Hi
On 03/18/2016 12:13 AM, Kenneth Jensen wrote:
Hi,
Have you read
https://wiki.archlinux.org/index.php/L2TP/IPsec_VPN_client_setup ?
Yes, I read it. But as per my ipsec.conf, my strongswan configuration
doesn't support L2TP protocol. (please find my ipsec.conf towards the
bottom of this email). My other clients are using IKEv2 without any
problem. I haven't tested any other client with L2TP yet.
# ipsec.conf - strongSwan IPsec configuration file
config setup
# uniqueids=never
charondebug="cfg 2, dmn 2, ike 2, net 2"
conn %default
keyexchange=ikev2
ike=aes128-sha256-ecp256,aes256-sha384-ecp384,aes128-sha256-modp2048,aes128-sha1-modp2048,aes256-sha384-modp4096,aes256-sha256-modp4096,aes256-sha1-modp4096,aes128-sha256-modp1536,aes128-sha1-modp1536,aes256-sha384-modp2048,aes256-sha256-modp2048,aes256-sha1-modp2048,aes128-sha256-modp1024,aes128-sha1-modp1024,aes256-sha384-modp1536,aes256-sha256-modp1536,aes256-sha1-modp1536,aes256-sha384-modp1024,aes256-sha256-modp1024,aes256-sha1-modp1024!
esp=aes128gcm16-ecp256,aes256gcm16-ecp384,aes128-sha256-ecp256,aes256-sha384-ecp384,aes128-sha256-modp2048,aes128-sha1-modp2048,aes256-sha384-modp4096,aes256-sha256-modp4096,aes256-sha1-modp4096,aes128-sha256-modp1536,aes128-sha1-modp1536,aes256-sha384-modp2048,aes256-sha256-modp2048,aes256-sha1-modp2048,aes128-sha256-modp1024,aes128-sha1-modp1024,aes256-sha384-modp1536,aes256-sha256-modp1536,aes256-sha1-modp1536,aes256-sha384-modp1024,aes256-sha256-modp1024,aes256-sha1-modp1024,aes128gcm16,aes256gcm16,aes128-sha256,aes128-sha1,aes256-sha384,aes256-sha256,aes256-sha1!
dpdaction=clear
dpddelay=300s
rekey=no
left=%any
leftsubnet=0.0.0.0/0
leftcert=vpnHostCert.pem
right=%any
rightdns=8.8.8.8,8.8.4.4
rightsourceip=172.16.16.0/24
conn IPSec-IKEv2
keyexchange=ikev2
auto=add
conn IPSec-IKEv2-EAP
also="IPSec-IKEv2"
rightauth=eap-mschapv2
rightsendcert=never
eap_identity=%any
conn CiscoIPSec
keyexchange=ikev1
# forceencaps=yes
rightauth=pubkey
rightauth2=xauth
auto=add
