Quoting Andy Green <a...@warmcat.com>: > On 06/01/2011 09:56 AM, Somebody in the thread at some point said: > > Hi - > >>>> Note: I get crappy performance with the network *up*, as long as >>>> there's no traffic. > >>> I had a go a reproducing this also on a 2.6.38-based kernel on Panda. >>> I was thinking it sounds a bit like USB suspend (not the same as > >>> to see if there was something obvious to hack suspend disabled but >>> didn't see anything useful. >> >> try disabling pm_runtime completely. > > Thanks for the idea --> > > # CONFIG_PM_RUNTIME is not set > > Acts the same > > root@linaro:~# dd if=/dev/zero of=/media/FAD8-72F0/dump bs=4096 count=10240 > 10240+0 records in > 10240+0 records out > 41943040 bytes (42 MB) copied, 16.045 s, 2.6 MB/s > root@linaro:~# dd if=/dev/zero of=/media/FAD8-72F0/dump bs=4096 count=10240 > 10240+0 records in > 10240+0 records out > 41943040 bytes (42 MB) copied, 17.28 s, 2.4 MB/s > root@linaro:~# dd if=/dev/zero of=/media/FAD8-72F0/dump bs=4096 count=10240 > 10240+0 records in > 10240+0 records out > 41943040 bytes (42 MB) copied, 11.8782 s, 3.5 MB/s > root@linaro:~# dd if=/dev/zero of=/media/FAD8-72F0/dump bs=4096 count=10240 > 10240+0 records in > 10240+0 records out > 41943040 bytes (42 MB) copied, 12.368 s, 3.4 MB/s > > CONFIG_OMAP_WATCHDOG blows an imprecise external about with > RUNTIME_PM disabled BTW, I guess that peripheral unit isn't clocked > without it.
FlexPWR is a feature of the chip so im not sure you -can- disable it. I wonder if is kicking in and lowering the voltage on the whole bus because 1 of the devices is idle. Or whether it is trying to save power after sending the data, waiting for the data to be written on the device. Does it happen with the memory stick and the drive connected and doing something like: dd if=/dev/zero of=/media/FAD8-72F0/dump bs=4096 count=10240 & dd if=/dev/zero of=/media/memorystick/dump bs=4096 count=10240 & Or does it happen with reads too? dd if=/media/FAD8-72F0/dump of=/dev/zero bs=4096 count=10240 _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm