On Mon, Jan 16, 2023 at 07:55:47PM +0100, Andreas Grapentin wrote: > > I’ve found the parabola image I used back in 2021, and tried to boot it on an > EOMA card revision 2.7.4 and a microdesktop revision 1.7 > > In the process of attaching peripheries, I must have blown something on the > microdesktop, the power LED no longer lights up, tested multiple chargers. > I’m fairly certain that the LED did light up green when I started working on > the board today. Is it possible that I blew a fuse somewhere? > > Apart from that, I currently can’t get the system to boot. I have output from > the boot loader, but it’s not much: > > U-Boot SPL 2017.01-2 (Jan 18 2017 - 21:30:38) > DRAM: 2048 MiB > CPU: 912000000Hz, AXI/AHB/APB: 3/2/2 > Trying to boot from MMC2MMC Device 1 not found > spl: could not find mmc device. error: -19 > SPL: failed to boot from all boot devices > ### ERROR ### Please RESET the board ### > > This is when I insert the sd card in the EOMA card directly. When I insert > the sd card into the microdesktop, I don’t get anything. Still working on it > though. >
Could you please clarify your setup. Is this sunxi-u-boot (legacy u-boot) via fel or written to the sd card? Are there changes software or hardwire wise? I don't understand why it worked 2021 and fails to boot now. Pablo _______________________________________________ arm-netbook mailing list [email protected] Configuration, options, subscribe and unsubscribe at: http://lists.phcomp.co.uk/mailman/listinfo/arm-netbook Send large attachments to: [email protected]
