On Sun, Feb 12, 2012 at 1:07 PM, Jordan Windsor <jorda...@gmail.com> wrote: > On Sun, Feb 12, 2012 at 8:29 AM, Mauro Santos > <registo.maill...@gmail.com> wrote: >> On 11-02-2012 21:08, Jordan Windsor wrote: >>> Hello, >>> I was downloading 3 movies via sabnzbd (~5GB each), after awhile I >>> noticed the system wasn't responding as much, RhythmBox wasn't playing >>> anymore, sabnzbd wasn't making progress and my broswer also was >>> slowing down a bit. >>> I then decided to restart thinking it would solve what ever problems >>> sabnzbd brought along, when I did that it didn't reboot it just logged >>> me out, I couldn't log back in, it would accept my password and >>> username but after that nothing would happen, I then hard powered it >>> off, on start-up it wouldn't get past the "mounting local filesystems" >>> part of the boot process, it would just print DMA errors and more. >>> I'm running PassMark's DiskCheckup on both my disks, on the first the >>> quick self check completes quickly without error, but the second drive >>> doesn't get past 10% (starts on 10%) and shows "The last self-test >>> routine completed with a failure of the read element." >>> I was wondering is my disk 100% gone? or is the some chance of getting >>> my RAID0 data off? although 90% is easily replaceable (movies). >>> Thanks. (I'll reply later with the details of the error messages >>> displayed during boot.) >>> >> >> Check the connections/cables, if the connections/cables are ok and you >> have a failing disk then I'd say you should consider you data as lost >> since it is on a raid0 array. >> >> -- >> Mauro Santos > > Thanks, here's the error message displayed during boot and during > system run (not line wrapped correctly): > > ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 > BMDMA tsat 0x24 > failed command: READ DMA EXT > cmd 25/00:08:e8:83:0a/00:00:28:00:00/e0 > tag 0 dma 4096 in res 51/40:00:18:8d:0c/40:00:28:00:00/e0 Emsk 0x9 (media > error) > Status: {DRDY ERR} > error: {UNC} Configured for UDMA1133 > GH Complete > > I'll reboot now and check the cables, Thanks.
I checked the cables many times, including the SATA ports used, the hard drive wouldn't work in any configuration. Thanks. (Solution found, get a new hard drive :) )