Just to supplement Stephan Wahren's observations about Pi 4s:-
I have tried the latest beta F36 with my Pi 3B+, and the GPIOs do not
seem to work (yet):
i.e. Fedora-Minimal-36_Beta-1.4.aarch64.raw.xz
The command, gpioset `gpiofind GPIO27`=0, seems to do nothing, as does
'=1' instead of the '=0'.
The latest kernel I have where GPIOs and the above gpioset command work
is the F35 5.14.10-300 aarch64 one. Later F35 kernels do not work (yet).
Using the 5.14.10-300 F35 kernel, the command, 'gpioset `gpiofind
GPIO27`=0', raises the voltage on the GPIO pin to 3.3V, rather than
lowering it as I would have expected.
Hope this helps some-one somewhere ...
:D
On 05/03/2022 11:34, Stefan Wahren wrote:
Today i tried Fedora 35 Minimal for my first time, here are my test results:
Raspberry Pi 400 32 bit => bus width issue
Raspberry Pi 400 64 bit => hangs while show graphics
Raspberry Pi 4 B 4 GB 32 bit => kernel crash
Raspberry Pi 4 B 4 GB 64 bit => boot into setup
Raspberry Pi 4 B 8 GB 32 bit => black screen, fails to start kernel?
Raspberry Pi 4 B 8 GB 64 bit => boot into setup
At least the 32 bit issues on Raspberry Pi 4 are expected since the
kernel config doesn't have ARM_LPAE enabled.
_______________________________________________
arm mailing list -- arm@lists.fedoraproject.org
To unsubscribe send an email to arm-le...@lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
Do not reply to spam on the list, report it:
https://pagure.io/fedora-infrastructure