Hello all, Since my (unknown) neighbour finally got smart enough to lock me out of his wireless access point (still unencrypted, probably filters on MAC address now), I got a Vodafone USB internet key, and even managed to make it work. But I've the impression that my current configuration isn't really optimal.
The key identifies as 19d2:1013, and usb_modeswitch changes this to 19d2:1015. At that point I also get a new network interface called 'usb0'. So my first idea was that all I had to do was to configure and bring up that interface, but using netcfg to do this results in a 'No connection' error. Some more googling resulted in the following wvdial config which indeed does the job: [Dialer vodafone] Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 Init3 = AT+CGDCONT=1,"IP","web.omnitel.it" Modem Type = USB Modem Phone = *99***1# ISDN = 0 Username = prova Password = prova Modem = /dev/ttyACM0 Baud = 460800 [Dialer pin] Modem = /dev/ttyACM0 Baud = 460800 Init1 = ATZ Init2 = AT +CPIN="****" The 'pin' target is required once after power up. The 'vodafone' target results in: --> WvDial: Internet dialer version 1.61 --> Cannot get information for serial port. --> Initializing modem. --> Sending: ATZ ATZ OK --> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 OK --> Sending: AT+CGDCONT=1,"IP","web.omnitel.it" AT+CGDCONT=1,"IP","web.omnitel.it" OK --> Modem initialized. --> Sending: ATDT*99***1# --> Waiting for carrier. ATDT*99***1# CONNECT 14400000 --> Carrier detected. Waiting for prompt. --> Don't know what to do! Starting pppd and hoping for the best. --> Starting pppd at Sat Sep 10 17:52:39 2011 --> Pid of pppd: 4140 --> Using interface ppp0 --> pppd: �[05]�[08]@�[08]�[07]�[08] --> pppd: �[05]�[08]@�[08]�[07]�[08] --> pppd: �[05]�[08]@�[08]�[07]�[08] --> pppd: �[05]�[08]@�[08]�[07]�[08] --> pppd: �[05]�[08]@�[08]�[07]�[08] --> local IP address 109.113.40.0 --> pppd: �[05]�[08]@�[08]�[07]�[08] --> remote IP address 10.0.0.1 --> pppd: �[05]�[08]@�[08]�[07]�[08] --> primary DNS address 83.224.70.77 --> pppd: �[05]�[08]@�[08]�[07]�[08] --> secondary DNS address 83.224.70.54 --> pppd: �[05]�[08]@�[08]�[07]�[08] plus a new network interface 'ppp0' and a working internet connection - I'm using it to write this post. But there are some strange things: 1. The 'Don't know what to do! Starting pppd and hoping for the best.' line from wvdial looks suspect. 2. The fact that I have _two_ new network interfaces. The existence of the 'usb0' one seems to suggest I don't need pppd at all, but how then to bring it up ? Any information / suggestions to improve this will be appreciated. Also, if at all possible I'd like to put all this into a neat netcfg profile. TIA, -- FA