On Fri, Sep 02, 2016 at 08:08:02PM +1000, Simon Fryer wrote: > Hi, > > 1) Read the FAQ for the definition of stable, snapshots and development. In > short, I am running 5.9. > > 2) My BBB (a Element 14 / Farnell version) seems to boot happily from the > mmc card without prompting so I can't provide definite advice here. > Personally, I would be holding the button down until I saw the BBB boot > from the MMC card. > > 3) I use kermit (in ports). I have a physical serial port but /dev/U0 would > be my guess. > set port /dev/ttyU0 > set speed 115200 > set carrier-watch off > set flow-control none > c > > Good luck.
No need for ports just use cu(1) cu -l cuaU0 -s 115200 > > Simon. > > On 2 September 2016 at 19:16, Tuyosi T <[email protected]> wrote: > > > hi all . > > > > as BBB beginner i have 3 questions > > > > 1) which miniroot-am335x virsion is easy ? > > 6.0 , 5.9 , 5.8 or snapshots > > > > 2) how long time do i need pushing switch S2 ? > > 3 seconds , 10 seconds or more > > > > 3) which /dev is good with ' USB to UART TTL connecter ' ? > > i think 'cu -l cua00 -s 115200 ' is not good . > > > > ----- > > regards > > > > > > -- > Simon > > -- > ------------------------------------------------------------------------ > "Well, an engineer is not concerned with the truth; that is left to > philosophers and theologians: the prime concern of an engineer is > the utility of the final product." > Lectures on the Electrical Properties of Materials, L.Solymar, D.Walsh
