Hi Folks,
Longtime Fedora user here. Last winter, I got a Raspberry Pi, and
installed F28 on it. Using the HDMI output, it works well. Recently, I
picked up the Raspberry Pi 7" display (and case). After hooking up the
display to the Pi via the ribbon cable, I booted it up.
The 7" display works well as the initial console, and I see all the
usual messages go flying by. At some point (when it decides to switch
to graphics mode) the display goes blank. Nothing on it. I cannot
switch even to a virtual console. The new case blocks using the HDMI
port, so I had to remove the Pi from the case (while leaving the ribbon
cable attached to the display). After plugging a monitor into the HDMI
port, what I discovered was that the Pi boots using the display as
console, then switches to the HDMI port for the X11 driver. (not useful)
How can I get the X11 display to come up on the 7" display in graphics
mode. What do I need? A new xorg-x11-drv driver? A newer kernel?
I'd like to turn this into a MythTV server (with a USB capture) and use
the display as a system console with the ability to watch videos on it.
(Yeah, I'm aware that its only a 800x400 screen.) Failing that, I'd
like to use it in a "tablet" mode and get used to the touch screen
interface.
--
Kevin J. Cummings
cummi...@kjchome.homeip.net
cummi...@kjc386.framingham.ma.us
kjch...@icloud.com
Registered Linux User #1232 (http://www.linuxcounter.net/)
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
