +} + +package_systemd() { + pkgdesc="system and service manager" + license=('GPL2' 'LGPL2.1') + depends=('acl' 'bash' 'dbus' 'iptables' 'kbd' 'kmod' 'hwids' 'libcap' + 'libgcrypt' 'libsystemd' 'libidn' 'lz4' 'pam' 'libelf' 'libseccomp' + 'util-linux' 'xz') + provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver") + replaces=('nss-myhostname' 'systemd-tools' 'udev') + conflicts=('nss-myhostname' 'systemd-tools' 'udev') + optdepends=('cryptsetup: required for encrypted block devices' + 'libmicrohttpd: remote journald capabilities' + 'quota-tools: kernel-level quota management' + 'systemd-sysvcompat: symlink package to provide sysvinit binaries' + 'polkit: allow administration as unprivileged user') + backup=(etc/pam.d/systemd-user + etc/systemd/coredump.conf + etc/systemd/journald.conf + etc/systemd/journal-remote.conf + etc/systemd/journal-upload.conf + etc/systemd/logind.conf + etc/systemd/system.conf + etc/systemd/timesyncd.conf + etc/systemd/resolved.conf + etc/systemd/user.conf + etc/udev/udev.conf) + install="systemd.install" + + make -C "$pkgbase" DESTDIR="$pkgdir" install + + # don't write units to /etc by default. some of these will be re-enabled on + # post_install. + rm -r "$pkgdir/etc/systemd/system/"*.wants + + # get rid of RPM macros + rm -r "$pkgdir/usr/lib/rpm" + + # add back tmpfiles.d/legacy.conf + install -m644 "$pkgbase/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d" + + # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group + sed -i 's#GROUP="dialout"#GROUP="uucp"#g; + s#GROUP="tape"#GROUP="storage"#g; + s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules + sed -i 's/dialout/uucp/g; + s/tape/storage/g; + s/cdrom/optical/g' "$pkgdir"/usr/lib/sysusers.d/basic.conf + + # add mkinitcpio hooks + install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd" + install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev" + install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev" + + # ensure proper permissions for /var/log/journal. This is only to placate + chown root:systemd-journal "$pkgdir/var/log/journal" + chmod 2755 "$pkgdir/var/log/journal" + + # we'll create this on installation + rmdir "$pkgdir/var/log/journal/remote" + + # fix pam file + sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user" + + # ship default policy to leave services disabled + echo 'disable *' >"$pkgdir"/usr/lib/systemd/system-preset/99-default.preset + + ### manpages shipped with systemd-sysvcompat + rm "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 + + ### runtime libraries shipped with libsystemd + rm "$pkgdir"/usr/lib/lib{nss,systemd,udev}*.so* + + # add example bootctl configuration + install -Dm644 "$srcdir/arch.conf" "$pkgdir"/usr/share/systemd/bootctl/arch.conf + install -Dm644 "$srcdir/loader.conf" "$pkgdir"/usr/share/systemd/bootctl/loader.conf + install -Dm644 "$srcdir/splash-arch.bmp" "$pkgdir"/usr/share/systemd/bootctl/splash-arch.bmp + + install -Dm644 "$srcdir/udev-hwdb.hook" "$pkgdir/usr/share/libalpm/hooks/udev-hwdb.hook" +} + +package_libsystemd() { + pkgdesc="systemd client libraries" + depends=('glibc' 'libcap' 'libgcrypt' 'lz4' 'xz') + license=('GPL2') + provides=('libsystemd.so' 'libudev.so') + + make -C "$pkgbase" DESTDIR="$pkgdir" install-rootlibLTLIBRARIES +} + +package_systemd-sysvcompat() { + pkgdesc="sysvinit compat for systemd" + license=('GPL2') + groups=('base') + conflicts=('sysvinit') + depends=('systemd') + + install -dm755 "$pkgdir"/usr/share/man/man8 + cp -d --no-preserve=ownership,timestamp \ + "$pkgbase"/man/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \ + "$pkgdir"/usr/share/man/man8 + + install -dm755 "$pkgdir/usr/bin" + for tool in runlevel reboot shutdown poweroff halt telinit; do + ln -s 'systemctl' "$pkgdir/usr/bin/$tool" + done + + ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init" +} + +# vim: ft=sh syn=sh et Deleted: testing-i686/arch.conf =================================================================== --- testing-i686/arch.conf 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/arch.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,7 +0,0 @@ -## This is just an example config file. -## Please edit the paths and kernel parameters according to your system. - -title Arch Linux -linux /vmlinuz-linux -initrd /initramfs-linux.img -options root=PARTUUID=XXXX rootfstype=XXXX add_efi_memmap Copied: systemd/repos/testing-i686/arch.conf (from rev 280260, systemd/trunk/arch.conf) =================================================================== --- testing-i686/arch.conf (rev 0) +++ testing-i686/arch.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,7 @@ +## This is just an example config file. +## Please edit the paths and kernel parameters according to your system. + +title Arch Linux +linux /vmlinuz-linux +initrd /initramfs-linux.img +options root=PARTUUID=XXXX rootfstype=XXXX add_efi_memmap Deleted: testing-i686/initcpio-hook-udev =================================================================== --- testing-i686/initcpio-hook-udev 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/initcpio-hook-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,22 +0,0 @@ -#!/usr/bin/ash - -run_earlyhook() { - kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf - systemd-tmpfiles --prefix=/dev --create --boot - /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never - udevd_running=1 -} - -run_hook() { - msg ":: Triggering uevents..." - udevadm trigger --action=add --type=subsystems - udevadm trigger --action=add --type=devices - udevadm settle -} - -run_cleanuphook() { - udevadm control --exit - udevadm info --cleanup-db -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-i686/initcpio-hook-udev (from rev 280260, systemd/trunk/initcpio-hook-udev) =================================================================== --- testing-i686/initcpio-hook-udev (rev 0) +++ testing-i686/initcpio-hook-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,22 @@ +#!/usr/bin/ash + +run_earlyhook() { + kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf + systemd-tmpfiles --prefix=/dev --create --boot + /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never + udevd_running=1 +} + +run_hook() { + msg ":: Triggering uevents..." + udevadm trigger --action=add --type=subsystems + udevadm trigger --action=add --type=devices + udevadm settle +} + +run_cleanuphook() { + udevadm control --exit + udevadm info --cleanup-db +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-i686/initcpio-install-systemd =================================================================== --- testing-i686/initcpio-install-systemd 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/initcpio-install-systemd 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,195 +0,0 @@ -#!/bin/bash - -strip_quotes() { - local len=${#1} quotes=$'[\'"]' str=${!1} - - if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then - printf -v "$1" %s "${str:1:-1}" - fi -} - -add_udev_rule() { - # Add an udev rules file to the initcpio image. Dependencies on binaries - # will be discovered and added. - # $1: path to rules file (or name of rules file) - - local rules= rule= key= value= binary= - - rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1") - if [[ -z $rules ]]; then - # complain about not found rules - return 1 - fi - - add_file "$rules" - - while IFS=, read -ra rule; do - # skip empty lines, comments - [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue - - for pair in "${rule[@]}"; do - IFS=' =' read -r key value <<< "$pair" - case $key in - RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD}) - strip_quotes 'value' - # just take the first word as the binary name - binary=${value%% *} - [[ ${binary:0:1} == '$' ]] && continue - if [[ ${binary:0:1} != '/' ]]; then - binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary") - fi - add_binary "$binary" - ;; - esac - done - done <"$rules" -} - -add_systemd_unit() { - # Add a systemd unit file to the initcpio image. Hard dependencies on binaries - # and other unit files will be discovered and added. - # $1: path to rules file (or name of rules file) - - local unit= rule= entry= key= value= binary= dep= - - unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1") - if [[ -z $unit ]]; then - # complain about not found unit file - return 1 - fi - - add_file "$unit" - - while IFS='=' read -r key values; do - read -ra values <<< "$values" - - case $key in - Requires|OnFailure) - # only add hard dependencies (not Wants) - map add_systemd_unit "${values[@]}" - ;; - Exec*) - # don't add binaries unless they are required - if [[ ${values[0]:0:1} != '-' ]]; then - add_binary "${values[0]}" - fi - ;; - esac - - done <"$unit" - - # preserve reverse soft dependency - for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do - if [[ -L $dep ]]; then - add_symlink "$dep" - fi - done - - # add hard dependencies - if [[ -d $unit.requires ]]; then - for dep in "$unit".requires/*; do - add_systemd_unit ${dep##*/} - done - fi -} - -add_systemd_drop_in() { - local unit=$1 dropin_name=$2 - - mkdir -p "$BUILDROOT/etc/systemd/system/$unit.d" - cat >"$BUILDROOT/etc/systemd/system/$unit.d/$2.conf" -} - -build() { - local rules unit - - # from base - add_binary /bin/mount - add_binary /usr/bin/kmod /usr/bin/modprobe - add_binary /usr/lib/systemd/systemd /init - add_binary /usr/bin/sulogin - - map add_binary \ - /usr/bin/systemd-tmpfiles \ - /usr/lib/systemd/systemd-hibernate-resume \ - /usr/lib/systemd/system-generators/systemd-fstab-generator \ - /usr/lib/systemd/system-generators/systemd-gpt-auto-generator \ - /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator - - # udev rules and systemd units - map add_udev_rule "$rules" \ - 50-udev-default.rules \ - 60-persistent-storage.rules \ - 64-btrfs.rules \ - 80-drivers.rules \ - 99-systemd.rules - - map add_systemd_unit \ - initrd-cleanup.service \ - initrd-fs.target \ - initrd-parse-etc.service \ - initrd-root-fs.target \ - initrd-root-device.target \ - initrd-switch-root.service \ - initrd-switch-root.target \ - initrd-udevadm-cleanup-db.service \ - initrd.target \ - kmod-static-nodes.service \ - local-fs.target \ - local-fs-pre.target \ - paths.target \ - reboot.target \ - slices.target \ - sockets.target \ - swap.target \ - systemd-fsck@.service \ - systemd-hibernate-resume@.service \ - systemd-journald.service \ - systemd-journald-audit.socket \ - systemd-journald-dev-log.socket \ - systemd-modules-load.service \ - systemd-tmpfiles-setup-dev.service \ - systemd-udev-trigger.service \ - systemd-udevd-control.socket \ - systemd-udevd-kernel.socket \ - systemd-udevd.service \ - timers.target \ - rescue.target \ - emergency.target - - add_symlink "/usr/lib/systemd/system/default.target" "initrd.target" - add_symlink "/usr/lib/systemd/system/ctrl-alt-del.target" "reboot.target" - - # udev wants /etc/group since it doesn't launch with --resolve-names=never - add_file "/etc/nsswitch.conf" - add_binary "$(readlink -f /usr/lib/libnss_files.so)" - - echo "root:x:0:0:root:/:/bin/sh" >"$BUILDROOT/etc/passwd" - echo "root:x:0:root" >"$BUILDROOT/etc/group" - echo "root::::::::" >"$BUILDROOT/etc/shadow" - - add_systemd_drop_in systemd-udevd.service resolve-names <<EOF -[Service] -ExecStart= -ExecStart=/usr/lib/systemd/systemd-udevd --resolve-names=never -EOF - - add_dir "/etc/modules-load.d" - ( - . "$_f_config" - set -f - printf "%s\n" $MODULES >"$BUILDROOT/etc/modules-load.d/MODULES.conf" - ) -} - -help() { - cat <<HELPEOF -This will install a basic systemd setup in your initramfs, and is meant to -replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime -components will need to be ported, and will not work as intended. You also may -wish to still include the 'base' hook (before this hook) to ensure that a -rescue shell exists on your initramfs. -HELPEOF -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-i686/initcpio-install-systemd (from rev 280260, systemd/trunk/initcpio-install-systemd) =================================================================== --- testing-i686/initcpio-install-systemd (rev 0) +++ testing-i686/initcpio-install-systemd 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,195 @@ +#!/bin/bash + +strip_quotes() { + local len=${#1} quotes=$'[\'"]' str=${!1} + + if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then + printf -v "$1" %s "${str:1:-1}" + fi +} + +add_udev_rule() { + # Add an udev rules file to the initcpio image. Dependencies on binaries + # will be discovered and added. + # $1: path to rules file (or name of rules file) + + local rules= rule= key= value= binary= + + rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1") + if [[ -z $rules ]]; then + # complain about not found rules + return 1 + fi + + add_file "$rules" + + while IFS=, read -ra rule; do + # skip empty lines, comments + [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue + + for pair in "${rule[@]}"; do + IFS=' =' read -r key value <<< "$pair" + case $key in + RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD}) + strip_quotes 'value' + # just take the first word as the binary name + binary=${value%% *} + [[ ${binary:0:1} == '$' ]] && continue + if [[ ${binary:0:1} != '/' ]]; then + binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary") + fi + add_binary "$binary" + ;; + esac + done + done <"$rules" +} + +add_systemd_unit() { + # Add a systemd unit file to the initcpio image. Hard dependencies on binaries + # and other unit files will be discovered and added. + # $1: path to rules file (or name of rules file) + + local unit= rule= entry= key= value= binary= dep= + + unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1") + if [[ -z $unit ]]; then + # complain about not found unit file + return 1 + fi + + add_file "$unit" + + while IFS='=' read -r key values; do + read -ra values <<< "$values" + + case $key in + Requires|OnFailure) + # only add hard dependencies (not Wants) + map add_systemd_unit "${values[@]}" + ;; + Exec*) + # don't add binaries unless they are required + if [[ ${values[0]:0:1} != '-' ]]; then + add_binary "${values[0]}" + fi + ;; + esac + + done <"$unit" + + # preserve reverse soft dependency + for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do + if [[ -L $dep ]]; then + add_symlink "$dep" + fi + done + + # add hard dependencies + if [[ -d $unit.requires ]]; then + for dep in "$unit".requires/*; do + add_systemd_unit ${dep##*/} + done + fi +} + +add_systemd_drop_in() { + local unit=$1 dropin_name=$2 + + mkdir -p "$BUILDROOT/etc/systemd/system/$unit.d" + cat >"$BUILDROOT/etc/systemd/system/$unit.d/$2.conf" +} + +build() { + local rules unit + + # from base + add_binary /bin/mount + add_binary /usr/bin/kmod /usr/bin/modprobe + add_binary /usr/lib/systemd/systemd /init + add_binary /usr/bin/sulogin + + map add_binary \ + /usr/bin/systemd-tmpfiles \ + /usr/lib/systemd/systemd-hibernate-resume \ + /usr/lib/systemd/system-generators/systemd-fstab-generator \ + /usr/lib/systemd/system-generators/systemd-gpt-auto-generator \ + /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator + + # udev rules and systemd units + map add_udev_rule "$rules" \ + 50-udev-default.rules \ + 60-persistent-storage.rules \ + 64-btrfs.rules \ + 80-drivers.rules \ + 99-systemd.rules + + map add_systemd_unit \ + initrd-cleanup.service \ + initrd-fs.target \ + initrd-parse-etc.service \ + initrd-root-fs.target \ + initrd-root-device.target \ + initrd-switch-root.service \ + initrd-switch-root.target \ + initrd-udevadm-cleanup-db.service \ + initrd.target \ + kmod-static-nodes.service \ + local-fs.target \ + local-fs-pre.target \ + paths.target \ + reboot.target \ + slices.target \ + sockets.target \ + swap.target \ + systemd-fsck@.service \ + systemd-hibernate-resume@.service \ + systemd-journald.service \ + systemd-journald-audit.socket \ + systemd-journald-dev-log.socket \ + systemd-modules-load.service \ + systemd-tmpfiles-setup-dev.service \ + systemd-udev-trigger.service \ + systemd-udevd-control.socket \ + systemd-udevd-kernel.socket \ + systemd-udevd.service \ + timers.target \ + rescue.target \ + emergency.target + + add_symlink "/usr/lib/systemd/system/default.target" "initrd.target" + add_symlink "/usr/lib/systemd/system/ctrl-alt-del.target" "reboot.target" + + # udev wants /etc/group since it doesn't launch with --resolve-names=never + add_file "/etc/nsswitch.conf" + add_binary "$(readlink -f /usr/lib/libnss_files.so)" + + echo "root:x:0:0:root:/:/bin/sh" >"$BUILDROOT/etc/passwd" + echo "root:x:0:root" >"$BUILDROOT/etc/group" + echo "root::::::::" >"$BUILDROOT/etc/shadow" + + add_systemd_drop_in systemd-udevd.service resolve-names <<EOF +[Service] +ExecStart= +ExecStart=/usr/lib/systemd/systemd-udevd --resolve-names=never +EOF + + add_dir "/etc/modules-load.d" + ( + . "$_f_config" + set -f + printf "%s\n" $MODULES >"$BUILDROOT/etc/modules-load.d/MODULES.conf" + ) +} + +help() { + cat <<HELPEOF +This will install a basic systemd setup in your initramfs, and is meant to +replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime +components will need to be ported, and will not work as intended. You also may +wish to still include the 'base' hook (before this hook) to ensure that a +rescue shell exists on your initramfs. +HELPEOF +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-i686/initcpio-install-udev =================================================================== --- testing-i686/initcpio-install-udev 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/initcpio-install-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,28 +0,0 @@ -#!/bin/bash - -build() { - local rules tool - - add_binary /usr/lib/systemd/systemd-udevd - add_binary /usr/bin/udevadm - add_binary /usr/bin/systemd-tmpfiles - - for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do - add_file "/usr/lib/udev/rules.d/$rules" - done - for tool in ata_id scsi_id; do - add_file "/usr/lib/udev/$tool" - done - - add_runscript -} - -help() { - cat <<HELPEOF -This hook will use udev to create your root device node and detect the needed -modules for your root device. It is also required for firmware loading in -initramfs. It is recommended to use this hook. -HELPEOF -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-i686/initcpio-install-udev (from rev 280260, systemd/trunk/initcpio-install-udev) =================================================================== --- testing-i686/initcpio-install-udev (rev 0) +++ testing-i686/initcpio-install-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,28 @@ +#!/bin/bash + +build() { + local rules tool + + add_binary /usr/lib/systemd/systemd-udevd + add_binary /usr/bin/udevadm + add_binary /usr/bin/systemd-tmpfiles + + for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do + add_file "/usr/lib/udev/rules.d/$rules" + done + for tool in ata_id scsi_id; do + add_file "/usr/lib/udev/$tool" + done + + add_runscript +} + +help() { + cat <<HELPEOF +This hook will use udev to create your root device node and detect the needed +modules for your root device. It is also required for firmware loading in +initramfs. It is recommended to use this hook. +HELPEOF +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-i686/loader.conf =================================================================== --- testing-i686/loader.conf 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/loader.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -1 +0,0 @@ -default arch Copied: systemd/repos/testing-i686/loader.conf (from rev 280260, systemd/trunk/loader.conf) =================================================================== --- testing-i686/loader.conf (rev 0) +++ testing-i686/loader.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1 @@ +default arch Deleted: testing-i686/splash-arch.bmp =================================================================== (Binary files differ) Copied: systemd/repos/testing-i686/splash-arch.bmp (from rev 280260, systemd/trunk/splash-arch.bmp) =================================================================== (Binary files differ) Deleted: testing-i686/systemd.install =================================================================== --- testing-i686/systemd.install 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/systemd.install 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,80 +0,0 @@ -#!/bin/bash - -sd_booted() { - [[ -d run/systemd/system && ! -L run/systemd/system ]] -} - -add_journal_acls() { - # ignore errors, since the filesystem might not support ACLs - setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx var/log/journal/ 2>/dev/null - : -} - -post_common() { - systemd-sysusers - journalctl --update-catalog -} - -_216_2_changes() { - echo ':: Coredumps are handled by systemd by default. Collection behavior can be' - echo ' tuned in /etc/systemd/coredump.conf.' -} - -_219_2_changes() { - if mkdir -m2755 var/log/journal/remote 2>/dev/null; then - chgrp systemd-journal-remote var/log/journal/remote - fi -} - -_219_4_changes() { - if ! systemctl is-enabled -q remote-fs.target; then - systemctl enable -q remote-fs.target - fi -} - -_230_1_changes() { - echo ':: systemd-bootchart is no longer included with systemd' -} - -post_install() { - systemd-machine-id-setup - - post_common "$@" - - add_journal_acls - - # enable some services by default, but don't track them - systemctl enable getty@tty1.service remote-fs.target - - echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your" - echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat" - - # group 'systemd-journal-remote' is created by systemd-sysusers - mkdir -m2755 var/log/journal/remote - chgrp systemd-journal-remote var/log/journal/remote -} - -post_upgrade() { - post_common "$@" - - # don't reexec if the old version is 231-1 or 231-2. - # https://github.com/systemd/systemd/commit/bd64d82c1c - if [[ $1 != 231-[12] ]] && sd_booted; then - systemctl --system daemon-reexec - fi - - local v upgrades=( - 216-2 - 219-2 - 219-4 - 230-1 - ) - - for v in "${upgrades[@]}"; do - if [[ $(vercmp "$v" "$2") -eq 1 ]]; then - "_${v//-/_}_changes" - fi - done -} - -# vim:set ts=2 sw=2 et: Copied: systemd/repos/testing-i686/systemd.install (from rev 280260, systemd/trunk/systemd.install) =================================================================== --- testing-i686/systemd.install (rev 0) +++ testing-i686/systemd.install 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,80 @@ +#!/bin/bash + +sd_booted() { + [[ -d run/systemd/system && ! -L run/systemd/system ]] +} + +add_journal_acls() { + # ignore errors, since the filesystem might not support ACLs + setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx var/log/journal/ 2>/dev/null + : +} + +post_common() { + systemd-sysusers + journalctl --update-catalog +} + +_216_2_changes() { + echo ':: Coredumps are handled by systemd by default. Collection behavior can be' + echo ' tuned in /etc/systemd/coredump.conf.' +} + +_219_2_changes() { + if mkdir -m2755 var/log/journal/remote 2>/dev/null; then + chgrp systemd-journal-remote var/log/journal/remote + fi +} + +_219_4_changes() { + if ! systemctl is-enabled -q remote-fs.target; then + systemctl enable -q remote-fs.target + fi +} + +_230_1_changes() { + echo ':: systemd-bootchart is no longer included with systemd' +} + +post_install() { + systemd-machine-id-setup + + post_common "$@" + + add_journal_acls + + # enable some services by default, but don't track them + systemctl enable getty@tty1.service remote-fs.target + + echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your" + echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat" + + # group 'systemd-journal-remote' is created by systemd-sysusers + mkdir -m2755 var/log/journal/remote + chgrp systemd-journal-remote var/log/journal/remote +} + +post_upgrade() { + post_common "$@" + + # don't reexec if the old version is 231-1 or 231-2. + # https://github.com/systemd/systemd/commit/bd64d82c1c + if [[ $1 != 231-[12] ]] && sd_booted; then + systemctl --system daemon-reexec + fi + + local v upgrades=( + 216-2 + 219-2 + 219-4 + 230-1 + ) + + for v in "${upgrades[@]}"; do + if [[ $(vercmp "$v" "$2") -eq 1 ]]; then + "_${v//-/_}_changes" + fi + done +} + +# vim:set ts=2 sw=2 et: Deleted: testing-i686/udev-hwdb.hook =================================================================== --- testing-i686/udev-hwdb.hook 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-i686/udev-hwdb.hook 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,11 +0,0 @@ -[Trigger] -Type = File -Operation = Install -Operation = Upgrade -Operation = Remove -Target = usr/lib/udev/hwdb.d/* - -[Action] -Description = Updating udev Hardware Database... -When = PostTransaction -Exec = /usr/bin/udevadm hwdb --update Copied: systemd/repos/testing-i686/udev-hwdb.hook (from rev 280260, systemd/trunk/udev-hwdb.hook) =================================================================== --- testing-i686/udev-hwdb.hook (rev 0) +++ testing-i686/udev-hwdb.hook 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,11 @@ +[Trigger] +Type = File +Operation = Install +Operation = Upgrade +Operation = Remove +Target = usr/lib/udev/hwdb.d/* + +[Action] +Description = Updating udev Hardware Database... +When = PostTransaction +Exec = /usr/bin/udevadm hwdb --update Copied: systemd/repos/testing-x86_64/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (from rev 280260, systemd/trunk/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch) =================================================================== --- testing-x86_64/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch (rev 0) +++ testing-x86_64/0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,62 @@ +From 481712d9ee88395042f0640f272c1f87142bc0a8 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <dreis...@archlinux.org> +Date: Wed, 9 Nov 2016 11:14:03 -0500 +Subject: [PATCH] Revert "nspawn: try to bind mount resolved's resolv.conf + snippet into the container" + +This reverts commit 3539724c26a1b2b00c4eb3c004b635a4b8647de6. +--- + src/nspawn/nspawn.c | 27 ++++++++------------------- + 1 file changed, 8 insertions(+), 19 deletions(-) + +diff --git a/src/nspawn/nspawn.c b/src/nspawn/nspawn.c +index c8b18bc..93df7c6 100644 +--- a/src/nspawn/nspawn.c ++++ b/src/nspawn/nspawn.c +@@ -1309,35 +1309,24 @@ static int setup_resolv_conf(const char *dest) { + /* Fix resolv.conf, if possible */ + where = prefix_roota(dest, "/etc/resolv.conf"); + +- if (access("/usr/lib/systemd/resolv.conf", F_OK) >= 0) { +- /* resolved is enabled on the host. In this, case bind mount its static resolv.conf file into the +- * container, so that the container can use the host's resolver. Given that network namespacing is +- * disabled it's only natural of the container also uses the host's resolver. It also has the big +- * advantage that the container will be able to follow the host's DNS server configuration changes +- * transparently. */ +- +- r = mount_verbose(LOG_WARNING, "/usr/lib/systemd/resolv.conf", where, NULL, MS_BIND, NULL); +- if (r >= 0) +- return mount_verbose(LOG_ERR, NULL, where, NULL, +- MS_BIND|MS_REMOUNT|MS_RDONLY|MS_NOSUID|MS_NODEV, NULL); +- } +- +- /* If that didn't work, let's copy the file */ + r = copy_file("/etc/resolv.conf", where, O_TRUNC|O_NOFOLLOW, 0644, 0); + if (r < 0) { +- /* If the file already exists as symlink, let's suppress the warning, under the assumption that +- * resolved or something similar runs inside and the symlink points there. ++ /* If the file already exists as symlink, let's ++ * suppress the warning, under the assumption that ++ * resolved or something similar runs inside and the ++ * symlink points there. + * +- * If the disk image is read-only, there's also no point in complaining. ++ * If the disk image is read-only, there's also no ++ * point in complaining. + */ + log_full_errno(IN_SET(r, -ELOOP, -EROFS) ? LOG_DEBUG : LOG_WARNING, r, +- "Failed to copy /etc/resolv.conf to %s, ignoring: %m", where); ++ "Failed to copy /etc/resolv.conf to %s: %m", where); + return 0; + } + + r = userns_lchown(where, 0, 0); + if (r < 0) +- log_warning_errno(r, "Failed to chown /etc/resolv.conf, ignoring: %m"); ++ log_warning_errno(r, "Failed to chown /etc/resolv.conf: %m"); + + return 0; + } +-- +2.10.2 + Copied: systemd/repos/testing-x86_64/0001-disable-RestrictAddressFamilies-on-i686.patch (from rev 280260, systemd/trunk/0001-disable-RestrictAddressFamilies-on-i686.patch) =================================================================== --- testing-x86_64/0001-disable-RestrictAddressFamilies-on-i686.patch (rev 0) +++ testing-x86_64/0001-disable-RestrictAddressFamilies-on-i686.patch 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,30 @@ +From ff59e06f9423af0532aaeedf931474823f764875 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <dreis...@archlinux.org> +Date: Wed, 9 Nov 2016 08:00:26 -0500 +Subject: [PATCH] disable RestrictAddressFamilies on i686 + +Shit's broke, yo. + +https://github.com/systemd/systemd/issues/4575 +--- + src/core/execute.c | 4 ++++ + 1 file changed, 4 insertions(+) + +diff --git a/src/core/execute.c b/src/core/execute.c +index f666f7c..7d09154 100644 +--- a/src/core/execute.c ++++ b/src/core/execute.c +@@ -1254,6 +1254,10 @@ static int apply_address_families(const Unit* u, const ExecContext *c) { + Iterator i; + int r; + ++#if defined(__i386__) ++ return 0; ++#endif ++ + assert(c); + + if (skip_seccomp_unavailable(u, "RestrictAddressFamilies=")) +-- +2.10.2 + Deleted: testing-x86_64/PKGBUILD =================================================================== --- testing-x86_64/PKGBUILD 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/PKGBUILD 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,181 +0,0 @@ -# Maintainer: Dave Reisner <dreis...@archlinux.org> -# Maintainer: Tom Gundersen <t...@jklm.no> - -pkgbase=systemd -pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat') -pkgver=232 -pkgrel=1 -arch=('i686' 'x86_64') -url="https://www.github.com/systemd/systemd" -makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gperf' 'lz4' 'xz' 'pam' 'libelf' - 'intltool' 'iptables' 'kmod' 'libcap' 'libidn' 'libgcrypt' - 'libmicrohttpd' 'libxslt' 'util-linux' 'linux-api-headers' - 'python-lxml' 'quota-tools' 'shadow' 'gnu-efi-libs' 'git') -options=('strip') -source=("git://github.com/systemd/systemd.git#tag=v$pkgver" - 'initcpio-hook-udev' - 'initcpio-install-systemd' - 'initcpio-install-udev' - 'arch.conf' - 'loader.conf' - 'splash-arch.bmp' - 'udev-hwdb.hook') -sha512sums=('SKIP' - 'f0d933e8c6064ed830dec54049b0a01e27be87203208f6ae982f10fb4eddc7258cb2919d594cbfb9a33e74c3510cfd682f3416ba8e804387ab87d1a217eb4b73' - '5a3cf61bb0b8da6061c13fbfce7191c545ccf4c95c5bbf3e47f2b41225f35a4a366e691a04f90b76fd24536ea4cb29ff24585408d4a9972cd0f1279544604abb' - 'fec639de0d99967ed3e67289eff5ff78fff0c5829d350e73bed536a8391f1daa1d118d72dbdc1f480ffd33fc22b72f4817d0973bd09ec7f182fd26ad87b24355' - '61032d29241b74a0f28446f8cf1be0e8ec46d0847a61dadb2a4f096e8686d5f57fe5c72bcf386003f6520bc4b5856c32d63bf3efe7eb0bc0deefc9f68159e648' - 'c416e2121df83067376bcaacb58c05b01990f4614ad9de657d74b6da3efa441af251d13bf21e3f0f71ddcb4c9ea658b81da3d915667dc5c309c87ec32a1cb5a5' - '5a1d78b5170da5abe3d18fdf9f2c3a4d78f15ba7d1ee9ec2708c4c9c2e28973469bc19386f70b3cf32ffafbe4fcc4303e5ebbd6d5187a1df3314ae0965b25e75' - '888ab01bc6e09beb08d7126472c34c9e1aa35ea34e62a09e900ae34c93b1de2fcc988586efd8d0dc962393974f45c77b206d59a86cf53e370f061bf9a1b1a862') - -_backports=( -) - -prepare() { - cd "$pkgbase" - - if (( ${#_backports[*]} > 0 )); then - git cherry-pick -n "${_backports[@]}" - fi - - ./autogen.sh -} - -build() { - cd "$pkgbase" - - local timeservers=({0..3}.arch.pool.ntp.org) - - local configure_options=( - --libexecdir=/usr/lib - --localstatedir=/var - --sysconfdir=/etc - - --enable-lz4 - --enable-gnuefi - --disable-audit - --disable-ima - - --with-sysvinit-path= - --with-sysvrcnd-path= - --with-ntp-servers="${timeservers[*]}" - --with-default-dnssec=no - --with-dbuspolicydir=/usr/share/dbus-1/system.d - --without-kill-user-processes - ) - - ./configure "${configure_options[@]}" - - make -} - -package_systemd() { - pkgdesc="system and service manager" - license=('GPL2' 'LGPL2.1') - depends=('acl' 'bash' 'dbus' 'iptables' 'kbd' 'kmod' 'hwids' 'libcap' - 'libgcrypt' 'libsystemd' 'libidn' 'lz4' 'pam' 'libelf' 'libseccomp' - 'util-linux' 'xz') - provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver") - replaces=('nss-myhostname' 'systemd-tools' 'udev') - conflicts=('nss-myhostname' 'systemd-tools' 'udev') - optdepends=('cryptsetup: required for encrypted block devices' - 'libmicrohttpd: remote journald capabilities' - 'quota-tools: kernel-level quota management' - 'systemd-sysvcompat: symlink package to provide sysvinit binaries' - 'polkit: allow administration as unprivileged user') - backup=(etc/pam.d/systemd-user - etc/systemd/coredump.conf - etc/systemd/journald.conf - etc/systemd/journal-remote.conf - etc/systemd/journal-upload.conf - etc/systemd/logind.conf - etc/systemd/system.conf - etc/systemd/timesyncd.conf - etc/systemd/resolved.conf - etc/systemd/user.conf - etc/udev/udev.conf) - install="systemd.install" - - make -C "$pkgbase" DESTDIR="$pkgdir" install - - # don't write units to /etc by default. some of these will be re-enabled on - # post_install. - rm -r "$pkgdir/etc/systemd/system/"*.wants - - # get rid of RPM macros - rm -r "$pkgdir/usr/lib/rpm" - - # add back tmpfiles.d/legacy.conf - install -m644 "$pkgbase/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d" - - # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group - sed -i 's#GROUP="dialout"#GROUP="uucp"#g; - s#GROUP="tape"#GROUP="storage"#g; - s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules - sed -i 's/dialout/uucp/g; - s/tape/storage/g; - s/cdrom/optical/g' "$pkgdir"/usr/lib/sysusers.d/basic.conf - - # add mkinitcpio hooks - install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd" - install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev" - install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev" - - # ensure proper permissions for /var/log/journal. This is only to placate - chown root:systemd-journal "$pkgdir/var/log/journal" - chmod 2755 "$pkgdir/var/log/journal" - - # we'll create this on installation - rmdir "$pkgdir/var/log/journal/remote" - - # fix pam file - sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user" - - # ship default policy to leave services disabled - echo 'disable *' >"$pkgdir"/usr/lib/systemd/system-preset/99-default.preset - - ### manpages shipped with systemd-sysvcompat - rm "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 - - ### runtime libraries shipped with libsystemd - rm "$pkgdir"/usr/lib/lib{nss,systemd,udev}*.so* - - # add example bootctl configuration - install -Dm644 "$srcdir/arch.conf" "$pkgdir"/usr/share/systemd/bootctl/arch.conf - install -Dm644 "$srcdir/loader.conf" "$pkgdir"/usr/share/systemd/bootctl/loader.conf - install -Dm644 "$srcdir/splash-arch.bmp" "$pkgdir"/usr/share/systemd/bootctl/splash-arch.bmp - - install -Dm644 "$srcdir/udev-hwdb.hook" "$pkgdir/usr/share/libalpm/hooks/udev-hwdb.hook" -} - -package_libsystemd() { - pkgdesc="systemd client libraries" - depends=('glibc' 'libcap' 'libgcrypt' 'lz4' 'xz') - license=('GPL2') - provides=('libsystemd.so' 'libudev.so') - - make -C "$pkgbase" DESTDIR="$pkgdir" install-rootlibLTLIBRARIES -} - -package_systemd-sysvcompat() { - pkgdesc="sysvinit compat for systemd" - license=('GPL2') - groups=('base') - conflicts=('sysvinit') - depends=('systemd') - - install -dm755 "$pkgdir"/usr/share/man/man8 - cp -d --no-preserve=ownership,timestamp \ - "$pkgbase"/man/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \ - "$pkgdir"/usr/share/man/man8 - - install -dm755 "$pkgdir/usr/bin" - for tool in runlevel reboot shutdown poweroff halt telinit; do - ln -s 'systemctl' "$pkgdir/usr/bin/$tool" - done - - ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init" -} - -# vim: ft=sh syn=sh et Copied: systemd/repos/testing-x86_64/PKGBUILD (from rev 280260, systemd/trunk/PKGBUILD) =================================================================== --- testing-x86_64/PKGBUILD (rev 0) +++ testing-x86_64/PKGBUILD 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,226 @@ +# Maintainer: Dave Reisner <dreis...@archlinux.org> +# Maintainer: Tom Gundersen <t...@jklm.no> + +pkgbase=systemd +pkgname=('systemd' 'libsystemd' 'systemd-sysvcompat') +pkgver=232 +pkgrel=2 +arch=('i686' 'x86_64') +url="https://www.github.com/systemd/systemd" +makedepends=('acl' 'cryptsetup' 'docbook-xsl' 'gperf' 'lz4' 'xz' 'pam' 'libelf' + 'intltool' 'iptables' 'kmod' 'libcap' 'libidn' 'libgcrypt' + 'libmicrohttpd' 'libxslt' 'util-linux' 'linux-api-headers' + 'python-lxml' 'quota-tools' 'shadow' 'gnu-efi-libs' 'git') +options=('strip') +source=("git://github.com/systemd/systemd.git#tag=v$pkgver" + 'initcpio-hook-udev' + 'initcpio-install-systemd' + 'initcpio-install-udev' + 'arch.conf' + 'loader.conf' + 'splash-arch.bmp' + 'udev-hwdb.hook' + '0001-disable-RestrictAddressFamilies-on-i686.patch' + '0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch') +sha512sums=('SKIP' + 'f0d933e8c6064ed830dec54049b0a01e27be87203208f6ae982f10fb4eddc7258cb2919d594cbfb9a33e74c3510cfd682f3416ba8e804387ab87d1a217eb4b73' + '5a3cf61bb0b8da6061c13fbfce7191c545ccf4c95c5bbf3e47f2b41225f35a4a366e691a04f90b76fd24536ea4cb29ff24585408d4a9972cd0f1279544604abb' + 'fec639de0d99967ed3e67289eff5ff78fff0c5829d350e73bed536a8391f1daa1d118d72dbdc1f480ffd33fc22b72f4817d0973bd09ec7f182fd26ad87b24355' + '61032d29241b74a0f28446f8cf1be0e8ec46d0847a61dadb2a4f096e8686d5f57fe5c72bcf386003f6520bc4b5856c32d63bf3efe7eb0bc0deefc9f68159e648' + 'c416e2121df83067376bcaacb58c05b01990f4614ad9de657d74b6da3efa441af251d13bf21e3f0f71ddcb4c9ea658b81da3d915667dc5c309c87ec32a1cb5a5' + '5a1d78b5170da5abe3d18fdf9f2c3a4d78f15ba7d1ee9ec2708c4c9c2e28973469bc19386f70b3cf32ffafbe4fcc4303e5ebbd6d5187a1df3314ae0965b25e75' + '888ab01bc6e09beb08d7126472c34c9e1aa35ea34e62a09e900ae34c93b1de2fcc988586efd8d0dc962393974f45c77b206d59a86cf53e370f061bf9a1b1a862' + '89f9b2d3918c679ce4f76c2b10dc7fcb7e04f1925a5f92542f06891de2a123a91df7eb67fd4ce71506a8132f5440b3560b7bb667e1c1813944b115c1dfe35e3f' + 'b993a42c5534582631f7b379d54f6abc37e3aaa56ecf869a6d86ff14ae5a52628f4e447b6a30751bc1c14c30cec63a5c6d0aa268362d235ed477b639cac3a219') +validpgpkeys=( + '63CDA1E5D3FC22B998D20DD6327F26951A015CC4' # Lennart Poettering +) + +_backports=( +) + +_validate_tag() { + local success fingerprint trusted status tag=v$pkgver + + parse_gpg_statusfile /dev/stdin < <(git verify-tag --raw "$tag" 2>&1) + + if (( ! success )); then + error 'failed to validate tag %s\n' "$tag" + return 1 + fi + + if ! in_array "$fingerprint" "${validpgpkeys[@]}" && (( ! trusted )); then + error 'unknown or untrusted public key: %s\n' "$fingerprint" + return 1 + fi + + case $status in + 'expired') + warning 'the signature has expired' + ;; + 'expiredkey') + warning 'the key has expired' + ;; + esac + + return 0 +} + +prepare() { + cd "$pkgbase" + + _validate_tag || return + + if (( ${#_backports[*]} > 0 )); then + git cherry-pick -n "${_backports[@]}" + fi + + # these patches aren't upstream, but they make v232 more useable. + + # https://github.com/systemd/systemd/issues/4575 + patch -Np1 <../0001-disable-RestrictAddressFamilies-on-i686.patch + + # https://github.com/systemd/systemd/issues/4595 + # https://github.com/systemd/systemd/issues/3826 + patch -Np1 <../0001-Revert-nspawn-try-to-bind-mount-resolved-s-resolv.co.patch + + ./autogen.sh +} + +build() { + cd "$pkgbase" + + local timeservers=({0..3}.arch.pool.ntp.org) + + local configure_options=( + --libexecdir=/usr/lib + --localstatedir=/var + --sysconfdir=/etc + + --enable-lz4 + --enable-gnuefi + --disable-audit + --disable-ima + + --with-sysvinit-path= + --with-sysvrcnd-path= + --with-ntp-servers="${timeservers[*]}" + --with-default-dnssec=no + --with-dbuspolicydir=/usr/share/dbus-1/system.d + --without-kill-user-processes + ) + + ./configure "${configure_options[@]}" + + make +} + +package_systemd() { + pkgdesc="system and service manager" + license=('GPL2' 'LGPL2.1') + depends=('acl' 'bash' 'dbus' 'iptables' 'kbd' 'kmod' 'hwids' 'libcap' + 'libgcrypt' 'libsystemd' 'libidn' 'lz4' 'pam' 'libelf' 'libseccomp' + 'util-linux' 'xz') + provides=('nss-myhostname' "systemd-tools=$pkgver" "udev=$pkgver") + replaces=('nss-myhostname' 'systemd-tools' 'udev') + conflicts=('nss-myhostname' 'systemd-tools' 'udev') + optdepends=('cryptsetup: required for encrypted block devices' + 'libmicrohttpd: remote journald capabilities' + 'quota-tools: kernel-level quota management' + 'systemd-sysvcompat: symlink package to provide sysvinit binaries' + 'polkit: allow administration as unprivileged user') + backup=(etc/pam.d/systemd-user + etc/systemd/coredump.conf + etc/systemd/journald.conf + etc/systemd/journal-remote.conf + etc/systemd/journal-upload.conf + etc/systemd/logind.conf + etc/systemd/system.conf + etc/systemd/timesyncd.conf + etc/systemd/resolved.conf + etc/systemd/user.conf + etc/udev/udev.conf) + install="systemd.install" + + make -C "$pkgbase" DESTDIR="$pkgdir" install + + # don't write units to /etc by default. some of these will be re-enabled on + # post_install. + rm -r "$pkgdir/etc/systemd/system/"*.wants + + # get rid of RPM macros + rm -r "$pkgdir/usr/lib/rpm" + + # add back tmpfiles.d/legacy.conf + install -m644 "$pkgbase/tmpfiles.d/legacy.conf" "$pkgdir/usr/lib/tmpfiles.d" + + # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group + sed -i 's#GROUP="dialout"#GROUP="uucp"#g; + s#GROUP="tape"#GROUP="storage"#g; + s#GROUP="cdrom"#GROUP="optical"#g' "$pkgdir"/usr/lib/udev/rules.d/*.rules + sed -i 's/dialout/uucp/g; + s/tape/storage/g; + s/cdrom/optical/g' "$pkgdir"/usr/lib/sysusers.d/basic.conf + + # add mkinitcpio hooks + install -Dm644 "$srcdir/initcpio-install-systemd" "$pkgdir/usr/lib/initcpio/install/systemd" + install -Dm644 "$srcdir/initcpio-install-udev" "$pkgdir/usr/lib/initcpio/install/udev" + install -Dm644 "$srcdir/initcpio-hook-udev" "$pkgdir/usr/lib/initcpio/hooks/udev" + + # ensure proper permissions for /var/log/journal. This is only to placate + chown root:systemd-journal "$pkgdir/var/log/journal" + chmod 2755 "$pkgdir/var/log/journal" + + # we'll create this on installation + rmdir "$pkgdir/var/log/journal/remote" + + # fix pam file + sed 's|system-auth|system-login|g' -i "$pkgdir/etc/pam.d/systemd-user" + + # ship default policy to leave services disabled + echo 'disable *' >"$pkgdir"/usr/lib/systemd/system-preset/99-default.preset + + ### manpages shipped with systemd-sysvcompat + rm "$pkgdir"/usr/share/man/man8/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 + + ### runtime libraries shipped with libsystemd + rm "$pkgdir"/usr/lib/lib{nss,systemd,udev}*.so* + + # add example bootctl configuration + install -Dm644 "$srcdir/arch.conf" "$pkgdir"/usr/share/systemd/bootctl/arch.conf + install -Dm644 "$srcdir/loader.conf" "$pkgdir"/usr/share/systemd/bootctl/loader.conf + install -Dm644 "$srcdir/splash-arch.bmp" "$pkgdir"/usr/share/systemd/bootctl/splash-arch.bmp + + install -Dm644 "$srcdir/udev-hwdb.hook" "$pkgdir/usr/share/libalpm/hooks/udev-hwdb.hook" +} + +package_libsystemd() { + pkgdesc="systemd client libraries" + depends=('glibc' 'libcap' 'libgcrypt' 'lz4' 'xz') + license=('GPL2') + provides=('libsystemd.so' 'libudev.so') + + make -C "$pkgbase" DESTDIR="$pkgdir" install-rootlibLTLIBRARIES +} + +package_systemd-sysvcompat() { + pkgdesc="sysvinit compat for systemd" + license=('GPL2') + groups=('base') + conflicts=('sysvinit') + depends=('systemd') + + install -dm755 "$pkgdir"/usr/share/man/man8 + cp -d --no-preserve=ownership,timestamp \ + "$pkgbase"/man/{telinit,halt,reboot,poweroff,runlevel,shutdown}.8 \ + "$pkgdir"/usr/share/man/man8 + + install -dm755 "$pkgdir/usr/bin" + for tool in runlevel reboot shutdown poweroff halt telinit; do + ln -s 'systemctl' "$pkgdir/usr/bin/$tool" + done + + ln -s '../lib/systemd/systemd' "$pkgdir/usr/bin/init" +} + +# vim: ft=sh syn=sh et Deleted: testing-x86_64/arch.conf =================================================================== --- testing-x86_64/arch.conf 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/arch.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,7 +0,0 @@ -## This is just an example config file. -## Please edit the paths and kernel parameters according to your system. - -title Arch Linux -linux /vmlinuz-linux -initrd /initramfs-linux.img -options root=PARTUUID=XXXX rootfstype=XXXX add_efi_memmap Copied: systemd/repos/testing-x86_64/arch.conf (from rev 280260, systemd/trunk/arch.conf) =================================================================== --- testing-x86_64/arch.conf (rev 0) +++ testing-x86_64/arch.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,7 @@ +## This is just an example config file. +## Please edit the paths and kernel parameters according to your system. + +title Arch Linux +linux /vmlinuz-linux +initrd /initramfs-linux.img +options root=PARTUUID=XXXX rootfstype=XXXX add_efi_memmap Deleted: testing-x86_64/initcpio-hook-udev =================================================================== --- testing-x86_64/initcpio-hook-udev 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/initcpio-hook-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,22 +0,0 @@ -#!/usr/bin/ash - -run_earlyhook() { - kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf - systemd-tmpfiles --prefix=/dev --create --boot - /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never - udevd_running=1 -} - -run_hook() { - msg ":: Triggering uevents..." - udevadm trigger --action=add --type=subsystems - udevadm trigger --action=add --type=devices - udevadm settle -} - -run_cleanuphook() { - udevadm control --exit - udevadm info --cleanup-db -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-x86_64/initcpio-hook-udev (from rev 280260, systemd/trunk/initcpio-hook-udev) =================================================================== --- testing-x86_64/initcpio-hook-udev (rev 0) +++ testing-x86_64/initcpio-hook-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,22 @@ +#!/usr/bin/ash + +run_earlyhook() { + kmod static-nodes --format=tmpfiles --output=/run/tmpfiles.d/kmod.conf + systemd-tmpfiles --prefix=/dev --create --boot + /usr/lib/systemd/systemd-udevd --daemon --resolve-names=never + udevd_running=1 +} + +run_hook() { + msg ":: Triggering uevents..." + udevadm trigger --action=add --type=subsystems + udevadm trigger --action=add --type=devices + udevadm settle +} + +run_cleanuphook() { + udevadm control --exit + udevadm info --cleanup-db +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-x86_64/initcpio-install-systemd =================================================================== --- testing-x86_64/initcpio-install-systemd 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/initcpio-install-systemd 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,195 +0,0 @@ -#!/bin/bash - -strip_quotes() { - local len=${#1} quotes=$'[\'"]' str=${!1} - - if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then - printf -v "$1" %s "${str:1:-1}" - fi -} - -add_udev_rule() { - # Add an udev rules file to the initcpio image. Dependencies on binaries - # will be discovered and added. - # $1: path to rules file (or name of rules file) - - local rules= rule= key= value= binary= - - rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1") - if [[ -z $rules ]]; then - # complain about not found rules - return 1 - fi - - add_file "$rules" - - while IFS=, read -ra rule; do - # skip empty lines, comments - [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue - - for pair in "${rule[@]}"; do - IFS=' =' read -r key value <<< "$pair" - case $key in - RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD}) - strip_quotes 'value' - # just take the first word as the binary name - binary=${value%% *} - [[ ${binary:0:1} == '$' ]] && continue - if [[ ${binary:0:1} != '/' ]]; then - binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary") - fi - add_binary "$binary" - ;; - esac - done - done <"$rules" -} - -add_systemd_unit() { - # Add a systemd unit file to the initcpio image. Hard dependencies on binaries - # and other unit files will be discovered and added. - # $1: path to rules file (or name of rules file) - - local unit= rule= entry= key= value= binary= dep= - - unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1") - if [[ -z $unit ]]; then - # complain about not found unit file - return 1 - fi - - add_file "$unit" - - while IFS='=' read -r key values; do - read -ra values <<< "$values" - - case $key in - Requires|OnFailure) - # only add hard dependencies (not Wants) - map add_systemd_unit "${values[@]}" - ;; - Exec*) - # don't add binaries unless they are required - if [[ ${values[0]:0:1} != '-' ]]; then - add_binary "${values[0]}" - fi - ;; - esac - - done <"$unit" - - # preserve reverse soft dependency - for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do - if [[ -L $dep ]]; then - add_symlink "$dep" - fi - done - - # add hard dependencies - if [[ -d $unit.requires ]]; then - for dep in "$unit".requires/*; do - add_systemd_unit ${dep##*/} - done - fi -} - -add_systemd_drop_in() { - local unit=$1 dropin_name=$2 - - mkdir -p "$BUILDROOT/etc/systemd/system/$unit.d" - cat >"$BUILDROOT/etc/systemd/system/$unit.d/$2.conf" -} - -build() { - local rules unit - - # from base - add_binary /bin/mount - add_binary /usr/bin/kmod /usr/bin/modprobe - add_binary /usr/lib/systemd/systemd /init - add_binary /usr/bin/sulogin - - map add_binary \ - /usr/bin/systemd-tmpfiles \ - /usr/lib/systemd/systemd-hibernate-resume \ - /usr/lib/systemd/system-generators/systemd-fstab-generator \ - /usr/lib/systemd/system-generators/systemd-gpt-auto-generator \ - /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator - - # udev rules and systemd units - map add_udev_rule "$rules" \ - 50-udev-default.rules \ - 60-persistent-storage.rules \ - 64-btrfs.rules \ - 80-drivers.rules \ - 99-systemd.rules - - map add_systemd_unit \ - initrd-cleanup.service \ - initrd-fs.target \ - initrd-parse-etc.service \ - initrd-root-fs.target \ - initrd-root-device.target \ - initrd-switch-root.service \ - initrd-switch-root.target \ - initrd-udevadm-cleanup-db.service \ - initrd.target \ - kmod-static-nodes.service \ - local-fs.target \ - local-fs-pre.target \ - paths.target \ - reboot.target \ - slices.target \ - sockets.target \ - swap.target \ - systemd-fsck@.service \ - systemd-hibernate-resume@.service \ - systemd-journald.service \ - systemd-journald-audit.socket \ - systemd-journald-dev-log.socket \ - systemd-modules-load.service \ - systemd-tmpfiles-setup-dev.service \ - systemd-udev-trigger.service \ - systemd-udevd-control.socket \ - systemd-udevd-kernel.socket \ - systemd-udevd.service \ - timers.target \ - rescue.target \ - emergency.target - - add_symlink "/usr/lib/systemd/system/default.target" "initrd.target" - add_symlink "/usr/lib/systemd/system/ctrl-alt-del.target" "reboot.target" - - # udev wants /etc/group since it doesn't launch with --resolve-names=never - add_file "/etc/nsswitch.conf" - add_binary "$(readlink -f /usr/lib/libnss_files.so)" - - echo "root:x:0:0:root:/:/bin/sh" >"$BUILDROOT/etc/passwd" - echo "root:x:0:root" >"$BUILDROOT/etc/group" - echo "root::::::::" >"$BUILDROOT/etc/shadow" - - add_systemd_drop_in systemd-udevd.service resolve-names <<EOF -[Service] -ExecStart= -ExecStart=/usr/lib/systemd/systemd-udevd --resolve-names=never -EOF - - add_dir "/etc/modules-load.d" - ( - . "$_f_config" - set -f - printf "%s\n" $MODULES >"$BUILDROOT/etc/modules-load.d/MODULES.conf" - ) -} - -help() { - cat <<HELPEOF -This will install a basic systemd setup in your initramfs, and is meant to -replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime -components will need to be ported, and will not work as intended. You also may -wish to still include the 'base' hook (before this hook) to ensure that a -rescue shell exists on your initramfs. -HELPEOF -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-x86_64/initcpio-install-systemd (from rev 280260, systemd/trunk/initcpio-install-systemd) =================================================================== --- testing-x86_64/initcpio-install-systemd (rev 0) +++ testing-x86_64/initcpio-install-systemd 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,195 @@ +#!/bin/bash + +strip_quotes() { + local len=${#1} quotes=$'[\'"]' str=${!1} + + if [[ ${str:0:1} = ${str: -1} && ${str:0:1} = $quotes ]]; then + printf -v "$1" %s "${str:1:-1}" + fi +} + +add_udev_rule() { + # Add an udev rules file to the initcpio image. Dependencies on binaries + # will be discovered and added. + # $1: path to rules file (or name of rules file) + + local rules= rule= key= value= binary= + + rules=$(PATH=/usr/lib/udev/rules.d:/lib/udev/rules.d type -P "$1") + if [[ -z $rules ]]; then + # complain about not found rules + return 1 + fi + + add_file "$rules" + + while IFS=, read -ra rule; do + # skip empty lines, comments + [[ -z $rule || $rule = @(+([[:space:]])|#*) ]] && continue + + for pair in "${rule[@]}"; do + IFS=' =' read -r key value <<< "$pair" + case $key in + RUN@({program}|+)|IMPORT{program}|ENV{REMOVE_CMD}) + strip_quotes 'value' + # just take the first word as the binary name + binary=${value%% *} + [[ ${binary:0:1} == '$' ]] && continue + if [[ ${binary:0:1} != '/' ]]; then + binary=$(PATH=/usr/lib/udev:/lib/udev type -P "$binary") + fi + add_binary "$binary" + ;; + esac + done + done <"$rules" +} + +add_systemd_unit() { + # Add a systemd unit file to the initcpio image. Hard dependencies on binaries + # and other unit files will be discovered and added. + # $1: path to rules file (or name of rules file) + + local unit= rule= entry= key= value= binary= dep= + + unit=$(PATH=/usr/lib/systemd/system:/lib/systemd/system type -P "$1") + if [[ -z $unit ]]; then + # complain about not found unit file + return 1 + fi + + add_file "$unit" + + while IFS='=' read -r key values; do + read -ra values <<< "$values" + + case $key in + Requires|OnFailure) + # only add hard dependencies (not Wants) + map add_systemd_unit "${values[@]}" + ;; + Exec*) + # don't add binaries unless they are required + if [[ ${values[0]:0:1} != '-' ]]; then + add_binary "${values[0]}" + fi + ;; + esac + + done <"$unit" + + # preserve reverse soft dependency + for dep in {/usr,}/lib/systemd/system/*.wants/${unit##*/}; do + if [[ -L $dep ]]; then + add_symlink "$dep" + fi + done + + # add hard dependencies + if [[ -d $unit.requires ]]; then + for dep in "$unit".requires/*; do + add_systemd_unit ${dep##*/} + done + fi +} + +add_systemd_drop_in() { + local unit=$1 dropin_name=$2 + + mkdir -p "$BUILDROOT/etc/systemd/system/$unit.d" + cat >"$BUILDROOT/etc/systemd/system/$unit.d/$2.conf" +} + +build() { + local rules unit + + # from base + add_binary /bin/mount + add_binary /usr/bin/kmod /usr/bin/modprobe + add_binary /usr/lib/systemd/systemd /init + add_binary /usr/bin/sulogin + + map add_binary \ + /usr/bin/systemd-tmpfiles \ + /usr/lib/systemd/systemd-hibernate-resume \ + /usr/lib/systemd/system-generators/systemd-fstab-generator \ + /usr/lib/systemd/system-generators/systemd-gpt-auto-generator \ + /usr/lib/systemd/system-generators/systemd-hibernate-resume-generator + + # udev rules and systemd units + map add_udev_rule "$rules" \ + 50-udev-default.rules \ + 60-persistent-storage.rules \ + 64-btrfs.rules \ + 80-drivers.rules \ + 99-systemd.rules + + map add_systemd_unit \ + initrd-cleanup.service \ + initrd-fs.target \ + initrd-parse-etc.service \ + initrd-root-fs.target \ + initrd-root-device.target \ + initrd-switch-root.service \ + initrd-switch-root.target \ + initrd-udevadm-cleanup-db.service \ + initrd.target \ + kmod-static-nodes.service \ + local-fs.target \ + local-fs-pre.target \ + paths.target \ + reboot.target \ + slices.target \ + sockets.target \ + swap.target \ + systemd-fsck@.service \ + systemd-hibernate-resume@.service \ + systemd-journald.service \ + systemd-journald-audit.socket \ + systemd-journald-dev-log.socket \ + systemd-modules-load.service \ + systemd-tmpfiles-setup-dev.service \ + systemd-udev-trigger.service \ + systemd-udevd-control.socket \ + systemd-udevd-kernel.socket \ + systemd-udevd.service \ + timers.target \ + rescue.target \ + emergency.target + + add_symlink "/usr/lib/systemd/system/default.target" "initrd.target" + add_symlink "/usr/lib/systemd/system/ctrl-alt-del.target" "reboot.target" + + # udev wants /etc/group since it doesn't launch with --resolve-names=never + add_file "/etc/nsswitch.conf" + add_binary "$(readlink -f /usr/lib/libnss_files.so)" + + echo "root:x:0:0:root:/:/bin/sh" >"$BUILDROOT/etc/passwd" + echo "root:x:0:root" >"$BUILDROOT/etc/group" + echo "root::::::::" >"$BUILDROOT/etc/shadow" + + add_systemd_drop_in systemd-udevd.service resolve-names <<EOF +[Service] +ExecStart= +ExecStart=/usr/lib/systemd/systemd-udevd --resolve-names=never +EOF + + add_dir "/etc/modules-load.d" + ( + . "$_f_config" + set -f + printf "%s\n" $MODULES >"$BUILDROOT/etc/modules-load.d/MODULES.conf" + ) +} + +help() { + cat <<HELPEOF +This will install a basic systemd setup in your initramfs, and is meant to +replace the 'base', 'usr', 'udev' and 'timestamp' hooks. Other hooks with runtime +components will need to be ported, and will not work as intended. You also may +wish to still include the 'base' hook (before this hook) to ensure that a +rescue shell exists on your initramfs. +HELPEOF +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-x86_64/initcpio-install-udev =================================================================== --- testing-x86_64/initcpio-install-udev 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/initcpio-install-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,28 +0,0 @@ -#!/bin/bash - -build() { - local rules tool - - add_binary /usr/lib/systemd/systemd-udevd - add_binary /usr/bin/udevadm - add_binary /usr/bin/systemd-tmpfiles - - for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do - add_file "/usr/lib/udev/rules.d/$rules" - done - for tool in ata_id scsi_id; do - add_file "/usr/lib/udev/$tool" - done - - add_runscript -} - -help() { - cat <<HELPEOF -This hook will use udev to create your root device node and detect the needed -modules for your root device. It is also required for firmware loading in -initramfs. It is recommended to use this hook. -HELPEOF -} - -# vim: set ft=sh ts=4 sw=4 et: Copied: systemd/repos/testing-x86_64/initcpio-install-udev (from rev 280260, systemd/trunk/initcpio-install-udev) =================================================================== --- testing-x86_64/initcpio-install-udev (rev 0) +++ testing-x86_64/initcpio-install-udev 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,28 @@ +#!/bin/bash + +build() { + local rules tool + + add_binary /usr/lib/systemd/systemd-udevd + add_binary /usr/bin/udevadm + add_binary /usr/bin/systemd-tmpfiles + + for rules in 50-udev-default.rules 60-persistent-storage.rules 64-btrfs.rules 80-drivers.rules; do + add_file "/usr/lib/udev/rules.d/$rules" + done + for tool in ata_id scsi_id; do + add_file "/usr/lib/udev/$tool" + done + + add_runscript +} + +help() { + cat <<HELPEOF +This hook will use udev to create your root device node and detect the needed +modules for your root device. It is also required for firmware loading in +initramfs. It is recommended to use this hook. +HELPEOF +} + +# vim: set ft=sh ts=4 sw=4 et: Deleted: testing-x86_64/loader.conf =================================================================== --- testing-x86_64/loader.conf 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/loader.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -1 +0,0 @@ -default arch Copied: systemd/repos/testing-x86_64/loader.conf (from rev 280260, systemd/trunk/loader.conf) =================================================================== --- testing-x86_64/loader.conf (rev 0) +++ testing-x86_64/loader.conf 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1 @@ +default arch Deleted: testing-x86_64/splash-arch.bmp =================================================================== (Binary files differ) Copied: systemd/repos/testing-x86_64/splash-arch.bmp (from rev 280260, systemd/trunk/splash-arch.bmp) =================================================================== (Binary files differ) Deleted: testing-x86_64/systemd.install =================================================================== --- testing-x86_64/systemd.install 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/systemd.install 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,80 +0,0 @@ -#!/bin/bash - -sd_booted() { - [[ -d run/systemd/system && ! -L run/systemd/system ]] -} - -add_journal_acls() { - # ignore errors, since the filesystem might not support ACLs - setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx var/log/journal/ 2>/dev/null - : -} - -post_common() { - systemd-sysusers - journalctl --update-catalog -} - -_216_2_changes() { - echo ':: Coredumps are handled by systemd by default. Collection behavior can be' - echo ' tuned in /etc/systemd/coredump.conf.' -} - -_219_2_changes() { - if mkdir -m2755 var/log/journal/remote 2>/dev/null; then - chgrp systemd-journal-remote var/log/journal/remote - fi -} - -_219_4_changes() { - if ! systemctl is-enabled -q remote-fs.target; then - systemctl enable -q remote-fs.target - fi -} - -_230_1_changes() { - echo ':: systemd-bootchart is no longer included with systemd' -} - -post_install() { - systemd-machine-id-setup - - post_common "$@" - - add_journal_acls - - # enable some services by default, but don't track them - systemctl enable getty@tty1.service remote-fs.target - - echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your" - echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat" - - # group 'systemd-journal-remote' is created by systemd-sysusers - mkdir -m2755 var/log/journal/remote - chgrp systemd-journal-remote var/log/journal/remote -} - -post_upgrade() { - post_common "$@" - - # don't reexec if the old version is 231-1 or 231-2. - # https://github.com/systemd/systemd/commit/bd64d82c1c - if [[ $1 != 231-[12] ]] && sd_booted; then - systemctl --system daemon-reexec - fi - - local v upgrades=( - 216-2 - 219-2 - 219-4 - 230-1 - ) - - for v in "${upgrades[@]}"; do - if [[ $(vercmp "$v" "$2") -eq 1 ]]; then - "_${v//-/_}_changes" - fi - done -} - -# vim:set ts=2 sw=2 et: Copied: systemd/repos/testing-x86_64/systemd.install (from rev 280260, systemd/trunk/systemd.install) =================================================================== --- testing-x86_64/systemd.install (rev 0) +++ testing-x86_64/systemd.install 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,80 @@ +#!/bin/bash + +sd_booted() { + [[ -d run/systemd/system && ! -L run/systemd/system ]] +} + +add_journal_acls() { + # ignore errors, since the filesystem might not support ACLs + setfacl -Rnm g:wheel:rx,d:g:wheel:rx,g:adm:rx,d:g:adm:rx var/log/journal/ 2>/dev/null + : +} + +post_common() { + systemd-sysusers + journalctl --update-catalog +} + +_216_2_changes() { + echo ':: Coredumps are handled by systemd by default. Collection behavior can be' + echo ' tuned in /etc/systemd/coredump.conf.' +} + +_219_2_changes() { + if mkdir -m2755 var/log/journal/remote 2>/dev/null; then + chgrp systemd-journal-remote var/log/journal/remote + fi +} + +_219_4_changes() { + if ! systemctl is-enabled -q remote-fs.target; then + systemctl enable -q remote-fs.target + fi +} + +_230_1_changes() { + echo ':: systemd-bootchart is no longer included with systemd' +} + +post_install() { + systemd-machine-id-setup + + post_common "$@" + + add_journal_acls + + # enable some services by default, but don't track them + systemctl enable getty@tty1.service remote-fs.target + + echo ":: Append 'init=/usr/lib/systemd/systemd' to your kernel command line in your" + echo " bootloader to replace sysvinit with systemd, or install systemd-sysvcompat" + + # group 'systemd-journal-remote' is created by systemd-sysusers + mkdir -m2755 var/log/journal/remote + chgrp systemd-journal-remote var/log/journal/remote +} + +post_upgrade() { + post_common "$@" + + # don't reexec if the old version is 231-1 or 231-2. + # https://github.com/systemd/systemd/commit/bd64d82c1c + if [[ $1 != 231-[12] ]] && sd_booted; then + systemctl --system daemon-reexec + fi + + local v upgrades=( + 216-2 + 219-2 + 219-4 + 230-1 + ) + + for v in "${upgrades[@]}"; do + if [[ $(vercmp "$v" "$2") -eq 1 ]]; then + "_${v//-/_}_changes" + fi + done +} + +# vim:set ts=2 sw=2 et: Deleted: testing-x86_64/udev-hwdb.hook =================================================================== --- testing-x86_64/udev-hwdb.hook 2016-11-09 17:51:27 UTC (rev 280260) +++ testing-x86_64/udev-hwdb.hook 2016-11-09 17:52:39 UTC (rev 280261) @@ -1,11 +0,0 @@ -[Trigger] -Type = File -Operation = Install -Operation = Upgrade -Operation = Remove -Target = usr/lib/udev/hwdb.d/* - -[Action] -Description = Updating udev Hardware Database... -When = PostTransaction -Exec = /usr/bin/udevadm hwdb --update Copied: systemd/repos/testing-x86_64/udev-hwdb.hook (from rev 280260, systemd/trunk/udev-hwdb.hook) =================================================================== --- testing-x86_64/udev-hwdb.hook (rev 0) +++ testing-x86_64/udev-hwdb.hook 2016-11-09 17:52:39 UTC (rev 280261) @@ -0,0 +1,11 @@ +[Trigger] +Type = File +Operation = Install +Operation = Upgrade +Operation = Remove +Target = usr/lib/udev/hwdb.d/* + +[Action] +Description = Updating udev Hardware Database... +When = PostTransaction +Exec = /usr/bin/udevadm hwdb --update