-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 El Mon, 27 Aug 2012 13:15:43 -0500 Jon <jdisn...@gmail.com> escribió: > Hello. > > > Problem statement: > Fedora 17. > Updating to recent kernel on Pandaboard ES causes HDMI to stop > working. The known good setup is the stock panda-xfce image[1] on the > fedora-arm wiki [2]. > There are some kernel parameters to mess with the video output, HDMI > or DVI-D at omapedia [3], but those do not help. > Here is what I tried in /boot/uboot/uEnv.txt: > omapfb.mode=dvi:1280x1024MR-24@60 omapdss.def_disp=dvi
we use omapdrm not omapfb so none of those options will have any effect. its all auto detected and auto setup. if the edid data is not read from the monitor you will get 1024x768 only. ive not tried the 3.5 based kernels as im not at home where i have access to a monitor. you shouldn't use the xpfa repo there is no need Fedora 17 will update and work just fine with whats in Fedora 17. you could try switching which port you plug the monitor into. you would also need to look at the output of dmesg to see what is happening. Dennis -----BEGIN PGP SIGNATURE----- Version: GnuPG v2.0.18 (GNU/Linux) iEYEARECAAYFAlA8BLwACgkQkSxm47BaWfejqwCZARrdqnivX0js+HPOwSTXxMSR f54An1l5tDa1Nxp7wCpsQODIodgrMGhJ =Xj1r -----END PGP SIGNATURE----- _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm