On 3/28/26 4:58 PM, Łukasz Michalski wrote:
I think that it is safer to alter nut-driver@valkyrie_ups.service. It is
autogenerated by enumerator from /etc/nut/ups.conf entries.
As for pollonly flag, it is an usbhid-ups config flag, so you have to
add it to your ups section in /etc/nut/ups.conf.
Thank you will give this a shot if another comm loss and force shutdown
occurs. I found the proper syntax that I was scratching my head about.
Since it's a single flag, it's = enabled, e.g.
pollonly = enabled
in my [upsname] section of ups.conf.
--
David C. Rankin, J.D.,P.E.
