Date: Wednesday, March 21, 2012 @ 03:33:56 Author: ronald Revision: 153980
archrelease: copy trunk to testing-i686, testing-x86_64 Added: dhcpcd/repos/testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-Set-hostname-via-proc-if-file-is-available.patch) dhcpcd/repos/testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-set-MTU-via-sysfs-if-file-is-available.patch) dhcpcd/repos/testing-i686/PKGBUILD (from rev 153979, dhcpcd/trunk/PKGBUILD) dhcpcd/repos/testing-i686/dhcpcd.conf.d (from rev 153979, dhcpcd/trunk/dhcpcd.conf.d) dhcpcd/repos/testing-i686/remove_ifconfig.patch (from rev 153979, dhcpcd/trunk/remove_ifconfig.patch) dhcpcd/repos/testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-Set-hostname-via-proc-if-file-is-available.patch) dhcpcd/repos/testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-set-MTU-via-sysfs-if-file-is-available.patch) dhcpcd/repos/testing-x86_64/PKGBUILD (from rev 153979, dhcpcd/trunk/PKGBUILD) dhcpcd/repos/testing-x86_64/dhcpcd.conf.d (from rev 153979, dhcpcd/trunk/dhcpcd.conf.d) dhcpcd/repos/testing-x86_64/remove_ifconfig.patch (from rev 153979, dhcpcd/trunk/remove_ifconfig.patch) Deleted: dhcpcd/repos/testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch dhcpcd/repos/testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch dhcpcd/repos/testing-i686/PKGBUILD dhcpcd/repos/testing-i686/dhcpcd.conf.d dhcpcd/repos/testing-i686/remove_ifconfig.patch dhcpcd/repos/testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch dhcpcd/repos/testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch dhcpcd/repos/testing-x86_64/PKGBUILD dhcpcd/repos/testing-x86_64/dhcpcd.conf.d dhcpcd/repos/testing-x86_64/remove_ifconfig.patch ----------------------------------------------------------------------+ testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch | 66 ++--- testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch | 122 +++++----- testing-i686/PKGBUILD | 114 ++++----- testing-i686/dhcpcd.conf.d | 12 testing-i686/remove_ifconfig.patch | 40 +-- testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch | 66 ++--- testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch | 122 +++++----- testing-x86_64/PKGBUILD | 114 ++++----- testing-x86_64/dhcpcd.conf.d | 12 testing-x86_64/remove_ifconfig.patch | 40 +-- 10 files changed, 354 insertions(+), 354 deletions(-) Deleted: testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch =================================================================== --- testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,33 +0,0 @@ -From d345b36b483fec8fb2def5f3acdc2d3c5faa94eb Mon Sep 17 00:00:00 2001 -From: Dan McGee <d...@archlinux.org> -Date: Sun, 19 Jun 2011 16:04:25 -0500 -Subject: [PATCH] Set hostname via /proc if file is available - -On Linux, the hostname can be set via this file if available, precluding -the need for a `hostname` binary. - -Signed-off-by: Dan McGee <d...@archlinux.org> ---- - dhcpcd-hooks/30-hostname | 6 +++++- - 1 files changed, 5 insertions(+), 1 deletions(-) - -diff --git a/dhcpcd-hooks/30-hostname b/dhcpcd-hooks/30-hostname -index 65d1a13..af94262 100644 ---- a/dhcpcd-hooks/30-hostname -+++ b/dhcpcd-hooks/30-hostname -@@ -21,7 +21,11 @@ need_hostname() - try_hostname() - { - if valid_domainname "$1"; then -- hostname "$1" -+ if [ -w /proc/sys/kernel/hostname ]; then -+ echo "$1" > /proc/sys/kernel/hostname -+ else -+ hostname "$1" -+ fi - else - syslog err "Invalid hostname: $1" - fi --- -1.7.5.4 - Copied: dhcpcd/repos/testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-Set-hostname-via-proc-if-file-is-available.patch) =================================================================== --- testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch (rev 0) +++ testing-i686/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,33 @@ +From d345b36b483fec8fb2def5f3acdc2d3c5faa94eb Mon Sep 17 00:00:00 2001 +From: Dan McGee <d...@archlinux.org> +Date: Sun, 19 Jun 2011 16:04:25 -0500 +Subject: [PATCH] Set hostname via /proc if file is available + +On Linux, the hostname can be set via this file if available, precluding +the need for a `hostname` binary. + +Signed-off-by: Dan McGee <d...@archlinux.org> +--- + dhcpcd-hooks/30-hostname | 6 +++++- + 1 files changed, 5 insertions(+), 1 deletions(-) + +diff --git a/dhcpcd-hooks/30-hostname b/dhcpcd-hooks/30-hostname +index 65d1a13..af94262 100644 +--- a/dhcpcd-hooks/30-hostname ++++ b/dhcpcd-hooks/30-hostname +@@ -21,7 +21,11 @@ need_hostname() + try_hostname() + { + if valid_domainname "$1"; then +- hostname "$1" ++ if [ -w /proc/sys/kernel/hostname ]; then ++ echo "$1" > /proc/sys/kernel/hostname ++ else ++ hostname "$1" ++ fi + else + syslog err "Invalid hostname: $1" + fi +-- +1.7.5.4 + Deleted: testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch =================================================================== --- testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,61 +0,0 @@ -From 950c00d1b183796034d227ef47a90eb248d79b72 Mon Sep 17 00:00:00 2001 -From: Dave Reisner <d...@falconindy.com> -Date: Tue, 21 Jun 2011 09:32:47 -0400 -Subject: [PATCH] set MTU via sysfs if file is available - -On Linux, a network interface's MTU can be set by writing to -/sys/class/net/$interface/mtu, which removes the dependency on ifconfig. - -Signed-off-by: Dave Reisner <d...@falconindy.com> ---- - dhcpcd-hooks/10-mtu | 4 ++-- - dhcpcd-run-hooks.in | 11 +++++++++++ - 2 files changed, 13 insertions(+), 2 deletions(-) - -diff --git a/dhcpcd-hooks/10-mtu b/dhcpcd-hooks/10-mtu -index 639697c..8763930 100644 ---- a/dhcpcd-hooks/10-mtu -+++ b/dhcpcd-hooks/10-mtu -@@ -7,7 +7,7 @@ if [ "$reason" = PREINIT -a -e "$mtu_dir/$interface" ]; then - elif [ -n "$new_interface_mtu" ] && $if_up; then - # The smalled MTU dhcpcd can work with is 576 - if [ "$new_interface_mtu" -ge 576 ]; then -- if ifconfig "$interface" mtu "$new_interface_mtu"; then -+ if set_mtu "$interface" "$new_interface_mtu"; then - syslog info "$interface: MTU set to $new_interface_mtu" - # Save the MTU so we can restore it later - if [ ! -e "$mtu_dir/$interface" ]; then -@@ -21,7 +21,7 @@ elif [ -e "$mtu_dir/$interface" ]; then - # No MTU in this state, so restore the prior MTU - mtu=$(cat "$mtu_dir/$interface") - syslog info "$interface: MTU restored to $mtu" -- ifconfig "$interface" mtu "$mtu" -+ set_mtu "$interface" "$mtu" - rm "$mtu_dir/$interface" - fi - fi -diff --git a/dhcpcd-run-hooks.in b/dhcpcd-run-hooks.in -index 0e60338..843f3ca 100644 ---- a/dhcpcd-run-hooks.in -+++ b/dhcpcd-run-hooks.in -@@ -215,6 +215,17 @@ service_condcommand() - service_exists $1 && service_status $1 && service_cmd $1 $2 - } - -+# Set MTU for an interface -+set_mtu() { -+ local interface=$1 mtu=$2 -+ -+ if [ -e /sys/class/net/$interface/mtu ]; then -+ echo "$mtu" > /sys/class/net/$interface/mtu -+ else -+ ifconfig "$interface" mtu "$mtu" -+ fi -+} -+ - # We source each script into this one so that scripts run earlier can - # remove variables from the environment so later scripts don't see them. - # Thus, the user can create their dhcpcd.enter/exit-hook script to configure --- -1.7.5.4 - Copied: dhcpcd/repos/testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-set-MTU-via-sysfs-if-file-is-available.patch) =================================================================== --- testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch (rev 0) +++ testing-i686/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,61 @@ +From 950c00d1b183796034d227ef47a90eb248d79b72 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <d...@falconindy.com> +Date: Tue, 21 Jun 2011 09:32:47 -0400 +Subject: [PATCH] set MTU via sysfs if file is available + +On Linux, a network interface's MTU can be set by writing to +/sys/class/net/$interface/mtu, which removes the dependency on ifconfig. + +Signed-off-by: Dave Reisner <d...@falconindy.com> +--- + dhcpcd-hooks/10-mtu | 4 ++-- + dhcpcd-run-hooks.in | 11 +++++++++++ + 2 files changed, 13 insertions(+), 2 deletions(-) + +diff --git a/dhcpcd-hooks/10-mtu b/dhcpcd-hooks/10-mtu +index 639697c..8763930 100644 +--- a/dhcpcd-hooks/10-mtu ++++ b/dhcpcd-hooks/10-mtu +@@ -7,7 +7,7 @@ if [ "$reason" = PREINIT -a -e "$mtu_dir/$interface" ]; then + elif [ -n "$new_interface_mtu" ] && $if_up; then + # The smalled MTU dhcpcd can work with is 576 + if [ "$new_interface_mtu" -ge 576 ]; then +- if ifconfig "$interface" mtu "$new_interface_mtu"; then ++ if set_mtu "$interface" "$new_interface_mtu"; then + syslog info "$interface: MTU set to $new_interface_mtu" + # Save the MTU so we can restore it later + if [ ! -e "$mtu_dir/$interface" ]; then +@@ -21,7 +21,7 @@ elif [ -e "$mtu_dir/$interface" ]; then + # No MTU in this state, so restore the prior MTU + mtu=$(cat "$mtu_dir/$interface") + syslog info "$interface: MTU restored to $mtu" +- ifconfig "$interface" mtu "$mtu" ++ set_mtu "$interface" "$mtu" + rm "$mtu_dir/$interface" + fi + fi +diff --git a/dhcpcd-run-hooks.in b/dhcpcd-run-hooks.in +index 0e60338..843f3ca 100644 +--- a/dhcpcd-run-hooks.in ++++ b/dhcpcd-run-hooks.in +@@ -215,6 +215,17 @@ service_condcommand() + service_exists $1 && service_status $1 && service_cmd $1 $2 + } + ++# Set MTU for an interface ++set_mtu() { ++ local interface=$1 mtu=$2 ++ ++ if [ -e /sys/class/net/$interface/mtu ]; then ++ echo "$mtu" > /sys/class/net/$interface/mtu ++ else ++ ifconfig "$interface" mtu "$mtu" ++ fi ++} ++ + # We source each script into this one so that scripts run earlier can + # remove variables from the environment so later scripts don't see them. + # Thus, the user can create their dhcpcd.enter/exit-hook script to configure +-- +1.7.5.4 + Deleted: testing-i686/PKGBUILD =================================================================== --- testing-i686/PKGBUILD 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-i686/PKGBUILD 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,57 +0,0 @@ -# $Id$ -# Maintainer: Ronald van Haren <ronald.archlinux.org> -# Contributor: Tom Killian <tom.archlinux.org> -# Contributor: Judd Vinet <jvinet.zeroflux.org> - -_gitrev=8316b24 -pkgname=dhcpcd -pkgver=5.5.4 -pkgrel=2 -pkgdesc="RFC2131 compliant DHCP client daemon" -url="http://roy.marples.name/dhcpcd/" -arch=('i686' 'x86_64') -license=('BSD') -groups=('base') -depends=('glibc' 'sh') -backup=('etc/conf.d/dhcpcd' 'etc/dhcpcd.conf') -options=('emptydirs') # We Need the Empty /var/lib/dhcpcd Directory -#source=("http://roy.marples.name/downloads/$pkgname/$pkgname-$pkgver.tar.bz2" \ -source=("ftp://ftp.archlinux.org/other/dhcpcd/dhcpcd-r8316b24.tar.bz2" \ - 'dhcpcd.conf.d') -sha1sums=('1e3e47b2aabed38e81cd695d1f11527fd41b3637' - 'b67b9ce6a2faaca75fea356966a16be2283b7db0') - -build() { - cd ${srcdir}/${pkgname}-${pkgver} - - # remove net-tools dep (upstream now) -# patch -Np1 -i ${srcdir}/0001-Set-hostname-via-proc-if-file-is-available.patch -# patch -Np1 -i ${srcdir}/0001-set-MTU-via-sysfs-if-file-is-available.patch - - # configure variables - ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd \ - --rundir=/run - - # Build - make -} - -package() { - cd ${srcdir}/${pkgname}-${pkgver} - make DESTDIR=${pkgdir} install - - # Create Binary Symlink - install -d ${pkgdir}/usr/sbin - ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd - - # Install Configuration File used in /etc/rc.d/network - install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname - - # Install License - install -d $pkgdir/usr/share/licenses/$pkgname - awk '{if(FNR<27)print $0}' ${srcdir}/${pkgname}-${pkgver}/configure.h \ - >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE - - # Set Options in /etc/dhcpcd.conf - echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf # Disable ip4vall -} Copied: dhcpcd/repos/testing-i686/PKGBUILD (from rev 153979, dhcpcd/trunk/PKGBUILD) =================================================================== --- testing-i686/PKGBUILD (rev 0) +++ testing-i686/PKGBUILD 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,57 @@ +# $Id$ +# Maintainer: Ronald van Haren <ronald.archlinux.org> +# Contributor: Tom Killian <tom.archlinux.org> +# Contributor: Judd Vinet <jvinet.zeroflux.org> + +_gitrev=88e165b +pkgname=dhcpcd +pkgver=5.5.4 +pkgrel=3 +pkgdesc="RFC2131 compliant DHCP client daemon" +url="http://roy.marples.name/dhcpcd/" +arch=('i686' 'x86_64') +license=('BSD') +groups=('base') +depends=('glibc' 'sh') +backup=('etc/conf.d/dhcpcd' 'etc/dhcpcd.conf') +options=('emptydirs') # We Need the Empty /var/lib/dhcpcd Directory +#source=("http://roy.marples.name/downloads/$pkgname/$pkgname-$pkgver.tar.bz2" \ +source=("ftp://ftp.archlinux.org/other/dhcpcd/dhcpcd-r${_gitrev}.tar.bz2" \ + 'dhcpcd.conf.d') +sha1sums=('b0cb14d36b5867047ebed2f7f12aaee61981228b' + 'b67b9ce6a2faaca75fea356966a16be2283b7db0') + +build() { + cd ${srcdir}/${pkgname}-${pkgver} + + # remove net-tools dep (upstream now) +# patch -Np1 -i ${srcdir}/0001-Set-hostname-via-proc-if-file-is-available.patch +# patch -Np1 -i ${srcdir}/0001-set-MTU-via-sysfs-if-file-is-available.patch + + # configure variables + ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd \ + --rundir=/run + + # Build + make +} + +package() { + cd ${srcdir}/${pkgname}-${pkgver} + make DESTDIR=${pkgdir} install + + # Create Binary Symlink + install -d ${pkgdir}/usr/sbin + ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd + + # Install Configuration File used in /etc/rc.d/network + install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname + + # Install License + install -d $pkgdir/usr/share/licenses/$pkgname + awk '{if(FNR<27)print $0}' ${srcdir}/${pkgname}-${pkgver}/configure.h \ + >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE + + # Set Options in /etc/dhcpcd.conf + echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf # Disable ip4vall +} Deleted: testing-i686/dhcpcd.conf.d =================================================================== --- testing-i686/dhcpcd.conf.d 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-i686/dhcpcd.conf.d 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,6 +0,0 @@ -# -# Arguments to be passed to the DHCP client daemon -# - -DHCPCD_ARGS="-q" - Copied: dhcpcd/repos/testing-i686/dhcpcd.conf.d (from rev 153979, dhcpcd/trunk/dhcpcd.conf.d) =================================================================== --- testing-i686/dhcpcd.conf.d (rev 0) +++ testing-i686/dhcpcd.conf.d 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,6 @@ +# +# Arguments to be passed to the DHCP client daemon +# + +DHCPCD_ARGS="-q" + Deleted: testing-i686/remove_ifconfig.patch =================================================================== --- testing-i686/remove_ifconfig.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-i686/remove_ifconfig.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,20 +0,0 @@ ---- dhcpcd-hooks/10-mtu.orig 2011-11-04 07:45:46.477712667 +0100 -+++ dhcpcd-hooks/10-mtu 2011-11-04 07:46:38.964379550 +0100 -@@ -7,7 +7,7 @@ - elif [ -n "$new_interface_mtu" ] && $if_up; then - # The smalled MTU dhcpcd can work with is 576 - if [ "$new_interface_mtu" -ge 576 ]; then -- if ifconfig "$interface" mtu "$new_interface_mtu"; then -+ if ip link set "$interface" mtu "$new_interface_mtu"; then - syslog info "$interface: MTU set to $new_interface_mtu" - # Save the MTU so we can restore it later - if [ ! -e "$mtu_dir/$interface" ]; then -@@ -21,7 +21,7 @@ - # No MTU in this state, so restore the prior MTU - mtu=$(cat "$mtu_dir/$interface") - syslog info "$interface: MTU restored to $mtu" -- ifconfig "$interface" mtu "$mtu" -+ ip link set "$interface" mtu "$new_interface_mtu" - rm "$mtu_dir/$interface" - fi - fi Copied: dhcpcd/repos/testing-i686/remove_ifconfig.patch (from rev 153979, dhcpcd/trunk/remove_ifconfig.patch) =================================================================== --- testing-i686/remove_ifconfig.patch (rev 0) +++ testing-i686/remove_ifconfig.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,20 @@ +--- dhcpcd-hooks/10-mtu.orig 2011-11-04 07:45:46.477712667 +0100 ++++ dhcpcd-hooks/10-mtu 2011-11-04 07:46:38.964379550 +0100 +@@ -7,7 +7,7 @@ + elif [ -n "$new_interface_mtu" ] && $if_up; then + # The smalled MTU dhcpcd can work with is 576 + if [ "$new_interface_mtu" -ge 576 ]; then +- if ifconfig "$interface" mtu "$new_interface_mtu"; then ++ if ip link set "$interface" mtu "$new_interface_mtu"; then + syslog info "$interface: MTU set to $new_interface_mtu" + # Save the MTU so we can restore it later + if [ ! -e "$mtu_dir/$interface" ]; then +@@ -21,7 +21,7 @@ + # No MTU in this state, so restore the prior MTU + mtu=$(cat "$mtu_dir/$interface") + syslog info "$interface: MTU restored to $mtu" +- ifconfig "$interface" mtu "$mtu" ++ ip link set "$interface" mtu "$new_interface_mtu" + rm "$mtu_dir/$interface" + fi + fi Deleted: testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch =================================================================== --- testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,33 +0,0 @@ -From d345b36b483fec8fb2def5f3acdc2d3c5faa94eb Mon Sep 17 00:00:00 2001 -From: Dan McGee <d...@archlinux.org> -Date: Sun, 19 Jun 2011 16:04:25 -0500 -Subject: [PATCH] Set hostname via /proc if file is available - -On Linux, the hostname can be set via this file if available, precluding -the need for a `hostname` binary. - -Signed-off-by: Dan McGee <d...@archlinux.org> ---- - dhcpcd-hooks/30-hostname | 6 +++++- - 1 files changed, 5 insertions(+), 1 deletions(-) - -diff --git a/dhcpcd-hooks/30-hostname b/dhcpcd-hooks/30-hostname -index 65d1a13..af94262 100644 ---- a/dhcpcd-hooks/30-hostname -+++ b/dhcpcd-hooks/30-hostname -@@ -21,7 +21,11 @@ need_hostname() - try_hostname() - { - if valid_domainname "$1"; then -- hostname "$1" -+ if [ -w /proc/sys/kernel/hostname ]; then -+ echo "$1" > /proc/sys/kernel/hostname -+ else -+ hostname "$1" -+ fi - else - syslog err "Invalid hostname: $1" - fi --- -1.7.5.4 - Copied: dhcpcd/repos/testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-Set-hostname-via-proc-if-file-is-available.patch) =================================================================== --- testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch (rev 0) +++ testing-x86_64/0001-Set-hostname-via-proc-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,33 @@ +From d345b36b483fec8fb2def5f3acdc2d3c5faa94eb Mon Sep 17 00:00:00 2001 +From: Dan McGee <d...@archlinux.org> +Date: Sun, 19 Jun 2011 16:04:25 -0500 +Subject: [PATCH] Set hostname via /proc if file is available + +On Linux, the hostname can be set via this file if available, precluding +the need for a `hostname` binary. + +Signed-off-by: Dan McGee <d...@archlinux.org> +--- + dhcpcd-hooks/30-hostname | 6 +++++- + 1 files changed, 5 insertions(+), 1 deletions(-) + +diff --git a/dhcpcd-hooks/30-hostname b/dhcpcd-hooks/30-hostname +index 65d1a13..af94262 100644 +--- a/dhcpcd-hooks/30-hostname ++++ b/dhcpcd-hooks/30-hostname +@@ -21,7 +21,11 @@ need_hostname() + try_hostname() + { + if valid_domainname "$1"; then +- hostname "$1" ++ if [ -w /proc/sys/kernel/hostname ]; then ++ echo "$1" > /proc/sys/kernel/hostname ++ else ++ hostname "$1" ++ fi + else + syslog err "Invalid hostname: $1" + fi +-- +1.7.5.4 + Deleted: testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch =================================================================== --- testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,61 +0,0 @@ -From 950c00d1b183796034d227ef47a90eb248d79b72 Mon Sep 17 00:00:00 2001 -From: Dave Reisner <d...@falconindy.com> -Date: Tue, 21 Jun 2011 09:32:47 -0400 -Subject: [PATCH] set MTU via sysfs if file is available - -On Linux, a network interface's MTU can be set by writing to -/sys/class/net/$interface/mtu, which removes the dependency on ifconfig. - -Signed-off-by: Dave Reisner <d...@falconindy.com> ---- - dhcpcd-hooks/10-mtu | 4 ++-- - dhcpcd-run-hooks.in | 11 +++++++++++ - 2 files changed, 13 insertions(+), 2 deletions(-) - -diff --git a/dhcpcd-hooks/10-mtu b/dhcpcd-hooks/10-mtu -index 639697c..8763930 100644 ---- a/dhcpcd-hooks/10-mtu -+++ b/dhcpcd-hooks/10-mtu -@@ -7,7 +7,7 @@ if [ "$reason" = PREINIT -a -e "$mtu_dir/$interface" ]; then - elif [ -n "$new_interface_mtu" ] && $if_up; then - # The smalled MTU dhcpcd can work with is 576 - if [ "$new_interface_mtu" -ge 576 ]; then -- if ifconfig "$interface" mtu "$new_interface_mtu"; then -+ if set_mtu "$interface" "$new_interface_mtu"; then - syslog info "$interface: MTU set to $new_interface_mtu" - # Save the MTU so we can restore it later - if [ ! -e "$mtu_dir/$interface" ]; then -@@ -21,7 +21,7 @@ elif [ -e "$mtu_dir/$interface" ]; then - # No MTU in this state, so restore the prior MTU - mtu=$(cat "$mtu_dir/$interface") - syslog info "$interface: MTU restored to $mtu" -- ifconfig "$interface" mtu "$mtu" -+ set_mtu "$interface" "$mtu" - rm "$mtu_dir/$interface" - fi - fi -diff --git a/dhcpcd-run-hooks.in b/dhcpcd-run-hooks.in -index 0e60338..843f3ca 100644 ---- a/dhcpcd-run-hooks.in -+++ b/dhcpcd-run-hooks.in -@@ -215,6 +215,17 @@ service_condcommand() - service_exists $1 && service_status $1 && service_cmd $1 $2 - } - -+# Set MTU for an interface -+set_mtu() { -+ local interface=$1 mtu=$2 -+ -+ if [ -e /sys/class/net/$interface/mtu ]; then -+ echo "$mtu" > /sys/class/net/$interface/mtu -+ else -+ ifconfig "$interface" mtu "$mtu" -+ fi -+} -+ - # We source each script into this one so that scripts run earlier can - # remove variables from the environment so later scripts don't see them. - # Thus, the user can create their dhcpcd.enter/exit-hook script to configure --- -1.7.5.4 - Copied: dhcpcd/repos/testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch (from rev 153979, dhcpcd/trunk/0001-set-MTU-via-sysfs-if-file-is-available.patch) =================================================================== --- testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch (rev 0) +++ testing-x86_64/0001-set-MTU-via-sysfs-if-file-is-available.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,61 @@ +From 950c00d1b183796034d227ef47a90eb248d79b72 Mon Sep 17 00:00:00 2001 +From: Dave Reisner <d...@falconindy.com> +Date: Tue, 21 Jun 2011 09:32:47 -0400 +Subject: [PATCH] set MTU via sysfs if file is available + +On Linux, a network interface's MTU can be set by writing to +/sys/class/net/$interface/mtu, which removes the dependency on ifconfig. + +Signed-off-by: Dave Reisner <d...@falconindy.com> +--- + dhcpcd-hooks/10-mtu | 4 ++-- + dhcpcd-run-hooks.in | 11 +++++++++++ + 2 files changed, 13 insertions(+), 2 deletions(-) + +diff --git a/dhcpcd-hooks/10-mtu b/dhcpcd-hooks/10-mtu +index 639697c..8763930 100644 +--- a/dhcpcd-hooks/10-mtu ++++ b/dhcpcd-hooks/10-mtu +@@ -7,7 +7,7 @@ if [ "$reason" = PREINIT -a -e "$mtu_dir/$interface" ]; then + elif [ -n "$new_interface_mtu" ] && $if_up; then + # The smalled MTU dhcpcd can work with is 576 + if [ "$new_interface_mtu" -ge 576 ]; then +- if ifconfig "$interface" mtu "$new_interface_mtu"; then ++ if set_mtu "$interface" "$new_interface_mtu"; then + syslog info "$interface: MTU set to $new_interface_mtu" + # Save the MTU so we can restore it later + if [ ! -e "$mtu_dir/$interface" ]; then +@@ -21,7 +21,7 @@ elif [ -e "$mtu_dir/$interface" ]; then + # No MTU in this state, so restore the prior MTU + mtu=$(cat "$mtu_dir/$interface") + syslog info "$interface: MTU restored to $mtu" +- ifconfig "$interface" mtu "$mtu" ++ set_mtu "$interface" "$mtu" + rm "$mtu_dir/$interface" + fi + fi +diff --git a/dhcpcd-run-hooks.in b/dhcpcd-run-hooks.in +index 0e60338..843f3ca 100644 +--- a/dhcpcd-run-hooks.in ++++ b/dhcpcd-run-hooks.in +@@ -215,6 +215,17 @@ service_condcommand() + service_exists $1 && service_status $1 && service_cmd $1 $2 + } + ++# Set MTU for an interface ++set_mtu() { ++ local interface=$1 mtu=$2 ++ ++ if [ -e /sys/class/net/$interface/mtu ]; then ++ echo "$mtu" > /sys/class/net/$interface/mtu ++ else ++ ifconfig "$interface" mtu "$mtu" ++ fi ++} ++ + # We source each script into this one so that scripts run earlier can + # remove variables from the environment so later scripts don't see them. + # Thus, the user can create their dhcpcd.enter/exit-hook script to configure +-- +1.7.5.4 + Deleted: testing-x86_64/PKGBUILD =================================================================== --- testing-x86_64/PKGBUILD 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-x86_64/PKGBUILD 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,57 +0,0 @@ -# $Id$ -# Maintainer: Ronald van Haren <ronald.archlinux.org> -# Contributor: Tom Killian <tom.archlinux.org> -# Contributor: Judd Vinet <jvinet.zeroflux.org> - -_gitrev=8316b24 -pkgname=dhcpcd -pkgver=5.5.4 -pkgrel=2 -pkgdesc="RFC2131 compliant DHCP client daemon" -url="http://roy.marples.name/dhcpcd/" -arch=('i686' 'x86_64') -license=('BSD') -groups=('base') -depends=('glibc' 'sh') -backup=('etc/conf.d/dhcpcd' 'etc/dhcpcd.conf') -options=('emptydirs') # We Need the Empty /var/lib/dhcpcd Directory -#source=("http://roy.marples.name/downloads/$pkgname/$pkgname-$pkgver.tar.bz2" \ -source=("ftp://ftp.archlinux.org/other/dhcpcd/dhcpcd-r8316b24.tar.bz2" \ - 'dhcpcd.conf.d') -sha1sums=('1e3e47b2aabed38e81cd695d1f11527fd41b3637' - 'b67b9ce6a2faaca75fea356966a16be2283b7db0') - -build() { - cd ${srcdir}/${pkgname}-${pkgver} - - # remove net-tools dep (upstream now) -# patch -Np1 -i ${srcdir}/0001-Set-hostname-via-proc-if-file-is-available.patch -# patch -Np1 -i ${srcdir}/0001-set-MTU-via-sysfs-if-file-is-available.patch - - # configure variables - ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd \ - --rundir=/run - - # Build - make -} - -package() { - cd ${srcdir}/${pkgname}-${pkgver} - make DESTDIR=${pkgdir} install - - # Create Binary Symlink - install -d ${pkgdir}/usr/sbin - ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd - - # Install Configuration File used in /etc/rc.d/network - install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname - - # Install License - install -d $pkgdir/usr/share/licenses/$pkgname - awk '{if(FNR<27)print $0}' ${srcdir}/${pkgname}-${pkgver}/configure.h \ - >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE - - # Set Options in /etc/dhcpcd.conf - echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf # Disable ip4vall -} Copied: dhcpcd/repos/testing-x86_64/PKGBUILD (from rev 153979, dhcpcd/trunk/PKGBUILD) =================================================================== --- testing-x86_64/PKGBUILD (rev 0) +++ testing-x86_64/PKGBUILD 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,57 @@ +# $Id$ +# Maintainer: Ronald van Haren <ronald.archlinux.org> +# Contributor: Tom Killian <tom.archlinux.org> +# Contributor: Judd Vinet <jvinet.zeroflux.org> + +_gitrev=88e165b +pkgname=dhcpcd +pkgver=5.5.4 +pkgrel=3 +pkgdesc="RFC2131 compliant DHCP client daemon" +url="http://roy.marples.name/dhcpcd/" +arch=('i686' 'x86_64') +license=('BSD') +groups=('base') +depends=('glibc' 'sh') +backup=('etc/conf.d/dhcpcd' 'etc/dhcpcd.conf') +options=('emptydirs') # We Need the Empty /var/lib/dhcpcd Directory +#source=("http://roy.marples.name/downloads/$pkgname/$pkgname-$pkgver.tar.bz2" \ +source=("ftp://ftp.archlinux.org/other/dhcpcd/dhcpcd-r${_gitrev}.tar.bz2" \ + 'dhcpcd.conf.d') +sha1sums=('b0cb14d36b5867047ebed2f7f12aaee61981228b' + 'b67b9ce6a2faaca75fea356966a16be2283b7db0') + +build() { + cd ${srcdir}/${pkgname}-${pkgver} + + # remove net-tools dep (upstream now) +# patch -Np1 -i ${srcdir}/0001-Set-hostname-via-proc-if-file-is-available.patch +# patch -Np1 -i ${srcdir}/0001-set-MTU-via-sysfs-if-file-is-available.patch + + # configure variables + ./configure --libexecdir=/usr/lib/dhcpcd --dbdir=/var/lib/dhcpcd \ + --rundir=/run + + # Build + make +} + +package() { + cd ${srcdir}/${pkgname}-${pkgver} + make DESTDIR=${pkgdir} install + + # Create Binary Symlink + install -d ${pkgdir}/usr/sbin + ln -sf /sbin/dhcpcd ${pkgdir}/usr/sbin/dhcpcd + + # Install Configuration File used in /etc/rc.d/network + install -D -m644 ../dhcpcd.conf.d $pkgdir/etc/conf.d/$pkgname + + # Install License + install -d $pkgdir/usr/share/licenses/$pkgname + awk '{if(FNR<27)print $0}' ${srcdir}/${pkgname}-${pkgver}/configure.h \ + >> ${pkgdir}/usr/share/licenses/${pkgname}/LICENSE + + # Set Options in /etc/dhcpcd.conf + echo noipv4ll >> ${pkgdir}/etc/dhcpcd.conf # Disable ip4vall +} Deleted: testing-x86_64/dhcpcd.conf.d =================================================================== --- testing-x86_64/dhcpcd.conf.d 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-x86_64/dhcpcd.conf.d 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,6 +0,0 @@ -# -# Arguments to be passed to the DHCP client daemon -# - -DHCPCD_ARGS="-q" - Copied: dhcpcd/repos/testing-x86_64/dhcpcd.conf.d (from rev 153979, dhcpcd/trunk/dhcpcd.conf.d) =================================================================== --- testing-x86_64/dhcpcd.conf.d (rev 0) +++ testing-x86_64/dhcpcd.conf.d 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,6 @@ +# +# Arguments to be passed to the DHCP client daemon +# + +DHCPCD_ARGS="-q" + Deleted: testing-x86_64/remove_ifconfig.patch =================================================================== --- testing-x86_64/remove_ifconfig.patch 2012-03-21 07:33:01 UTC (rev 153979) +++ testing-x86_64/remove_ifconfig.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -1,20 +0,0 @@ ---- dhcpcd-hooks/10-mtu.orig 2011-11-04 07:45:46.477712667 +0100 -+++ dhcpcd-hooks/10-mtu 2011-11-04 07:46:38.964379550 +0100 -@@ -7,7 +7,7 @@ - elif [ -n "$new_interface_mtu" ] && $if_up; then - # The smalled MTU dhcpcd can work with is 576 - if [ "$new_interface_mtu" -ge 576 ]; then -- if ifconfig "$interface" mtu "$new_interface_mtu"; then -+ if ip link set "$interface" mtu "$new_interface_mtu"; then - syslog info "$interface: MTU set to $new_interface_mtu" - # Save the MTU so we can restore it later - if [ ! -e "$mtu_dir/$interface" ]; then -@@ -21,7 +21,7 @@ - # No MTU in this state, so restore the prior MTU - mtu=$(cat "$mtu_dir/$interface") - syslog info "$interface: MTU restored to $mtu" -- ifconfig "$interface" mtu "$mtu" -+ ip link set "$interface" mtu "$new_interface_mtu" - rm "$mtu_dir/$interface" - fi - fi Copied: dhcpcd/repos/testing-x86_64/remove_ifconfig.patch (from rev 153979, dhcpcd/trunk/remove_ifconfig.patch) =================================================================== --- testing-x86_64/remove_ifconfig.patch (rev 0) +++ testing-x86_64/remove_ifconfig.patch 2012-03-21 07:33:56 UTC (rev 153980) @@ -0,0 +1,20 @@ +--- dhcpcd-hooks/10-mtu.orig 2011-11-04 07:45:46.477712667 +0100 ++++ dhcpcd-hooks/10-mtu 2011-11-04 07:46:38.964379550 +0100 +@@ -7,7 +7,7 @@ + elif [ -n "$new_interface_mtu" ] && $if_up; then + # The smalled MTU dhcpcd can work with is 576 + if [ "$new_interface_mtu" -ge 576 ]; then +- if ifconfig "$interface" mtu "$new_interface_mtu"; then ++ if ip link set "$interface" mtu "$new_interface_mtu"; then + syslog info "$interface: MTU set to $new_interface_mtu" + # Save the MTU so we can restore it later + if [ ! -e "$mtu_dir/$interface" ]; then +@@ -21,7 +21,7 @@ + # No MTU in this state, so restore the prior MTU + mtu=$(cat "$mtu_dir/$interface") + syslog info "$interface: MTU restored to $mtu" +- ifconfig "$interface" mtu "$mtu" ++ ip link set "$interface" mtu "$new_interface_mtu" + rm "$mtu_dir/$interface" + fi + fi