On 28.03.2021 20:42, Peter Robinson wrote:
Is the output over HDMI or Serial TTY? If the later can you edit the
option at the grub2 menu (hit 'e' on the kernel entry) and remove the
"rhgb quiet console=tty0" section of the kernel command line and then
proceed to boot and see if you get output.
Thnx, Yes, ooutput is via serial console. Had to remove kernel parameter
console=tty0.
Afterwards the boot setup menu came up. See below. That was the reason
why it stopped.
Afterwards edit boot parameter permanently.
nano -w -I /boot/grub2/grub.cfg
if [ -z "${kernelopts}" ]; then
#set kernelopts="root=/dev/mapper/fedora_fedora-root ro
rd.lvm.lv=fedora_fedora/root console=tty0 "
set kernelopts="root=/dev/mapper/fedora_fedora-root ro
rd.lvm.lv=fedora_fedora/root "
fi
Thnx.
Ciao,
Gerhard
================================================================================
================================================================================
1) [x] Language settings 2) [x] Time settings (English (United States))
(US/Eastern timezone) 3) [x] Network configuration 4) [x] Root password
(Wired (eth0) connected) (Disabled. Set password to enable root
account.) 5) [ ] User creation (No user will be created) Please make a
selection from the above ['c' to continue, 'q' to quit, 'r' to refresh]:
================================================================================
================================================================================
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Do not reply to spam on the list, report it:
https://pagure.io/fedora-infrastructure
