Hello,
Same problem here.
I didn't paid attention because I prefere to boot from a SD card.
Here is my console output at boot :
U-Boot SPL 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06)
U-Boot 2015.01-00001-gb2412df (Jan 29 2015 - 15:01:06), Build:
jenkins-github_Bootloader-Builder-105
Watchdog enabled
I2C: ready
DRAM: 512 MiB
MMC: OMAP SD/MMC: 0, OMAP SD/MMC: 1
Using default environment
Net: <ethaddr> not set. Validating first E-fuse MAC
cpsw
Hit any key to stop autoboot: 0
gpio: pin 53 (gpio 53) value is 1
switch to partitions #0, OK
mmc0 is current device
gpio: pin 54 (gpio 54) value is 1
Checking for: /uEnv.txt ...
reading uEnv.txt
158 bytes read in 4 ms (38.1 KiB/s)
gpio: pin 55 (gpio 55) value is 1
Loaded environment from uEnv.txt
Importing environment from mmc ...
Checking if uenvcmd is set ...
gpio: pin 56 (gpio 56) value is 1
Running uenvcmd ...
reading bsd.umg
4672452 bytes read in 256 ms (17.4 MiB/s)
## Booting kernel from Legacy Image at 82800000 ...
Image Name: boot
Created: 2016-03-28 2:37:48 UTC
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 4672388 Bytes = 4.5 MiB
Load Address: 80300000
Entry Point: 80300000
Verifying Checksum ... OK
Loading Kernel Image ... OK
Starting kernel ...
OpenBSD/omap booting ...
arg0 0x0 arg1 0xe05 arg2 0x80000100
atag core flags 0 pagesize 0 rootdev 0
atag cmdline [sd0i:/bsd.umg]
atag mem start 0x80000000 size 0x20000000
bootfile: sd0i:/bsd.umg
bootargs:
memory size derived from u-boot
bootconf.mem[0].address = 80000000 pages 131072/0x20000000
Allocating page tables
freestart = 0x80775000, free_pages = 129163 (0x0001f88b)
IRQ stack: p0x807a3000 v0xc07a3000
ABT stack: p0x807a4000 v0xc07a4000
UND stack: p0x807a5000 v0xc07a5000
SVC stack: p0x807a6000 v0xc07a6000
Creating L1 page table at 0x80778000
Mapping kernel
Constructing L2 page tables
undefined page pmap [ using 397496 bytes of bsd ELF symbol table ]
board type: 3589
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.
http://www.OpenBSD.org
OpenBSD 5.9-current (GENERIC) #195: Mon Mar 28 13:37:31 AEDT 2016
(...)
Le 04/22/16 12:32, Jonathan Gray a écrit :
> On Fri, Apr 22, 2016 at 10:10:10AM +0000, Karel W. Dingeldey wrote:
>>
>>
>> Hi everyone,
>>
>> I'm currently using OpenBSD 5.7 and 5.8 on a couple of BBBs -- works
>> like a charm.
>>
>> Since 5.9 came out a couple of days ago, I wanted to use it on another
>> BBB (new install).
>>
>> When it comes to stating which hard drive it should install to (eMMC in
>> this instance), I can only select sd0, which is the SD card. For some
>> reason the eMMC isn't recognised anymore in this version.
>>
>> In the change log I saw that some amendments were made to the sdmmc
>> driver (supposedly to improve eMMC support on devices like the BBB). In
>> my case it has quite the contrary effect.
>>
>> Anyone a similar experience? Maybe a hint how to sort it out?
>>
>> ThanksKarel
>>
>>
> Which version of u-boot are you using? It seems newer versions may be
> causing problems.
>
> Can you include the console output here?
>
