This is on a Cubieboard2
with Fedora-Xfce-armhfp-29-20180911.n.0-sda image on the HD and only
uboot on the uSD.
System booted up as expected. GUI setup occured and Xfce started. Then
on console I started seeing HD related messages. Are these drive
errors, and I need to get a new drive for testing or some other sort of
messages?
[ 824.049554] ata1.00: failed command: READ FPDMA QUEUED
[ 824.054798] ata1.00: cmd 60/20:60:10:ab:34/00:00:00:00:00/40 tag 12
ncq dma 16384 in
[ 824.054798] res 40/00:84:50:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.070574] ata1.00: status: { DRDY }
[ 824.074287] ata1.00: failed command: READ FPDMA QUEUED
[ 824.079495] ata1.00: cmd 60/08:68:00:ab:34/00:00:00:00:00/40 tag 13
ncq dma 4096 in
[ 824.079495] res 40/00:84:50:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.095220] ata1.00: status: { DRDY }
[ 824.098928] ata1.00: failed command: READ FPDMA QUEUED
[ 824.104134] ata1.00: cmd 60/10:70:e8:aa:34/00:00:00:00:00/40 tag 14
ncq dma 8192 in
[ 824.104134] res 40/00:84:50:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.119808] ata1.00: status: { DRDY }
[ 824.123520] ata1.00: failed command: READ FPDMA QUEUED
[ 824.128725] ata1.00: cmd 60/38:78:00:32:31/00:00:00:00:00/40 tag 15
ncq dma 28672 in
[ 824.128725] res 40/00:84:50:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.144503] ata1.00: status: { DRDY }
[ 824.148234] ata1.00: failed command: READ FPDMA QUEUED
[ 824.153440] ata1.00: cmd 60/48:80:50:ab:34/00:00:00:00:00/40 tag 16
ncq dma 36864 in
[ 824.153440] res 40/00:84:50:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.169219] ata1.00: status: { DRDY }
[ 824.172947] ata1: hard resetting link
[ 824.486151] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 824.539710] ata1.00: configured for UDMA/33
[ 824.544114] ata1: EH complete
[ 824.577421] ata1.00: exception Emask 0x10 SAct 0x2 SErr 0x280100
action 0x6 frozen
[ 824.585177] ata1.00: irq_stat 0x08000000, interface fatal error
[ 824.591239] ata1: SError: { UnrecovData 10B8B BadCRC }
[ 824.596429] ata1.00: failed command: READ FPDMA QUEUED
[ 824.601605] ata1.00: cmd 60/48:08:50:ab:34/00:00:00:00:00/40 tag 1
ncq dma 36864 in
[ 824.601605] res 40/00:2c:10:ab:34/00:00:00:00:00/40 Emask
0x10 (ATA bus error)
[ 824.617259] ata1.00: status: { DRDY }
[ 824.620962] ata1: hard resetting link
[ 824.937794] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 824.994304] ata1.00: failed to set xfermode (err_mask=0x100)
[ 830.196474] ata1: hard resetting link
[ 830.509657] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 830.560362] ata1.00: configured for UDMA/33
[ 830.564657] ata1: EH complete
_______________________________________________
arm mailing list -- [email protected]
To unsubscribe send an email to [email protected]
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/[email protected]
