On Mon, May 23, 2016 at 01:58:44PM -0600, Aaron Bieber wrote:
> Simply flashing the miniroot image onto an SD card and booting will
> result in:
>
> reading uEnv.txt
> 162 bytes read in 3 ms (52.7 KiB/s)
> Importing environment from mmc0 ...
> Running uenvcmd ...
> reading bsdrd.umg
> 10883512 bytes read in 507 ms (20.5 MiB/s)
> ## Booting kernel from Legacy Image at 82800000 ...
> Image Name: boot
> Image Type: ARM Linux Kernel Image (uncompressed)
> Data Size: 10883448 Bytes = 10.4 MiB
> Load Address: 80300000
> Entry Point: 80300000
> Verifying Checksum ... OK
> Loading Kernel Image ... Image too large: increase
> CONFIG_SYS_BOOTM_LEN
> Must RESET board to recover
> resetting ...
>
> U-Boot SPL 2015.10 (Feb 01 2016 - 13:59:48)
> OMAP4460 ES1.1
The miniroots are built with u-boot 2016.05 why do you have
this version? There is no uEnv.txt only a boot.scr
Can you send the output of printenv and try
setenv loadaddr 0x82800000 ;
run findfdt ;
load mmc ${mmcdev}:1 ${loadaddr} bsd.umg ;
load mmc ${mmcdev}:1 ${fdt_addr_r} ${fdtfile} ;
bootm ${loadaddr} - ${fdt_addr_r} ;
>
> I was able to get the image to boot by bumping CONFIG_SYS_BOOTM_LEN, but
> then I run into this:
>
> Available disks are: sd0.
> Which disk is the root disk? ('?' for details) [sd0]
> Disk: sd0 geometry: 1936/255/63 [31116288 Sectors]
> Offset: 0 Signature: 0xAA55
> Starting Ending LBA Info:
> #: id C H S - C H S [ start: size ]
> -------------------------------------------------------------------------------
> *0: 0C 0 1 1 - 1 254 63 [ 63: 32067 ]
> Win95 FAT32L
> 1: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> unused
> 2: 00 0 0 0 - 0 0 0 [ 0: 0 ]
> unused
> 3: A6 0 1 2 - 1 254 63 [ 64: 32066 ]
> OpenBSD
> Use (W)hole disk$ or (E)dit the MBR? [whole]
> Creating a msdos partition and an OpenBSD partition for rest of
> sd0...done.
> /dev/rsd0i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63
> hds=255 hid=64
> The auto-allocated layout for sd0 is:
> # size offset fstype [fsize bsize cpg]
> a: 480.5M 32832 4.2BSD 2048 16384 1 # /
> b: 880.9M 1016832 swap
> c: 15193.5M 0 unused
> d: 760.7M 2821024 4.2BSD 2048 16384 1 # /tmp
> e: 1121.2M 4379008 4.2BSD 2048 16384 1 # /var
> f: 1300.5M 6675264 4.2BSD 2048 16384 1 # /usr
> g: 752.3M 9338624 4.2BSD 2048 16384 1 #
> /usr/X11R6
> h: 2848.9M 10879296 4.2BSD 2048 16384 1 #
> /usr/local
> i: 16.0M 64 MSDOS
> j: 1184.2M 16713920 4.2BSD 2048 16384 1 #
> /usr/src
> k: 1620.4M 19139136 4.2BSD 2048 16384 1 #
> /usr/obj
> l: 4227.8M 22457664 4.2BSD 2048 16384 1 # /home
> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a]
> newfs: reduced number of fragments per cylinder group from 61496 to
> 61248 to enlarge last cylinder group
> /dev/rsd0a: 480.5MB in 984000 sectors of 512 bytes
> 5 cylinder groups of 119.62MB, 7656 blocks, 15360 inodes each
> newfs: wtfs: write error on block 32: Input/output error
> newfs: fc637acb15c90d77.l: No such file or directory
> newfs: fc637acb15c90d77.d: No such file or directory
> newfs: fc637acb15c90d77.f: No such file or directory
> newfs: fc637acb15c90d77.g: No such file or directory
> newfs: fc637acb15c90d77.h: No such file or directory
> newfs: fc637acb15c90d77.k: No such file or directory
> newfs: fc637acb15c90d77.j: No such file or directory
> newfs: fc637acb15c90d77.e: No such file or directory
> mount_ffs: fc637acb15c90d77.a on /mnt: No such file or directory
>
> mount_ffs: fc637acb15c90d77.l on /mnt/home: No such file or directory
>
> mount_ffs: fc637acb15c90d77.d on /mnt/tmp: No such file or directory
>
> mount_ffs: fc637acb15c90d77.f on /mnt/usr: No such file or directory
>
> mount_ffs: fc637acb15c90d77.g on /mnt/usr/X11R6: No such file or
> directory
>
> mount_ffs: fc637acb15c90d77.h on /mnt/usr/local: No such file or
> directory
>
> mount_ffs: fc637acb15c90d77.k on /mnt/usr/obj: No such file or directory
>
> mount_ffs: fc637acb15c90d77.j on /mnt/usr/src: No such file or directory
>
> mount_ffs: fc637acb15c90d77.e on /mnt/var: No such file or directory
>
>
> Anyone have any suggestions?
>
