Hi,
Trying to install a cubieboard2, I get :
OpenBSD/sunxi booting ...
arg0 0x0 arg1 0x10bb arg2 0x40000100
atag core flags 0 pagesize 0 rootdev 0
atag mem start 0x40000000 size 0x40000000
bootfile:
bootargs:
memory size derived from u-boot
bootconf.mem[0].address = 40000000 pages 262144/0x40000000
Allocating page tables
freestart = 0x40aaa000, free_pages = 259414 (0x0003f556)
IRQ stack: p0x40ad8000 v0xc0ad8000
ABT stack: p0x40ad9000 v0xc0ad9000
UND stack: p0x40ada000 v0xc0ada000
SVC stack: p0x40adb000 v0xc0adb000
Creating L1 page table at 0x40aac000
Mapping kernel
Constructing L2 page tables
undefined page pmap board type: 4283
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights
reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.9 (RAMDISK) #41: Thu Feb 18 11:26:25 AEDT 2016
[email protected]:/usr/src/sys/arch/armv7/compile/RAMDISK
real mem = 1073741824 (1024MB)
avail mem = 1041670144 (993MB)
mainbus0 at root
cortex0 at mainbus0
ampintc0 at cortex0 nirq 160
agtimer0 at cortex0: tick rate 24000 KHz
cpu0 at mainbus0: ARM Cortex A7 rev 4 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch
prediction enabled
cpu0: 32KB(32b/l,2way) I-cache, 32KB(64b/l,4way) wr-back
D-cache
sunxi0 at mainbus0: Allwinner A20
sxipio0 at sunxi0
sxiccmu0 at sunxi0
sxidog0 at sunxi0
sxirtc0 at sunxi0
sxiuart0 at sunxi0: console
sxiuart1 at sunxi0
sxiuart2 at sunxi0
sxiuart3 at sunxi0
sxiuart4 at sunxi0
sxiuart5 at sunxi0
sxiuart6 at sunxi0
sxiuart7 at sunxi0
sxie0 at sunxi0, address 02:0f:0b:03:c2:20
rlphy0 at sxie0 phy 1: RTL8201L 10/100 PHY, rev. 1
ahci0 at sunxi0 AHCI 1.1
scsibus0 at ahci0: 32 targets
ehci0 at sunxi0
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Allwinner EHCI root hub" rev 2.00/1.00 addr 1
ehci1 at sunxi0
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Allwinner EHCI root hub" rev 2.00/1.00 addr 1
gpio0 at sxipio0: 18 pins
gpio1 at sxipio0: 24 pins
gpio2 at sxipio0: 25 pins
gpio3 at sxipio0: 28 pins
gpio4 at sxipio0: 12 pins
gpio5 at sxipio0: 6 pins
gpio6 at sxipio0: 12 pins
gpio7 at sxipio0: 28 pins
gpio8 at sxipio0: 22 pins
boot device: lookup '' failed.
root on rd0a swap on rd0b dump on rd0b
WARNING: clock lost 16848 days
WARNING: CHECK AND RESET THE DATE!
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
pmap_fault_fixup: va 00008000 ftype 5 u pte 7ff3802e
[ snip similar lines pmap_fault_fixup ...]
uvm_fault(0xca4a9130, 8000, 2, 0) -> d
Fatal kernel mode data abort: 'Translation Fault (P)'
trapframe: 0xcc3cede0
DFSR=00002807, DFAR=00008000, spsr=80000113
r0 =00008000, r1 =00000fff, r2 =00000000, r3 =0000003f
r4 =cc3cf000, r5 =ca47e004, r6 =00000005, r7 =00000000
r8 =c0a6a9e8, r9 =c0a6b1a0, r10=c0a6a9e8, r11=cc3cee74
r12=00000040, ssp=cc3cee2c, slr=c041048c, pc =c0408d28
panic: Fatal abort
Is it a known issue ?
Thanks !
Best
oc
--
Olivier Cherrier
mailto:[email protected]
