Date: Thursday, March 1, 2012 @ 12:33:47
Author: tomegun
Revision: 151728
archrelease: copy trunk to testing-i686, testing-x86_64
Added:
udev/repos/testing-i686/
udev/repos/testing-i686/PKGBUILD
(from rev 151727, udev/trunk/PKGBUILD)
udev/repos/testing-i686/initcpio-hooks-udev
(from rev 151727, udev/trunk/initcpio-hooks-udev)
udev/repos/testing-i686/initcpio-install-udev
(from rev 151727, udev/trunk/initcpio-install-udev)
udev/repos/testing-i686/udev.install
(from rev 151727, udev/trunk/udev.install)
udev/repos/testing-x86_64/
udev/repos/testing-x86_64/PKGBUILD
(from rev 151727, udev/trunk/PKGBUILD)
udev/repos/testing-x86_64/initcpio-hooks-udev
(from rev 151727, udev/trunk/initcpio-hooks-udev)
udev/repos/testing-x86_64/initcpio-install-udev
(from rev 151727, udev/trunk/initcpio-install-udev)
udev/repos/testing-x86_64/udev.install
(from rev 151727, udev/trunk/udev.install)
--------------------------------------+
testing-i686/PKGBUILD | 62 +++++++++++++++++++++++++++++++++
testing-i686/initcpio-hooks-udev | 9 ++++
testing-i686/initcpio-install-udev | 26 +++++++++++++
testing-i686/udev.install | 59 +++++++++++++++++++++++++++++++
testing-x86_64/PKGBUILD | 62 +++++++++++++++++++++++++++++++++
testing-x86_64/initcpio-hooks-udev | 9 ++++
testing-x86_64/initcpio-install-udev | 26 +++++++++++++
testing-x86_64/udev.install | 59 +++++++++++++++++++++++++++++++
8 files changed, 312 insertions(+)
Copied: udev/repos/testing-i686/PKGBUILD (from rev 151727, udev/trunk/PKGBUILD)
===================================================================
--- testing-i686/PKGBUILD (rev 0)
+++ testing-i686/PKGBUILD 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,62 @@
+# $Id$
+# Maintainer: Tom Gundersen <t...@jklm.no>
+# Contributor: Aaron Griffin <aa...@archlinux.org>
+# Contributor: Tobias Powalowski <tp...@archlinux.org>
+# Contributor: Thomas Bächler <tho...@archlinux.org>
+
+pkgname=udev
+pkgver=181
+pkgrel=3
+pkgdesc="The userspace dev tools (udev)"
+depends=('util-linux' 'libusb-compat' 'glib2' 'kmod' 'pciutils' 'usbutils'
'pciutils' 'acl')
+install=udev.install
+arch=(i686 x86_64)
+license=('GPL')
+makedepends=('gobject-introspection' 'gperf' 'libxslt' 'usbutils' 'kmod')
+source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.xz
+ initcpio-hooks-udev
+ initcpio-install-udev)
+url="http://git.kernel.org/?p=linux/hotplug/udev.git;a=summary";
+backup=(etc/udev/udev.conf)
+groups=('base')
+options=(!makeflags !libtool)
+
+build() {
+ cd $srcdir/$pkgname-$pkgver
+
+ ./configure --prefix=/usr \
+ --with-rootprefix= \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib \
+ --libexecdir=/lib \
+ --with-systemdsystemunitdir=/lib/systemd/system \
+ --enable-udev_acl
+
+ make
+}
+
+package() {
+ cd $srcdir/$pkgname-$pkgver
+ make DESTDIR=${pkgdir} install
+
+ # udevd moved, symlink to make life easy for restarting udevd manually
+ ln -s ../../lib/udev/udevd ${pkgdir}/usr/bin/udevd
+
+ # the path to udevadm is hardcoded in some places
+ install -d ${pkgdir}/sbin
+ ln -s ../usr/bin/udevadm ${pkgdir}/sbin/udevadm
+
+ # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
+ for i in $pkgdir/lib/udev/rules.d/*.rules; do
+ sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g;
+ s#GROUP="tape"#GROUP="storage"#g;
+ s#GROUP="cdrom"#GROUP="optical"#g' $i
+ done
+
+ # install the mkinitpcio hook
+ install -D -m644 ../initcpio-hooks-udev ${pkgdir}/lib/initcpio/hooks/udev
+ install -D -m644 ../initcpio-install-udev ${pkgdir}/lib/initcpio/install/udev
+}
+md5sums=('0d7af750702620a871b9f9b98d8ad859'
+ 'a4dd853050bf2e0ae6b2e3d2c75499c2'
+ 'ee0bfe91a20fff12cc25ab1d1e024853')
Copied: udev/repos/testing-i686/initcpio-hooks-udev (from rev 151727,
udev/trunk/initcpio-hooks-udev)
===================================================================
--- testing-i686/initcpio-hooks-udev (rev 0)
+++ testing-i686/initcpio-hooks-udev 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,9 @@
+# vim: set ft=sh:
+run_hook ()
+{
+ msg -n ":: Triggering uevents..."
+ udevadm trigger --action=add --type=subsystems
+ udevadm trigger --action=add --type=devices
+ udevadm settle
+ msg "done."
+}
Copied: udev/repos/testing-i686/initcpio-install-udev (from rev 151727,
udev/trunk/initcpio-install-udev)
===================================================================
--- testing-i686/initcpio-install-udev (rev 0)
+++ testing-i686/initcpio-install-udev 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+build() {
+ FILES="/etc/udev/udev.conf"
+ SCRIPT="udev"
+
+ add_binary /lib/udev/udevd
+ add_binary /usr/bin/udevadm
+
+ for rules in 50-udev-default.rules 60-persistent-storage.rules
80-drivers.rules; do
+ add_file "/lib/udev/rules.d/$rules"
+ done
+ for tool in ata_id scsi_id; do
+ add_file "/lib/udev/$tool"
+ done
+}
+
+help() {
+ cat <<HELPEOF
+This hook will use udev to create your root device node and detect the needed
+modules for your root device. It is also required for firmware loading in
+initramfs. It is recommended to use this hook.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: udev/repos/testing-i686/udev.install (from rev 151727,
udev/trunk/udev.install)
===================================================================
--- testing-i686/udev.install (rev 0)
+++ testing-i686/udev.install 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,59 @@
+# arg 1: the new package version
+# arg 2: the old package version
+
+post_upgrade() {
+ if [ "$(vercmp $2 181-2)" -lt 0 ]; then
+ echo "udev changes:"
+ if [ "$(vercmp $2 168)" -lt 0 ]; then
+ echo " * Kernel 2.6.32 or newer is now required."
+ echo " * OSS emulation modules are not loaded by default, add to rc.conf
if needed."
+ echo " * Arch specific cd symlinks are now no longer created."
+ echo " * cd and net persistent rules will no longer be autogenerated,"
+ echo " see <https://wiki.archlinux.org/index.php/Udev> for details."
+ echo " * Errors are now logged (possibly to the console) by default."
+ fi
+ if [ "$(vercmp $2 171)" -lt 0 ]; then
+ echo " * Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD
and"
+ echo " blacklisting in MODULES no longer works."
+ echo " See 'man modprobe.conf' for a replacement to blacklisting."
+ echo " To disable a module mod1 on the kernel command line, use"
+ echo " mod1.disable=1"
+ echo " or"
+ echo " modprobe.blacklist=mod1"
+ echo " * The following modules are no longer unconditionally loaded:"
+ echo " pcspkr irtty-sir analog lp ppdev ide-generic"
+ echo " Add them to MODULES in rc.conf if you need them."
+ fi
+ if [ "$(vercmp $2 172)" -lt 0 ]; then
+ echo " * Blacklisting of framebuffer devices has moved from
/etc/modprobe.d to"
+ echo " /lib/modprobe.d. Any customizations shoud be done to the file
in /etc, as it"
+ echo " takes precedence."
+ echo " * kbd and rtc devices are no longer world readable."
+ echo " * rtc is no longer in the audio group and fb devices are no
longer in"
+ echo " the video group, as permissions and ownership of fb devices are
controlled"
+ echo " by X."
+ fi
+ if [ "$(vercmp $2 174)" -lt 0 ]; then
+ echo " * We now use upstream rules for assigning devices to the 'disk',
'optical',"
+ echo " 'scanner' and 'video' groups. Beware of any changes."
+ echo " * We no longer create symlinks from /dev/<dev> to /dev/<dev>0."
+ echo " * For security reasons, we no longer add devices to the 'storage'
group. Use"
+ echo " udisks and friends, or add custom rules to /etc/udev.d/rules/,
if you want"
+ echo " this functionality back."
+ echo " * We no longer create the static nodes on install needed for an
initrd-less"
+ echo " boot where devtmpfs is not mounted by the kernel, this only
affects fresh"
+ echo " installs."
+ fi
+ if [ "$(vercmp $2 175)" -lt 0 ]; then
+ echo " * devtmpfs support is now a hard requirement. Users of the
official Arch"
+ echo " kernels have this enabled."
+ fi
+ if [ "$(vercmp $2 181)" -lt 0 ]; then
+ echo " * udev-compat has been removed, and should be uninstalled."
+ echo " * Framebuffers are no longer blacklisted by default."
+ echo " * binaries moved from /sbin to /usr/bin"
+ fi
+ echo " * if your kernel does not provide /dev/loop-control, you need to
manually"
+ echo " load the 'loop' module before using losetup"
+ fi
+}
Copied: udev/repos/testing-x86_64/PKGBUILD (from rev 151727,
udev/trunk/PKGBUILD)
===================================================================
--- testing-x86_64/PKGBUILD (rev 0)
+++ testing-x86_64/PKGBUILD 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,62 @@
+# $Id$
+# Maintainer: Tom Gundersen <t...@jklm.no>
+# Contributor: Aaron Griffin <aa...@archlinux.org>
+# Contributor: Tobias Powalowski <tp...@archlinux.org>
+# Contributor: Thomas Bächler <tho...@archlinux.org>
+
+pkgname=udev
+pkgver=181
+pkgrel=3
+pkgdesc="The userspace dev tools (udev)"
+depends=('util-linux' 'libusb-compat' 'glib2' 'kmod' 'pciutils' 'usbutils'
'pciutils' 'acl')
+install=udev.install
+arch=(i686 x86_64)
+license=('GPL')
+makedepends=('gobject-introspection' 'gperf' 'libxslt' 'usbutils' 'kmod')
+source=(ftp://ftp.kernel.org/pub/linux/utils/kernel/hotplug/$pkgname-$pkgver.tar.xz
+ initcpio-hooks-udev
+ initcpio-install-udev)
+url="http://git.kernel.org/?p=linux/hotplug/udev.git;a=summary";
+backup=(etc/udev/udev.conf)
+groups=('base')
+options=(!makeflags !libtool)
+
+build() {
+ cd $srcdir/$pkgname-$pkgver
+
+ ./configure --prefix=/usr \
+ --with-rootprefix= \
+ --sysconfdir=/etc \
+ --libdir=/usr/lib \
+ --libexecdir=/lib \
+ --with-systemdsystemunitdir=/lib/systemd/system \
+ --enable-udev_acl
+
+ make
+}
+
+package() {
+ cd $srcdir/$pkgname-$pkgver
+ make DESTDIR=${pkgdir} install
+
+ # udevd moved, symlink to make life easy for restarting udevd manually
+ ln -s ../../lib/udev/udevd ${pkgdir}/usr/bin/udevd
+
+ # the path to udevadm is hardcoded in some places
+ install -d ${pkgdir}/sbin
+ ln -s ../usr/bin/udevadm ${pkgdir}/sbin/udevadm
+
+ # Replace dialout/tape/cdrom group in rules with uucp/storage/optical group
+ for i in $pkgdir/lib/udev/rules.d/*.rules; do
+ sed -i -e 's#GROUP="dialout"#GROUP="uucp"#g;
+ s#GROUP="tape"#GROUP="storage"#g;
+ s#GROUP="cdrom"#GROUP="optical"#g' $i
+ done
+
+ # install the mkinitpcio hook
+ install -D -m644 ../initcpio-hooks-udev ${pkgdir}/lib/initcpio/hooks/udev
+ install -D -m644 ../initcpio-install-udev ${pkgdir}/lib/initcpio/install/udev
+}
+md5sums=('0d7af750702620a871b9f9b98d8ad859'
+ 'a4dd853050bf2e0ae6b2e3d2c75499c2'
+ 'ee0bfe91a20fff12cc25ab1d1e024853')
Copied: udev/repos/testing-x86_64/initcpio-hooks-udev (from rev 151727,
udev/trunk/initcpio-hooks-udev)
===================================================================
--- testing-x86_64/initcpio-hooks-udev (rev 0)
+++ testing-x86_64/initcpio-hooks-udev 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,9 @@
+# vim: set ft=sh:
+run_hook ()
+{
+ msg -n ":: Triggering uevents..."
+ udevadm trigger --action=add --type=subsystems
+ udevadm trigger --action=add --type=devices
+ udevadm settle
+ msg "done."
+}
Copied: udev/repos/testing-x86_64/initcpio-install-udev (from rev 151727,
udev/trunk/initcpio-install-udev)
===================================================================
--- testing-x86_64/initcpio-install-udev (rev 0)
+++ testing-x86_64/initcpio-install-udev 2012-03-01 17:33:47 UTC (rev
151728)
@@ -0,0 +1,26 @@
+#!/bin/bash
+
+build() {
+ FILES="/etc/udev/udev.conf"
+ SCRIPT="udev"
+
+ add_binary /lib/udev/udevd
+ add_binary /usr/bin/udevadm
+
+ for rules in 50-udev-default.rules 60-persistent-storage.rules
80-drivers.rules; do
+ add_file "/lib/udev/rules.d/$rules"
+ done
+ for tool in ata_id scsi_id; do
+ add_file "/lib/udev/$tool"
+ done
+}
+
+help() {
+ cat <<HELPEOF
+This hook will use udev to create your root device node and detect the needed
+modules for your root device. It is also required for firmware loading in
+initramfs. It is recommended to use this hook.
+HELPEOF
+}
+
+# vim: set ft=sh ts=4 sw=4 et:
Copied: udev/repos/testing-x86_64/udev.install (from rev 151727,
udev/trunk/udev.install)
===================================================================
--- testing-x86_64/udev.install (rev 0)
+++ testing-x86_64/udev.install 2012-03-01 17:33:47 UTC (rev 151728)
@@ -0,0 +1,59 @@
+# arg 1: the new package version
+# arg 2: the old package version
+
+post_upgrade() {
+ if [ "$(vercmp $2 181-2)" -lt 0 ]; then
+ echo "udev changes:"
+ if [ "$(vercmp $2 168)" -lt 0 ]; then
+ echo " * Kernel 2.6.32 or newer is now required."
+ echo " * OSS emulation modules are not loaded by default, add to rc.conf
if needed."
+ echo " * Arch specific cd symlinks are now no longer created."
+ echo " * cd and net persistent rules will no longer be autogenerated,"
+ echo " see <https://wiki.archlinux.org/index.php/Udev> for details."
+ echo " * Errors are now logged (possibly to the console) by default."
+ fi
+ if [ "$(vercmp $2 171)" -lt 0 ]; then
+ echo " * Arch's custom blacklisting logic has been removed. MOD_AUTOLOAD
and"
+ echo " blacklisting in MODULES no longer works."
+ echo " See 'man modprobe.conf' for a replacement to blacklisting."
+ echo " To disable a module mod1 on the kernel command line, use"
+ echo " mod1.disable=1"
+ echo " or"
+ echo " modprobe.blacklist=mod1"
+ echo " * The following modules are no longer unconditionally loaded:"
+ echo " pcspkr irtty-sir analog lp ppdev ide-generic"
+ echo " Add them to MODULES in rc.conf if you need them."
+ fi
+ if [ "$(vercmp $2 172)" -lt 0 ]; then
+ echo " * Blacklisting of framebuffer devices has moved from
/etc/modprobe.d to"
+ echo " /lib/modprobe.d. Any customizations shoud be done to the file
in /etc, as it"
+ echo " takes precedence."
+ echo " * kbd and rtc devices are no longer world readable."
+ echo " * rtc is no longer in the audio group and fb devices are no
longer in"
+ echo " the video group, as permissions and ownership of fb devices are
controlled"
+ echo " by X."
+ fi
+ if [ "$(vercmp $2 174)" -lt 0 ]; then
+ echo " * We now use upstream rules for assigning devices to the 'disk',
'optical',"
+ echo " 'scanner' and 'video' groups. Beware of any changes."
+ echo " * We no longer create symlinks from /dev/<dev> to /dev/<dev>0."
+ echo " * For security reasons, we no longer add devices to the 'storage'
group. Use"
+ echo " udisks and friends, or add custom rules to /etc/udev.d/rules/,
if you want"
+ echo " this functionality back."
+ echo " * We no longer create the static nodes on install needed for an
initrd-less"
+ echo " boot where devtmpfs is not mounted by the kernel, this only
affects fresh"
+ echo " installs."
+ fi
+ if [ "$(vercmp $2 175)" -lt 0 ]; then
+ echo " * devtmpfs support is now a hard requirement. Users of the
official Arch"
+ echo " kernels have this enabled."
+ fi
+ if [ "$(vercmp $2 181)" -lt 0 ]; then
+ echo " * udev-compat has been removed, and should be uninstalled."
+ echo " * Framebuffers are no longer blacklisted by default."
+ echo " * binaries moved from /sbin to /usr/bin"
+ fi
+ echo " * if your kernel does not provide /dev/loop-control, you need to
manually"
+ echo " load the 'loop' module before using losetup"
+ fi
+}
