On Tue, Jul 21, 2015 at 2:30 PM, Zamir SUN <z...@fedoraproject.org> wrote: > Just an update that the problem (can not boot into TF card) still happens on > Fedora-Xfce-armhfp-23-20150720 (4.2.0-0.rc2.git2.1.fc23).
Can you retry a newer image, anything post Jul 22nd should be fine. I've dropped all the non-upstream patches we were carrying (from Robert's repo) just in case they were causing issues. In terms of features I'm not sure they give us much, for me (minimal install on eMMC) they work and fix a crash I was seeing with SPI. If it still fails can you fpaste the entire boot output (u-boot and kernel) please? Peter > On 07/17/2015 08:55 PM, Zamir SUN wrote: >> >> >> >> On 07/17/2015 01:10 AM, Paul Whalen wrote: >>> >>> ----- Original Message ----- >>>> >>>> Hi Robert, >>>> >>>> On 07/16/2015 10:24 PM, Robert Nelson wrote: >>>>> >>>>> On Thu, Jul 16, 2015 at 8:40 AM, Zamir SUN <z...@fedoraproject.org> >>>>> wrote: >>>>>> >>>>>> Hi team, >>>>>> I am planning to test Fedora 23 ARM on Beagle Bone black from the >>>>>> early >>>>>> image. So I downloaded Fedora-Xfce-armhfp-23-20150715-sda.raw.xz from >>>>>> http://koji.fedoraproject.org/koji/taskinfo?taskID=10371084 and >>>>>> flash it >>>>>> into a TF card. >>>>>> >>>>>> During the flashing, I find such error: >>>>>> >>>>>> = Writing image complete! >>>>>> = Writing MLO for beaglebone.... >>>>>> dd: failed to open ‘/tmp/root/usr/share/uboot/beaglebone/MLO’: No such >>>>>> file >>>>>> or directory >>>>>> = Writing u-boot.img for beaglebone.... >>>>>> dd: failed to open >>>>>> ‘/tmp/root/usr/share/uboot/beaglebone/u-boot.img’: No >>>>>> such file or directory >>>>> >>>>> >>>>> Looks like your task above, missed these crucial boot files.. >>>>> >>>> Thanks for your reminder. >>>> I checked and find that on F22 the file lies in beaglebone, but in F23 >>>> the directory is renamed to am335x_boneblack so the fedora-arm-installer >>>> script no longer works. >>>> >>>> I will manually finish the steps and continue my testing. >>> >>> >> Hi Paul, >>> >>> There is a new version of the script in rawhide, you can also created >>> a symlink >>> and use the new name. >>> >>> There are few others things that might be missing like serial console >>> detection, >>> so will likely need to add that to the extlinux.conf. >>> >>> So far in my testing the 4.2 kernel seems to have an issue with mSD, >>> but does find >>> the eMMC on the beaglebone black. Let us know how it goes for you! >>> >> Yes I find it can not boot and just fall back to dracut. I even tried to >> switch to another TF card to make sure it is not caused by the card, but >> the result is the same. I was planning to have a confirm today and then >> saw your reply. So do you have a bug id for this so that I can post my >> log there? >> >> And here is my log http://paste.fedoraproject.org/245362/ >> >> Zamir >> >> >>> Paul >>> >>> >>>> >>>>> >>>>>> >>>>>> = Installation Complete! Insert into the beaglebone and boot. >>>>>> $ >>>>>> And then I just try to boot Beagle Bone Black from the image and >>>>>> find it >>>>>> do >>>>>> not work. The serial output is as following: >>>>>> U-Boot SPL 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54) >>>>>> reading args >>>>>> spl_load_image_fat_os: error reading image args, err - -1 >>>>>> reading u-boot.img >>>>>> reading u-boot.img >>>>>> >>>>>> >>>>>> U-Boot 2014.04-00014-g47880f5 (Apr 22 2014 - 13:23:54) >>>>>> >>>>>> I2C: ready >>>>>> DRAM: 512 MiB >>>>>> NAND: 0 MiB >>>>>> MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1 >>>>>> *** Warning - readenv() failed, using default environment >>>>>> >>>>>> Net: <ethaddr> not set. Validating first E-fuse MAC >>>>>> cpsw, usb_ether >>>>>> Hit any key to stop autoboot: 0 >>>>>> gpio: pin 53 (gpio 53) value is 1 >>>>>> mmc0 is current device >>>>>> gpio: pin 54 (gpio 54) value is 1 >>>>>> SD/MMC found on device 0 >>>>>> ** File not found uEnv.txt ** >>>>>> Checking if uenvcmd is set ... >>>>>> >>>>>> uenvcmd was not defined in uEnv.txt ... >>>>>> gpio: pin 56 (gpio 56) value is 0 >>>>>> gpio: pin 55 (gpio 55) value is 0 >>>>>> gpio: pin 54 (gpio 54) value is 0 >>>>>> mmc1(part 0) is current device >>>>>> >>>>>> then it boot to my system on emmc. So am I wrong in some steps? Or the >>>>>> image >>>>>> just can not boot up on Beagle Bone Black by design? >>>>> >>>>> >>>>> That old factory bootloader in the eMMC doesn't know about how to deal >>>>> with newer extlinux image's. >>>>> >>>>> Regards, >>>>> >>>> >>>> -- >>>> Zamir SUN >>>> z...@fedoraproject.org >>>> zsun in #fedora-zh #openshift on freenode.net >>>> _______________________________________________ >>>> arm mailing list >>>> arm@lists.fedoraproject.org >>>> https://admin.fedoraproject.org/mailman/listinfo/arm >> >> > > -- > Zamir SUN > z...@fedoraproject.org > zsun in #fedora-zh #openshift on freenode.net > _______________________________________________ > arm mailing list > arm@lists.fedoraproject.org > https://admin.fedoraproject.org/mailman/listinfo/arm _______________________________________________ arm mailing list arm@lists.fedoraproject.org https://admin.fedoraproject.org/mailman/listinfo/arm