Another platform that I am working on. Please let me know if someone else has a public port to similar hardware. The SATA ports, LED's, buttons, RTC, temp sensor and fan control are not supported yet. The dmesg is at the end.
Thanks, Lwazi http://lwazi.ca/openbsd OpenBSD 5.0 (GENERIC) #478: Wed Jan 11 12:46:15 MST 2012 lwazi@tbox:/usr/src/sys/arch/dns323/compile/GENERIC real mem = 67108864 (64MB) avail mem = 59990016 (57MB) mainbus0 at root cpu0 at mainbus0: ARM926EJ-S rev 0 (ARM9EJ-S core) cpu0: DC enabled IC enabled WB enabled EABT branch prediction enabled cpu0: 32KB(32b/l,1way) I-cache, 32KB(32b/l,1way) **unknown 14** D-cache orion0 at mainbus0: Marvell MV88F5182 SoC Rev. A0 Orion1 orion0: CPU Clock 500.000 MHz SysClock 166.666 MHz TClock 166.664 MHz orionintc0 at orion0 addr 0xf1020200-0xf10221ff: Interrupt Controller oriontmr0 at orion0 addr 0xf1020300-0xf10222ff: Marvell Orion Timer com0 at orion0 addr 0xf1012000-0xf1013fff irq 3: ns16550a, 16 byte fifo com0: console oriongbe0 at orion0 addr 0xf1072000-0xf1073fff: Marvell Orion Gigabit Ethernet Controller eephy0 at oriongbe0 phy 8: 88E1111 Gigabit PHY, rev. 2 ehci0 at orion0 addr 0xf1050000-0xf1051fff irq 17: Marvell Orion USB 2.0 Interface usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Marvell EHCI root hub" rev 2.00/1.00 addr 1 /dev/ksyms: Symbol table not valid. uhub1 at uhub0 port 1 "vendor 0x05e3 USB2.0 Hub" rev 2.00/77.61 addr 2 umass0 at uhub1 port 2 configuration 1 interface 0 "ITE TECH. INC. USB TO IDE" rev 2.00/2.00 addr 3 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: <, FUJITSU MHK2120A, D834> SCSI0 0/direct fixed serial.048d8903034911000391 sd0: 11513MB, 512 bytes/sector, 23579136 sectors vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets boot device: lookup '(null)' failed. root device: sd0a swap device (default sd0b): root on sd0a swap on sd0b dump on sd0b
