Hi Benson,
No, unfortunately seems not working.
I've tried with seek (16348, 64, 512, etc). No luck.
I think the problem is related how to boot images are builded.
Should I write sidbloader.img?
Following Your link about ARMv8, i see at row 3:
dd if=$PREFIX/usr/share/uboot/$TARGET/spl.img of=$MEDIA seek=64; sync; sleep 5
But spl.img is not available in usr/share/uboot/ in my sdcard.
So, I still searching over web.
Meanwhile, did You known that serial console speed of
Il 12/11/19 07:46, Benson Muite ha scritto:
Hi Agharta,
Thanks for the update. Responses below. Hope you are successful.
Benson
On 11/11/19 7:09 PM, aghart...@gmail.com wrote:
Hi Benson,
You helped me a lot!!!
Following Your suggestion, I've investigate over $TARGET and $MEDIA.
After writing sdcard with pine64-lts, inside usr/share/uboot/ (of sdcard) i can
see rock64-rk3328 (my sbc), rockpro64-rk3399 and many other sbc not listed into
arm-image-installer folder (/usr/share/arm-image-installer/boards.d/)!!!!!!!!
So, rock64 is really supported by fedora (31, minimal, aarch64)!!!
Another interesting thing: if I create a file called rock64-rk3328 into my
/usr/share/arm-image-installer/boards.d/ and set --target=rock64-rk3328,
arm-image-installer executes IT!
So, next step: I've copied pine64-lts into rock64-rk3328.
One question: rock64-rk3328 folder does not have sunxi-spl.bin, but a file
called idbloader.img. Should I 'dd' it insead of sunxi-spl.bin?
Following this link seems yes http://opensource.rock-chips.com/wiki_Boot_option
Thanks, this seems helpful.
Seems needed to add some extra stuffs too (seek):
dd if=idbloader.img of=sdb seek=64
dd if=u-boot.itb of=sdb seek=16384
So, script become as follow:
# write uboot
echo "= Writing idbloader.img for $TARGET ...."
dd if=$PREFIX/usr/share/uboot/$TARGET/sidbloader.img of=$MEDIA bs=8k seek=64;
sync
echo "= Writing u-boot FIT image for $TARGET ...."
dd if=$PREFIX/usr/share/uboot/$TARGET/u-boot.itb of=$MEDIA bs=8k seek=16384;
sync; sleep 5
# set console for allwinner
SYSCON=ttyS0,115200
Looks similar to what is at:
https://pagure.io/arm-image-installer/blob/master/f/socs.d/Rockchips-ARMv8
https://pagure.io/arm-image-installer/blob/master/f/socs.d/Rockchips-ARMv7
Might need to change seek value. I do not have that board, so cannot try this
out, but hope it works. If it does work, can you contribute the script back? I
believe additions are also needed here:
https://pagure.io/arm-image-installer
https://pagure.io/arm-image-installer/blob/master/f/boards.d
Tomorrow I'll try!
Thanks a lot for Your support.
Best regards,
Agharta
Il 11/11/19 16:21, Benson Muite ha scritto:
Hi Agharta,
I used an earlier Fedora release on Banana pro (after first using Fedora
combined with a different kernel). It worked ok, but took a bit of time for the
Arm image to support Banana pro.
On 11/11/19 4:04 PM, aghart...@gmail.com wrote:
Hi Benson
a) Yes, but I can't specify Rock64 as --target parameter.
"A number of Pine64 boards are supported, but you might use as a bass to get
something for rock64" Can You explain me how? Is it possibile without manual
recompilation, etc...? (see why in b) and c) )
There was a message earlier on the list that support had been added for rock
64. Thus you might be able to take the configuration for Pine64 and modify that
for Rock 64, though can also wait. After installing the arm image installer, as
indicated at https://fedoraproject.org/wiki/Architectures/ARM/Installation in a
terminal I can type
$ls /usr/share/arm-image-installer/boards.d/
to get a listing of supported boards. Typing
$more /usr/share/arm-image-installer/boards.d/pinebook
gives settings for Pinebook, which are
# write uboot
echo "= Writing sunxi-spl.bin for $TARGET ...."
dd if=$PREFIX/usr/share/uboot/$TARGET/sunxi-spl.bin of=$MEDIA bs=8k seek=1; sync
echo "= Writing u-boot FIT image for $TARGET ...."
dd if=$PREFIX/usr/share/uboot/$TARGET/u-boot.itb of=$MEDIA bs=8k seek=5; sync;
sleep 5
# set console for allwinner
SYSCON=ttyS0,115200
The commands for pine_h64, pine64_plus and pine64-lts are the same, so you
might try these for your Rock 64.
b) Yes, an Armbian kernel....but I'd like to use a 'standard' kernel.
Ok.
c) Yes, is possibile, but i still prefer a community delivered rpm (and
maintained).
Noted. Thanks for using and reporting where work is still required. Sorry
cannot be much more help at present.
Thanks again for Your support.
Best regards,
Agharta
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
