Obviously not supported hardware, but wanted to throw this out in case
it's of use to anyone. I picked up the mid-level CuBox-i2eX
(dual-core, serial over USB,
http://www.solid-run.com/products/cubox-i-mini-computer/cubox-i-specifications/)
model and attempted to load the 12/14/2014 IMX snapshot (via tftp
using SolidRun's Ignition image as the U-Boot source). Logs are below,
let me know if there's any assistance I can in the future. Thanks.
U-Boot SPL 2013.10-rc4 (Oct 27 2014 - 18:17:31)
Boot Device: SD1
spl: error reading image u-boot.img, err - -1
Load image from RAW...
U-Boot 2013.10-rc4 (Oct 27 2014 - 18:17:31)
CPU: Freescale i.MX6Q rev1.5 at 792 MHz
Reset cause: WDOG
Board: MX6-CuBox-i
DRAM: 1 GiB
MMC: FSL_SDHC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: vga
Err: vga
Net: FEC [PRIME]
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
Hit any key to stop autoboot: 0
CuBox-i U-Boot > dhcp
BOOTP broadcast 1
DHCP client bound to address 10.X.Y.113
Using FEC device
TFTP from server 10.X.Y.1; our IP address is 10.X.Y.113
Filename 'pxelinux.0'.
Load address: 0x10800000
Loading: ####
1.2 MiB/s
done
Bytes transferred = 46909 (b73d hex)
CuBox-i U-Boot > tftpboot ${loadaddr} openbsd/bsd.rd.IMX.umg
Using FEC device
TFTP from server 10.X.Y.1; our IP address is 10.X.Y.113
Filename 'openbsd/bsd.rd.IMX.umg'.
Load address: 0x10800000
Loading: #################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
#################################################################
######################################################
1.4 MiB/s
done
Bytes transferred = 7461152 (71d920 hex)
CuBox-i U-Boot > bootm
## Booting kernel from Legacy Image at 10800000 ...
Image Name: boot
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 7461088 Bytes = 7.1 MiB
Load Address: 10800000
Entry Point: 10800000
Verifying Checksum ... OK
XIP Kernel Image ... OK
Starting kernel ...
undefined instruction
pc : [<10800008>] lr : [<4ff723b9>]
sp : 4f770d70 ip : 0000001e fp : 00000000
r10: 00000000 r9 : 4f770f38 r8 : 4ff724e9
r7 : 00000000 r6 : 10800000 r5 : 4ffa1c6c r4 : 00000000
r3 : 4f770fe0 r2 : 10000100 r1 : 000012d5 r0 : 4f770fe0
Flags: nZCv IRQs off FIQs off Mode SVC_32
Resetting CPU ...
resetting ...
Brian Conway
