Date: Saturday, April 7, 2012 @ 12:38:35 Author: dreisner Revision: 155849
archrelease: copy trunk to testing-i686, testing-x86_64 Added: pacman/repos/testing-i686/ pacman/repos/testing-i686/PKGBUILD (from rev 155848, pacman/trunk/PKGBUILD) pacman/repos/testing-i686/makepkg.conf (from rev 155848, pacman/trunk/makepkg.conf) pacman/repos/testing-i686/pacman.conf (from rev 155848, pacman/trunk/pacman.conf) pacman/repos/testing-i686/pacman.conf.x86_64 (from rev 155848, pacman/trunk/pacman.conf.x86_64) pacman/repos/testing-i686/pacman.install (from rev 155848, pacman/trunk/pacman.install) pacman/repos/testing-x86_64/ pacman/repos/testing-x86_64/PKGBUILD (from rev 155848, pacman/trunk/PKGBUILD) pacman/repos/testing-x86_64/makepkg.conf (from rev 155848, pacman/trunk/makepkg.conf) pacman/repos/testing-x86_64/pacman.conf (from rev 155848, pacman/trunk/pacman.conf) pacman/repos/testing-x86_64/pacman.conf.x86_64 (from rev 155848, pacman/trunk/pacman.conf.x86_64) pacman/repos/testing-x86_64/pacman.install (from rev 155848, pacman/trunk/pacman.install) -----------------------------------+ testing-i686/PKGBUILD | 77 ++++++++++++++++++++++ testing-i686/makepkg.conf | 121 ++++++++++++++++++++++++++++++++++++ testing-i686/pacman.conf | 100 +++++++++++++++++++++++++++++ testing-i686/pacman.conf.x86_64 | 111 +++++++++++++++++++++++++++++++++ testing-i686/pacman.install | 73 +++++++++++++++++++++ testing-x86_64/PKGBUILD | 77 ++++++++++++++++++++++ testing-x86_64/makepkg.conf | 121 ++++++++++++++++++++++++++++++++++++ testing-x86_64/pacman.conf | 100 +++++++++++++++++++++++++++++ testing-x86_64/pacman.conf.x86_64 | 111 +++++++++++++++++++++++++++++++++ testing-x86_64/pacman.install | 73 +++++++++++++++++++++ 10 files changed, 964 insertions(+) Copied: pacman/repos/testing-i686/PKGBUILD (from rev 155848, pacman/trunk/PKGBUILD) =================================================================== --- testing-i686/PKGBUILD (rev 0) +++ testing-i686/PKGBUILD 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,77 @@ +# vim: set ts=2 sw=2 et: +# $Id$ +# Maintainer: Dan McGee <d...@archlinux.org> +# Maintainer: Dave Reisner <dreis...@archlinux.org> + +pkgname=pacman +pkgver=4.0.3 +pkgrel=1 +pkgdesc="A library-based package manager with dependency support" +arch=('i686' 'x86_64') +url="http://www.archlinux.org/pacman/" +license=('GPL') +groups=('base') +depends=('bash' 'glibc>=2.15' 'libarchive>=3.0.2' 'curl>=7.19.4' + 'gpgme' 'pacman-mirrorlist') +makedepends=('asciidoc') +optdepends=('fakeroot: for makepkg usage as normal user') +backup=(etc/pacman.conf etc/makepkg.conf) +install=pacman.install +options=(!libtool) +source=(ftp://ftp.archlinux.org/other/pacman/$pkgname-$pkgver.tar.gz{,.sig} + pacman.conf + pacman.conf.x86_64 + makepkg.conf) +md5sums=('387965c7125e60e5f0b9ff3b427fe0f9' + '1a70392526c8768470da678b31905a6e' + '4605b3490d4fd1e5c6e20db17da9ded6' + 'a0edf98ad1845a4c7d902a86638d5d2d' + 'db051afbd12993b7743ccd4d58668499') + +build() { + cd $srcdir/$pkgname-$pkgver + + ./configure --prefix=/usr --sysconfdir=/etc \ + --localstatedir=/var --enable-doc + make +} + +check() { + make -C "$pkgname-$pkgver" check +} + +package() { + cd $srcdir/$pkgname-$pkgver + make DESTDIR=$pkgdir install + + # install Arch specific stuff + mkdir -p $pkgdir/etc + case "$CARCH" in + i686) + install -m644 $srcdir/pacman.conf $pkgdir/etc/pacman.conf + mycarch="i686" + mychost="i686-pc-linux-gnu" + myflags="-march=i686 " + ;; + x86_64) + install -m644 $srcdir/pacman.conf.x86_64 $pkgdir/etc/pacman.conf + mycarch="x86_64" + mychost="x86_64-unknown-linux-gnu" + myflags="-march=x86-64 " + ;; + esac + install -m644 $srcdir/makepkg.conf $pkgdir/etc/ + # set things correctly in the default conf file + sed -i $pkgdir/etc/makepkg.conf \ + -e "s|@CARCH[@]|$mycarch|g" \ + -e "s|@CHOST[@]|$mychost|g" \ + -e "s|@CARCHFLAGS[@]|$myflags|g" + + # install completion files + install -Dm644 contrib/bash_completion "$pkgdir/usr/share/bash-completion/completions/pacman" + for f in makepkg pacman-key; do + ln -s pacman "$pkgdir/usr/share/bash-completion/completions/$f" + done + + install -Dm644 contrib/zsh_completion $pkgdir/usr/share/zsh/site-functions/_pacman +} Copied: pacman/repos/testing-i686/makepkg.conf (from rev 155848, pacman/trunk/makepkg.conf) =================================================================== --- testing-i686/makepkg.conf (rev 0) +++ testing-i686/makepkg.conf 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,121 @@ +# +# /etc/makepkg.conf +# + +######################################################################### +# SOURCE ACQUISITION +######################################################################### +# +#-- The download utilities that makepkg should use to acquire sources +# Format: 'protocol::agent' +DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u' + 'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u' + 'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u' + 'rsync::/usr/bin/rsync -z %u %o' + 'scp::/usr/bin/scp -C %u %o') + +# Other common tools: +# /usr/bin/snarf +# /usr/bin/lftpget -c +# /usr/bin/wget + +######################################################################### +# ARCHITECTURE, COMPILE FLAGS +######################################################################### +# +CARCH="@CARCH@" +CHOST="@CHOST@" + +#-- Compiler and Linker Flags +# -march (or -mcpu) builds exclusively for an architecture +# -mtune optimizes for an architecture, but builds for whole processor family +CFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2" +CXXFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2" +LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu" +#-- Make Flags: change this for DistCC/SMP systems +#MAKEFLAGS="-j2" + +######################################################################### +# BUILD ENVIRONMENT +######################################################################### +# +# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign) +# A negated environment option will do the opposite of the comments below. +# +#-- fakeroot: Allow building packages as a non-root user +#-- distcc: Use the Distributed C/C++/ObjC compiler +#-- color: Colorize output messages +#-- ccache: Use ccache to cache compilation +#-- check: Run the check() function if present in the PKGBUILD +#-- sign: Generate PGP signature file +# +BUILDENV=(fakeroot !distcc color !ccache check !sign) +# +#-- If using DistCC, your MAKEFLAGS will also need modification. In addition, +#-- specify a space-delimited list of hosts running in the DistCC cluster. +#DISTCC_HOSTS="" +# +#-- Specify a directory for package building. +#BUILDDIR=/tmp/makepkg + +######################################################################### +# GLOBAL PACKAGE OPTIONS +# These are default values for the options=() settings +######################################################################### +# +# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx) +# A negated option will do the opposite of the comments below. +# +#-- strip: Strip symbols from binaries/libraries +#-- docs: Save doc directories specified by DOC_DIRS +#-- libtool: Leave libtool (.la) files in packages +#-- emptydirs: Leave empty directories in packages +#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip +#-- purge: Remove files specified by PURGE_TARGETS +#-- upx: Compress binary executable files using UPX +# +OPTIONS=(strip docs libtool emptydirs zipman purge !upx) + +#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512 +INTEGRITY_CHECK=(md5) +#-- Options to be used when stripping binaries. See `man strip' for details. +STRIP_BINARIES="--strip-all" +#-- Options to be used when stripping shared libraries. See `man strip' for details. +STRIP_SHARED="--strip-unneeded" +#-- Options to be used when stripping static libraries. See `man strip' for details. +STRIP_STATIC="--strip-debug" +#-- Manual (man and info) directories to compress (if zipman is specified) +MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info}) +#-- Doc directories to remove (if !docs is specified) +DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc}) +#-- Files to be removed from all packages (if purge is specified) +PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod) + +######################################################################### +# PACKAGE OUTPUT +######################################################################### +# +# Default: put built package and cached source in build directory +# +#-- Destination: specify a fixed directory where all packages will be placed +#PKGDEST=/home/packages +#-- Source cache: specify a fixed directory where source files will be cached +#SRCDEST=/home/sources +#-- Source packages: specify a fixed directory where all src packages will be placed +#SRCPKGDEST=/home/srcpackages +#-- Packager: name/email of the person or organization building packages +#PACKAGER="John Doe <j...@doe.com>" +#-- Specify a key to use for package signing +#GPGKEY="" + +######################################################################### +# EXTENSION DEFAULTS +######################################################################### +# +# WARNING: Do NOT modify these variables unless you know what you are +# doing. +# +PKGEXT='.pkg.tar.xz' +SRCEXT='.src.tar.gz' + +# vim: set ft=sh ts=2 sw=2 et: Copied: pacman/repos/testing-i686/pacman.conf (from rev 155848, pacman/trunk/pacman.conf) =================================================================== --- testing-i686/pacman.conf (rev 0) +++ testing-i686/pacman.conf 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,100 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +# If upgrades are available for these packages they will be asked for first +SyncFirst = pacman +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +#UseDelta +#TotalDownload +CheckSpace +#VerbosePkgLists + +# PGP signature checking +# NOTE: None of this will work without running `pacman-key --init` first. +# The compiled in default is equivalent to the following line. This requires +# you to locally sign and trust packager keys using `pacman-key` for them to be +# considered valid. +#SigLevel = Optional TrustedOnly +# If you wish to check signatures but avoid local sign and trust issues, use +# the following line. This will treat any key imported into pacman's keyring as +# trusted. +#SigLevel = Optional TrustAll +# For now, off by default unless you read the above. +SigLevel = Never + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[core] +#SigLevel = PackageRequired +Include = /etc/pacman.d/mirrorlist + +[extra] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[community] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + Copied: pacman/repos/testing-i686/pacman.conf.x86_64 (from rev 155848, pacman/trunk/pacman.conf.x86_64) =================================================================== --- testing-i686/pacman.conf.x86_64 (rev 0) +++ testing-i686/pacman.conf.x86_64 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,111 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +# If upgrades are available for these packages they will be asked for first +SyncFirst = pacman +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +#UseDelta +#TotalDownload +CheckSpace +#VerbosePkgLists + +# PGP signature checking +# NOTE: None of this will work without running `pacman-key --init` first. +# The compiled in default is equivalent to the following line. This requires +# you to locally sign and trust packager keys using `pacman-key` for them to be +# considered valid. +#SigLevel = Optional TrustedOnly +# If you wish to check signatures but avoid local sign and trust issues, use +# the following line. This will treat any key imported into pacman's keyring as +# trusted. +#SigLevel = Optional TrustAll +# For now, off by default unless you read the above. +SigLevel = Never + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[core] +#SigLevel = PackageRequired +Include = /etc/pacman.d/mirrorlist + +[extra] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[community] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the multilib repositories as required here. + +#[multilib-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +#[multilib] +#SigLevel = PackageOptional +#Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + Copied: pacman/repos/testing-i686/pacman.install (from rev 155848, pacman/trunk/pacman.install) =================================================================== --- testing-i686/pacman.install (rev 0) +++ testing-i686/pacman.install 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,73 @@ +#!/bin/sh +# arg 1: the new package version +# arg 2: the old package version +post_upgrade() { + # one time stuff for md5sum issue with older pacman versions + if [ "$(vercmp $2 3.0.2)" -lt 0 ]; then + _resetbackups + fi + if [ "$(vercmp $2 3.5.0)" -lt 0 ]; then + _warnupgrade + fi + _check_pubring +} + +post_install() { + _check_pubring +} + +_check_pubring() { + if [ ! -f "etc/pacman.d/gnupg/pubring.gpg" ]; then + echo " >>> Run \`pacman-key --init\` to set up your pacman keyring." + fi +} + +_warnupgrade() { + echo ">>> The pacman database format has changed as of pacman 3.5.0." + echo ">>> You will need to run \`pacman-db-upgrade\` as root." + echo ">>>" +} + +_resetbackups() { + echo ">>> Performing one-time reset of NoUpgrade md5sums. After this reset" + echo ">>> you are able to remove all NoUpgrade lines of already protected" + echo ">>> files from pacman.conf." + echo ">>>" + + # path variables + pacconf="/etc/pacman.conf" + dbpath="/var/lib/pacman/local" + + # get a list of NoUpgrade files from the user's pacman.conf + echo ">>> Retrieving pacman.conf NoUpgrade list..." + config=$(grep "^NoUpgrade" $pacconf | cut -d'=' -f2) + # add the standard list of files, even if they are already above + config="$config \ + etc/passwd etc/group etc/shadow etc/sudoers \ + etc/fstab etc/raidtab etc/ld.so.conf \ + etc/rc.conf etc/rc.local \ + etc/modprobe.conf etc/modules.conf \ + etc/lilo.conf boot/grub/menu.lst" + + # blank md5sum for use in sed expression + zeroes='00000000000000000000000000000000' + + for file in $config; do + echo ">>> -> finding owner of /$file..." + line=$(LC_ALL=C LANG=C pacman -Qo /$file 2>/dev/null) + # if file is owned by a package, go find its incorrectly stored sum + if [ ! -z "$line" ]; then + # get the name and version of the package owning file + name=$(echo $line | awk '{print $5}') + version=$(echo $line | awk '{print $6}') + # set the path to the backup array holding the md5sum + path="$dbpath/$name-$version/files" + # run a sed on the path to reset the line containing $file + # NOTE: literal tab characters in sed expression after $file + echo ">>> -> resetting sum of /$file..." + sed -i "s#$file [0-9a-fA-F]*#$file $zeroes#" $path + else + echo ">>> -> $file is unowned." + fi + done +} Copied: pacman/repos/testing-x86_64/PKGBUILD (from rev 155848, pacman/trunk/PKGBUILD) =================================================================== --- testing-x86_64/PKGBUILD (rev 0) +++ testing-x86_64/PKGBUILD 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,77 @@ +# vim: set ts=2 sw=2 et: +# $Id$ +# Maintainer: Dan McGee <d...@archlinux.org> +# Maintainer: Dave Reisner <dreis...@archlinux.org> + +pkgname=pacman +pkgver=4.0.3 +pkgrel=1 +pkgdesc="A library-based package manager with dependency support" +arch=('i686' 'x86_64') +url="http://www.archlinux.org/pacman/" +license=('GPL') +groups=('base') +depends=('bash' 'glibc>=2.15' 'libarchive>=3.0.2' 'curl>=7.19.4' + 'gpgme' 'pacman-mirrorlist') +makedepends=('asciidoc') +optdepends=('fakeroot: for makepkg usage as normal user') +backup=(etc/pacman.conf etc/makepkg.conf) +install=pacman.install +options=(!libtool) +source=(ftp://ftp.archlinux.org/other/pacman/$pkgname-$pkgver.tar.gz{,.sig} + pacman.conf + pacman.conf.x86_64 + makepkg.conf) +md5sums=('387965c7125e60e5f0b9ff3b427fe0f9' + '1a70392526c8768470da678b31905a6e' + '4605b3490d4fd1e5c6e20db17da9ded6' + 'a0edf98ad1845a4c7d902a86638d5d2d' + 'db051afbd12993b7743ccd4d58668499') + +build() { + cd $srcdir/$pkgname-$pkgver + + ./configure --prefix=/usr --sysconfdir=/etc \ + --localstatedir=/var --enable-doc + make +} + +check() { + make -C "$pkgname-$pkgver" check +} + +package() { + cd $srcdir/$pkgname-$pkgver + make DESTDIR=$pkgdir install + + # install Arch specific stuff + mkdir -p $pkgdir/etc + case "$CARCH" in + i686) + install -m644 $srcdir/pacman.conf $pkgdir/etc/pacman.conf + mycarch="i686" + mychost="i686-pc-linux-gnu" + myflags="-march=i686 " + ;; + x86_64) + install -m644 $srcdir/pacman.conf.x86_64 $pkgdir/etc/pacman.conf + mycarch="x86_64" + mychost="x86_64-unknown-linux-gnu" + myflags="-march=x86-64 " + ;; + esac + install -m644 $srcdir/makepkg.conf $pkgdir/etc/ + # set things correctly in the default conf file + sed -i $pkgdir/etc/makepkg.conf \ + -e "s|@CARCH[@]|$mycarch|g" \ + -e "s|@CHOST[@]|$mychost|g" \ + -e "s|@CARCHFLAGS[@]|$myflags|g" + + # install completion files + install -Dm644 contrib/bash_completion "$pkgdir/usr/share/bash-completion/completions/pacman" + for f in makepkg pacman-key; do + ln -s pacman "$pkgdir/usr/share/bash-completion/completions/$f" + done + + install -Dm644 contrib/zsh_completion $pkgdir/usr/share/zsh/site-functions/_pacman +} Copied: pacman/repos/testing-x86_64/makepkg.conf (from rev 155848, pacman/trunk/makepkg.conf) =================================================================== --- testing-x86_64/makepkg.conf (rev 0) +++ testing-x86_64/makepkg.conf 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,121 @@ +# +# /etc/makepkg.conf +# + +######################################################################### +# SOURCE ACQUISITION +######################################################################### +# +#-- The download utilities that makepkg should use to acquire sources +# Format: 'protocol::agent' +DLAGENTS=('ftp::/usr/bin/curl -fC - --ftp-pasv --retry 3 --retry-delay 3 -o %o %u' + 'http::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u' + 'https::/usr/bin/curl -fLC - --retry 3 --retry-delay 3 -o %o %u' + 'rsync::/usr/bin/rsync -z %u %o' + 'scp::/usr/bin/scp -C %u %o') + +# Other common tools: +# /usr/bin/snarf +# /usr/bin/lftpget -c +# /usr/bin/wget + +######################################################################### +# ARCHITECTURE, COMPILE FLAGS +######################################################################### +# +CARCH="@CARCH@" +CHOST="@CHOST@" + +#-- Compiler and Linker Flags +# -march (or -mcpu) builds exclusively for an architecture +# -mtune optimizes for an architecture, but builds for whole processor family +CFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2" +CXXFLAGS="@CARCHFLAGS@-mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2" +LDFLAGS="-Wl,-O1,--sort-common,--as-needed,-z,relro,--hash-style=gnu" +#-- Make Flags: change this for DistCC/SMP systems +#MAKEFLAGS="-j2" + +######################################################################### +# BUILD ENVIRONMENT +######################################################################### +# +# Defaults: BUILDENV=(fakeroot !distcc color !ccache check !sign) +# A negated environment option will do the opposite of the comments below. +# +#-- fakeroot: Allow building packages as a non-root user +#-- distcc: Use the Distributed C/C++/ObjC compiler +#-- color: Colorize output messages +#-- ccache: Use ccache to cache compilation +#-- check: Run the check() function if present in the PKGBUILD +#-- sign: Generate PGP signature file +# +BUILDENV=(fakeroot !distcc color !ccache check !sign) +# +#-- If using DistCC, your MAKEFLAGS will also need modification. In addition, +#-- specify a space-delimited list of hosts running in the DistCC cluster. +#DISTCC_HOSTS="" +# +#-- Specify a directory for package building. +#BUILDDIR=/tmp/makepkg + +######################################################################### +# GLOBAL PACKAGE OPTIONS +# These are default values for the options=() settings +######################################################################### +# +# Default: OPTIONS=(strip docs libtool emptydirs zipman purge !upx) +# A negated option will do the opposite of the comments below. +# +#-- strip: Strip symbols from binaries/libraries +#-- docs: Save doc directories specified by DOC_DIRS +#-- libtool: Leave libtool (.la) files in packages +#-- emptydirs: Leave empty directories in packages +#-- zipman: Compress manual (man and info) pages in MAN_DIRS with gzip +#-- purge: Remove files specified by PURGE_TARGETS +#-- upx: Compress binary executable files using UPX +# +OPTIONS=(strip docs libtool emptydirs zipman purge !upx) + +#-- File integrity checks to use. Valid: md5, sha1, sha256, sha384, sha512 +INTEGRITY_CHECK=(md5) +#-- Options to be used when stripping binaries. See `man strip' for details. +STRIP_BINARIES="--strip-all" +#-- Options to be used when stripping shared libraries. See `man strip' for details. +STRIP_SHARED="--strip-unneeded" +#-- Options to be used when stripping static libraries. See `man strip' for details. +STRIP_STATIC="--strip-debug" +#-- Manual (man and info) directories to compress (if zipman is specified) +MAN_DIRS=({usr{,/local}{,/share},opt/*}/{man,info}) +#-- Doc directories to remove (if !docs is specified) +DOC_DIRS=(usr/{,local/}{,share/}{doc,gtk-doc} opt/*/{doc,gtk-doc}) +#-- Files to be removed from all packages (if purge is specified) +PURGE_TARGETS=(usr/{,share}/info/dir .packlist *.pod) + +######################################################################### +# PACKAGE OUTPUT +######################################################################### +# +# Default: put built package and cached source in build directory +# +#-- Destination: specify a fixed directory where all packages will be placed +#PKGDEST=/home/packages +#-- Source cache: specify a fixed directory where source files will be cached +#SRCDEST=/home/sources +#-- Source packages: specify a fixed directory where all src packages will be placed +#SRCPKGDEST=/home/srcpackages +#-- Packager: name/email of the person or organization building packages +#PACKAGER="John Doe <j...@doe.com>" +#-- Specify a key to use for package signing +#GPGKEY="" + +######################################################################### +# EXTENSION DEFAULTS +######################################################################### +# +# WARNING: Do NOT modify these variables unless you know what you are +# doing. +# +PKGEXT='.pkg.tar.xz' +SRCEXT='.src.tar.gz' + +# vim: set ft=sh ts=2 sw=2 et: Copied: pacman/repos/testing-x86_64/pacman.conf (from rev 155848, pacman/trunk/pacman.conf) =================================================================== --- testing-x86_64/pacman.conf (rev 0) +++ testing-x86_64/pacman.conf 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,100 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +# If upgrades are available for these packages they will be asked for first +SyncFirst = pacman +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +#UseDelta +#TotalDownload +CheckSpace +#VerbosePkgLists + +# PGP signature checking +# NOTE: None of this will work without running `pacman-key --init` first. +# The compiled in default is equivalent to the following line. This requires +# you to locally sign and trust packager keys using `pacman-key` for them to be +# considered valid. +#SigLevel = Optional TrustedOnly +# If you wish to check signatures but avoid local sign and trust issues, use +# the following line. This will treat any key imported into pacman's keyring as +# trusted. +#SigLevel = Optional TrustAll +# For now, off by default unless you read the above. +SigLevel = Never + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[core] +#SigLevel = PackageRequired +Include = /etc/pacman.d/mirrorlist + +[extra] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[community] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + Copied: pacman/repos/testing-x86_64/pacman.conf.x86_64 (from rev 155848, pacman/trunk/pacman.conf.x86_64) =================================================================== --- testing-x86_64/pacman.conf.x86_64 (rev 0) +++ testing-x86_64/pacman.conf.x86_64 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,111 @@ +# +# /etc/pacman.conf +# +# See the pacman.conf(5) manpage for option and repository directives + +# +# GENERAL OPTIONS +# +[options] +# The following paths are commented out with their default values listed. +# If you wish to use different paths, uncomment and update the paths. +#RootDir = / +#DBPath = /var/lib/pacman/ +#CacheDir = /var/cache/pacman/pkg/ +#LogFile = /var/log/pacman.log +#GPGDir = /etc/pacman.d/gnupg/ +HoldPkg = pacman glibc +# If upgrades are available for these packages they will be asked for first +SyncFirst = pacman +#XferCommand = /usr/bin/curl -C - -f %u > %o +#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u +#CleanMethod = KeepInstalled +Architecture = auto + +# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup +#IgnorePkg = +#IgnoreGroup = + +#NoUpgrade = +#NoExtract = + +# Misc options +#UseSyslog +#UseDelta +#TotalDownload +CheckSpace +#VerbosePkgLists + +# PGP signature checking +# NOTE: None of this will work without running `pacman-key --init` first. +# The compiled in default is equivalent to the following line. This requires +# you to locally sign and trust packager keys using `pacman-key` for them to be +# considered valid. +#SigLevel = Optional TrustedOnly +# If you wish to check signatures but avoid local sign and trust issues, use +# the following line. This will treat any key imported into pacman's keyring as +# trusted. +#SigLevel = Optional TrustAll +# For now, off by default unless you read the above. +SigLevel = Never + +# +# REPOSITORIES +# - can be defined here or included from another file +# - pacman will search repositories in the order defined here +# - local/custom mirrors can be added here or in separate files +# - repositories listed first will take precedence when packages +# have identical names, regardless of version number +# - URLs will have $repo replaced by the name of the current repo +# - URLs will have $arch replaced by the name of the architecture +# +# Repository entries are of the format: +# [repo-name] +# Server = ServerName +# Include = IncludePath +# +# The header [repo-name] is crucial - it must be present and +# uncommented to enable the repo. +# + +# The testing repositories are disabled by default. To enable, uncomment the +# repo name header and Include lines. You can add preferred servers immediately +# after the header, and they will be used before the default mirrors. + +#[testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[core] +#SigLevel = PackageRequired +Include = /etc/pacman.d/mirrorlist + +[extra] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +#[community-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +[community] +#SigLevel = PackageOptional +Include = /etc/pacman.d/mirrorlist + +# If you want to run 32 bit applications on your x86_64 system, +# enable the multilib repositories as required here. + +#[multilib-testing] +#SigLevel = PackageRequired +#Include = /etc/pacman.d/mirrorlist + +#[multilib] +#SigLevel = PackageOptional +#Include = /etc/pacman.d/mirrorlist + +# An example of a custom package repository. See the pacman manpage for +# tips on creating your own repositories. +#[custom] +#SigLevel = Optional TrustAll +#Server = file:///home/custompkgs + Copied: pacman/repos/testing-x86_64/pacman.install (from rev 155848, pacman/trunk/pacman.install) =================================================================== --- testing-x86_64/pacman.install (rev 0) +++ testing-x86_64/pacman.install 2012-04-07 16:38:35 UTC (rev 155849) @@ -0,0 +1,73 @@ +#!/bin/sh +# arg 1: the new package version +# arg 2: the old package version +post_upgrade() { + # one time stuff for md5sum issue with older pacman versions + if [ "$(vercmp $2 3.0.2)" -lt 0 ]; then + _resetbackups + fi + if [ "$(vercmp $2 3.5.0)" -lt 0 ]; then + _warnupgrade + fi + _check_pubring +} + +post_install() { + _check_pubring +} + +_check_pubring() { + if [ ! -f "etc/pacman.d/gnupg/pubring.gpg" ]; then + echo " >>> Run \`pacman-key --init\` to set up your pacman keyring." + fi +} + +_warnupgrade() { + echo ">>> The pacman database format has changed as of pacman 3.5.0." + echo ">>> You will need to run \`pacman-db-upgrade\` as root." + echo ">>>" +} + +_resetbackups() { + echo ">>> Performing one-time reset of NoUpgrade md5sums. After this reset" + echo ">>> you are able to remove all NoUpgrade lines of already protected" + echo ">>> files from pacman.conf." + echo ">>>" + + # path variables + pacconf="/etc/pacman.conf" + dbpath="/var/lib/pacman/local" + + # get a list of NoUpgrade files from the user's pacman.conf + echo ">>> Retrieving pacman.conf NoUpgrade list..." + config=$(grep "^NoUpgrade" $pacconf | cut -d'=' -f2) + # add the standard list of files, even if they are already above + config="$config \ + etc/passwd etc/group etc/shadow etc/sudoers \ + etc/fstab etc/raidtab etc/ld.so.conf \ + etc/rc.conf etc/rc.local \ + etc/modprobe.conf etc/modules.conf \ + etc/lilo.conf boot/grub/menu.lst" + + # blank md5sum for use in sed expression + zeroes='00000000000000000000000000000000' + + for file in $config; do + echo ">>> -> finding owner of /$file..." + line=$(LC_ALL=C LANG=C pacman -Qo /$file 2>/dev/null) + # if file is owned by a package, go find its incorrectly stored sum + if [ ! -z "$line" ]; then + # get the name and version of the package owning file + name=$(echo $line | awk '{print $5}') + version=$(echo $line | awk '{print $6}') + # set the path to the backup array holding the md5sum + path="$dbpath/$name-$version/files" + # run a sed on the path to reset the line containing $file + # NOTE: literal tab characters in sed expression after $file + echo ">>> -> resetting sum of /$file..." + sed -i "s#$file [0-9a-fA-F]*#$file $zeroes#" $path + else + echo ">>> -> $file is unowned." + fi + done +}